[PATCH v3 0/4] arm64: dts: qcom: enable sa8540p-ride rtc

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Enable sa8540p-ride rtc on pmic@0.

sa8540p base boards share the same pmics description, currently in
pm8450a.dtsi. Rename the file to make this explicit and use it in both
sa8540p-ride.dts and sa8295p-adp.dts.
Add the missing offset where appropriate for the alarm register bank in
other qcom,pm8941-rtc description.

Changes since v2:
- rename pm8450a.dtsi to sa8540p-pmics.dtsi.

Changes since v1:
- Add "alarm" register bank offset at 0x6100 in qcom,pm8941-rtc
  descriptions.

Eric Chanudet (4):
  arm64: dts: qcom: rename pm8450a dtsi to sa8540p-pmics
  arm64: dts: qcom: sa8450p-pmics: add rtc node
  arm64: dts: qcom: sa8295p-adp: use sa8540p-pmics
  arm64: dts: qcom: pm8941-rtc add alarm register

 arch/arm64/boot/dts/qcom/pm8150.dtsi          |  2 +-
 arch/arm64/boot/dts/qcom/pm8916.dtsi          |  3 +-
 arch/arm64/boot/dts/qcom/pm8950.dtsi          |  2 +-
 arch/arm64/boot/dts/qcom/pmm8155au_1.dtsi     |  2 +-
 arch/arm64/boot/dts/qcom/pmp8074.dtsi         |  2 +-
 arch/arm64/boot/dts/qcom/pms405.dtsi          |  2 +-
 arch/arm64/boot/dts/qcom/sa8295p-adp.dts      | 79 +------------------
 .../qcom/{pm8450a.dtsi => sa8540p-pmics.dtsi} |  8 ++
 arch/arm64/boot/dts/qcom/sa8540p-ride.dts     |  2 +-
 9 files changed, 17 insertions(+), 85 deletions(-)
 rename arch/arm64/boot/dts/qcom/{pm8450a.dtsi => sa8540p-pmics.dtsi} (90%)

-- 
2.38.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux