On 2022-12-16 22:58:18, Marijn Suijten wrote:
> When enabling the APPS SMMU the mainline driver reconfigures the SMMU
> from its bootloader configuration, loosing the stream mapping for (among
> which) the SDHCI hardware and breaking its ADMA feature. This feature
> can be disabled with:
>
> sdhci.debug_quirks=0x40
>
> But it is of course desired to have this feature enabled and working
> through the SMMU.
>
> Signed-off-by: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
> ---
> arch/arm64/boot/dts/qcom/sm6125.dtsi | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm6125.dtsi b/arch/arm64/boot/dts/qcom/sm6125.dtsi
> index 347665c2067c..f560499cc0ca 100644
> --- a/arch/arm64/boot/dts/qcom/sm6125.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm6125.dtsi
> @@ -468,6 +468,7 @@ sdhc_1: mmc@4744000 {
> <&gcc GCC_SDCC1_APPS_CLK>,
> <&xo_board>;
> clock-names = "iface", "core", "xo";
> + iommus = <&apps_smmu 0x160 0>;
I'll make the mask 0x0 (same below) in the next revision, please do not
apply this patch.
- Marijn
> power-domains = <&rpmpd SM6125_VDDCX>;
>
> @@ -494,6 +495,7 @@ sdhc_2: mmc@4784000 {
> <&gcc GCC_SDCC2_APPS_CLK>,
> <&xo_board>;
> clock-names = "iface", "core", "xo";
> + iommus = <&apps_smmu 0x180 0>;
>
> pinctrl-0 = <&sdc2_on_state>;
> pinctrl-1 = <&sdc2_off_state>;
> --
> 2.39.0
>
