On Fri, 2022-12-16 at 15:36 +0100, Sjoerd Simons wrote: > > This series picks up a few patches from the TI BSP tree that > unfortunately didn't make it upstream thusfar. > > The first patch improve SD card compatibility (allowing U1 class > cards > to be used), the remaining ones add USB support. > > The type-c connector isn't entirely modelled with these changes as > it goes through a TPS6598 PD controller. Unfortunately the dtb > bindings > for that currently require an irq line, which is not connected on E1 > and > E2 version boards. The patchese to support this setup unfortunately > didn't land > yet[0].. As such the last patch ignored the PD controller and simply > configures usb0 as periphal only rather then mode switch capable, > which > at least gives some basic usability of that USB port. > > 0: > https://lore.kernel.org/lkml/f714ee55-ef47-317d-81b9-57020dda064b@xxxxxx/T/ > > Series tested with known problematic SD Card and checking for detection of inserted USB device. Tested-by: Martyn Welch <martyn.welch@xxxxxxxxxxxxx> > Aswath Govindraju (2): > arm64: dts: ti: k3-am62-main: Add support for USB > arm64: dts: ti: k3-am625-sk: Add support for USB > > Nitin Yadav (1): > arm64: dts: ti: k3-am62-main: Update OTAP and ITAP delay select > > arch/arm64/boot/dts/ti/k3-am62-main.dtsi | 90 ++++++++++++++++++---- > -- > arch/arm64/boot/dts/ti/k3-am625-sk.dts | 22 ++++++ > 2 files changed, 90 insertions(+), 22 deletions(-) >
