On 13.12.2022 14:06, Durai Manickam KR wrote: > From: Manikandan Muralidharan <manikandan.m@xxxxxxxxxxxxx> > > Added the missing flexcom functions for all the flexcom nodes. > > Signed-off-by: Manikandan Muralidharan <manikandan.m@xxxxxxxxxxxxx> > [durai.manickamkr@xxxxxxxxxxxxx: added missing #address-cells > and #size-cells properties] I don't see any of these added. > Signed-off-by: Durai Manickam KR <durai.manickamkr@xxxxxxxxxxxxx> > --- > arch/arm/boot/dts/sam9x60.dtsi | 545 +++++++++++++++++++++++++++++++++ > 1 file changed, 545 insertions(+) > > diff --git a/arch/arm/boot/dts/sam9x60.dtsi b/arch/arm/boot/dts/sam9x60.dtsi > index 9e6434ee0c4b..8bdd6def13cc 100644 > --- a/arch/arm/boot/dts/sam9x60.dtsi > +++ b/arch/arm/boot/dts/sam9x60.dtsi > @@ -171,6 +171,27 @@ flx4: flexcom@f0000000 { > ranges = <0x0 0xf0000000 0x800>; > status = "disabled"; > > + uart4: serial@200 { > + compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; > + reg = <0x200 0x200>; > + interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>; > + dmas = <&dma0 > + (AT91_XDMAC_DT_MEM_IF(0) | > + AT91_XDMAC_DT_PER_IF(1) | > + AT91_XDMAC_DT_PERID(8))>, > + <&dma0 > + (AT91_XDMAC_DT_MEM_IF(0) | > + AT91_XDMAC_DT_PER_IF(1) | > + AT91_XDMAC_DT_PERID(9))>; > + dma-names = "tx", "rx"; > + clocks = <&pmc PMC_TYPE_PERIPHERAL 13>; > + clock-names = "usart"; > + atmel,use-dma-rx; > + atmel,use-dma-tx; > + atmel,fifo-size = <16>; > + status = "disabled"; > + }; > + > spi4: spi@400 { > compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi"; > reg = <0x400 0x200>; > @@ -189,6 +210,24 @@ AT91_XDMAC_DT_PER_IF(1) | > atmel,fifo-size = <16>; > status = "disabled"; > }; > + > + i2c4: i2c@600 { > + compatible = "microchip,sam9x60-i2c"; > + reg = <0x600 0x200>; > + interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>; > + clocks = <&pmc PMC_TYPE_PERIPHERAL 13>; > + dmas = <&dma0 > + (AT91_XDMAC_DT_MEM_IF(0) | > + AT91_XDMAC_DT_PER_IF(1) | > + AT91_XDMAC_DT_PERID(8))>, > + <&dma0 > + (AT91_XDMAC_DT_MEM_IF(0) | > + AT91_XDMAC_DT_PER_IF(1) | > + AT91_XDMAC_DT_PERID(9))>; > + dma-names = "tx", "rx"; > + atmel,fifo-size = <16>; > + status = "disabled"; > + }; > }; > > flx5: flexcom@f0004000 { > @@ -220,6 +259,43 @@ AT91_XDMAC_DT_PER_IF(1) | > atmel,fifo-size = <16>; > status = "disabled"; > }; > + > + spi5: spi@400 { > + compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi"; > + reg = <0x400 0x200>; > + interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>; > + clocks = <&pmc PMC_TYPE_PERIPHERAL 14>; > + clock-names = "spi_clk"; > + dmas = <&dma0 > + (AT91_XDMAC_DT_MEM_IF(0) | > + AT91_XDMAC_DT_PER_IF(1) | > + AT91_XDMAC_DT_PERID(10))>, > + <&dma0 > + (AT91_XDMAC_DT_MEM_IF(0) | > + AT91_XDMAC_DT_PER_IF(1) | > + AT91_XDMAC_DT_PERID(11))>; > + dma-names = "tx", "rx"; > + atmel,fifo-size = <16>; > + status = "disabled"; > + }; > + > + i2c5: i2c@600 { > + compatible = "microchip,sam9x60-i2c"; > + reg = <0x600 0x200>; > + interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>; > + clocks = <&pmc PMC_TYPE_PERIPHERAL 14>; > + dmas = <&dma0 > + (AT91_XDMAC_DT_MEM_IF(0) | > + AT91_XDMAC_DT_PER_IF(1) | > + AT91_XDMAC_DT_PERID(10))>, > + <&dma0 > + (AT91_XDMAC_DT_MEM_IF(0) | > + AT91_XDMAC_DT_PER_IF(1) | > + AT91_XDMAC_DT_PERID(11))>; > + dma-names = "tx", "rx"; > + atmel,fifo-size = <16>; > + status = "disabled"; > + }; > }; > > dma0: dma-controller@f0008000 { > @@ -291,6 +367,45 @@ flx11: flexcom@f0020000 { > #size-cells = <1>; > ranges = <0x0 0xf0020000 0x800>; > status = "disabled"; > + > + uart11: serial@200 { > + compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; > + reg = <0x200 0x200>; > + interrupts = <32 IRQ_TYPE_LEVEL_HIGH 7>; > + dmas = <&dma0 > + (AT91_XDMAC_DT_MEM_IF(0) | > + AT91_XDMAC_DT_PER_IF(1) | > + AT91_XDMAC_DT_PERID(22))>, > + <&dma0 > + (AT91_XDMAC_DT_MEM_IF(0) | > + AT91_XDMAC_DT_PER_IF(1) | > + AT91_XDMAC_DT_PERID(23))>; > + dma-names = "tx", "rx"; > + clocks = <&pmc PMC_TYPE_PERIPHERAL 32>; > + clock-names = "usart"; > + atmel,use-dma-rx; > + atmel,use-dma-tx; > + atmel,fifo-size = <16>; > + status = "disabled"; > + }; > + > + i2c11: i2c@600 { > + compatible = "microchip,sam9x60-i2c"; > + reg = <0x600 0x200>; > + interrupts = <32 IRQ_TYPE_LEVEL_HIGH 7>; > + clocks = <&pmc PMC_TYPE_PERIPHERAL 32>; > + dmas = <&dma0 > + (AT91_XDMAC_DT_MEM_IF(0) | > + AT91_XDMAC_DT_PER_IF(1) | > + AT91_XDMAC_DT_PERID(22))>, > + <&dma0 > + (AT91_XDMAC_DT_MEM_IF(0) | > + AT91_XDMAC_DT_PER_IF(1) | > + AT91_XDMAC_DT_PERID(23))>; > + dma-names = "tx", "rx"; > + atmel,fifo-size = <16>; > + status = "disabled"; > + }; > }; > > flx12: flexcom@f0024000 { > @@ -301,6 +416,45 @@ flx12: flexcom@f0024000 { > #size-cells = <1>; > ranges = <0x0 0xf0024000 0x800>; > status = "disabled"; > + > + uart12: serial@200 { > + compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; > + reg = <0x200 0x200>; > + interrupts = <33 IRQ_TYPE_LEVEL_HIGH 7>; > + dmas = <&dma0 > + (AT91_XDMAC_DT_MEM_IF(0) | > + AT91_XDMAC_DT_PER_IF(1) | > + AT91_XDMAC_DT_PERID(24))>, > + <&dma0 > + (AT91_XDMAC_DT_MEM_IF(0) | > + AT91_XDMAC_DT_PER_IF(1) | > + AT91_XDMAC_DT_PERID(25))>; > + dma-names = "tx", "rx"; > + clocks = <&pmc PMC_TYPE_PERIPHERAL 33>; > + clock-names = "usart"; > + atmel,use-dma-rx; > + atmel,use-dma-tx; > + atmel,fifo-size = <16>; > + status = "disabled"; > + }; > + > + i2c12: i2c@600 { > + compatible = "microchip,sam9x60-i2c"; > + reg = <0x600 0x200>; > + interrupts = <33 IRQ_TYPE_LEVEL_HIGH 7>; > + clocks = <&pmc PMC_TYPE_PERIPHERAL 33>; > + dmas = <&dma0 > + (AT91_XDMAC_DT_MEM_IF(0) | > + AT91_XDMAC_DT_PER_IF(1) | > + AT91_XDMAC_DT_PERID(24))>, > + <&dma0 > + (AT91_XDMAC_DT_MEM_IF(0) | > + AT91_XDMAC_DT_PER_IF(1) | > + AT91_XDMAC_DT_PERID(25))>; > + dma-names = "tx", "rx"; > + atmel,fifo-size = <16>; > + status = "disabled"; > + }; > }; > > pit64b: timer@f0028000 { > @@ -420,6 +574,27 @@ flx6: flexcom@f8010000 { > ranges = <0x0 0xf8010000 0x800>; > status = "disabled"; > > + uart6: serial@200 { > + compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; > + reg = <0x200 0x200>; > + interrupts = <9 IRQ_TYPE_LEVEL_HIGH 7>; > + dmas = <&dma0 > + (AT91_XDMAC_DT_MEM_IF(0) | > + AT91_XDMAC_DT_PER_IF(1) | > + AT91_XDMAC_DT_PERID(12))>, > + <&dma0 > + (AT91_XDMAC_DT_MEM_IF(0) | > + AT91_XDMAC_DT_PER_IF(1) | > + AT91_XDMAC_DT_PERID(13))>; > + dma-names = "tx", "rx"; > + clocks = <&pmc PMC_TYPE_PERIPHERAL 9>; > + clock-names = "usart"; > + atmel,use-dma-rx; > + atmel,use-dma-tx; > + atmel,fifo-size = <16>; > + status = "disabled"; > + }; > + > i2c6: i2c@600 { > compatible = "microchip,sam9x60-i2c"; > reg = <0x600 0x200>; > @@ -447,6 +622,45 @@ flx7: flexcom@f8014000 { > #size-cells = <1>; > ranges = <0x0 0xf8014000 0x800>; > status = "disabled"; > + > + uart7: serial@200 { > + compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; > + reg = <0x200 0x200>; > + interrupts = <10 IRQ_TYPE_LEVEL_HIGH 7>; > + dmas = <&dma0 > + (AT91_XDMAC_DT_MEM_IF(0) | > + AT91_XDMAC_DT_PER_IF(1) | > + AT91_XDMAC_DT_PERID(14))>, > + <&dma0 > + (AT91_XDMAC_DT_MEM_IF(0) | > + AT91_XDMAC_DT_PER_IF(1) | > + AT91_XDMAC_DT_PERID(15))>; > + dma-names = "tx", "rx"; > + clocks = <&pmc PMC_TYPE_PERIPHERAL 10>; > + clock-names = "usart"; > + atmel,use-dma-rx; > + atmel,use-dma-tx; > + atmel,fifo-size = <16>; > + status = "disabled"; > + }; > + > + i2c7: i2c@600 { > + compatible = "microchip,sam9x60-i2c"; > + reg = <0x600 0x200>; > + interrupts = <10 IRQ_TYPE_LEVEL_HIGH 7>; > + clocks = <&pmc PMC_TYPE_PERIPHERAL 10>; > + dmas = <&dma0 > + (AT91_XDMAC_DT_MEM_IF(0) | > + AT91_XDMAC_DT_PER_IF(1) | > + AT91_XDMAC_DT_PERID(14))>, > + <&dma0 > + (AT91_XDMAC_DT_MEM_IF(0) | > + AT91_XDMAC_DT_PER_IF(1) | > + AT91_XDMAC_DT_PERID(15))>; > + dma-names = "tx", "rx"; > + atmel,fifo-size = <16>; > + status = "disabled"; > + }; > }; > > flx8: flexcom@f8018000 { > @@ -457,6 +671,45 @@ flx8: flexcom@f8018000 { > #size-cells = <1>; > ranges = <0x0 0xf8018000 0x800>; > status = "disabled"; > + > + uart8: serial@200 { > + compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; > + reg = <0x200 0x200>; > + interrupts = <11 IRQ_TYPE_LEVEL_HIGH 7>; > + dmas = <&dma0 > + (AT91_XDMAC_DT_MEM_IF(0) | > + AT91_XDMAC_DT_PER_IF(1) | > + AT91_XDMAC_DT_PERID(16))>, > + <&dma0 > + (AT91_XDMAC_DT_MEM_IF(0) | > + AT91_XDMAC_DT_PER_IF(1) | > + AT91_XDMAC_DT_PERID(17))>; > + dma-names = "tx", "rx"; > + clocks = <&pmc PMC_TYPE_PERIPHERAL 11>; > + clock-names = "usart"; > + atmel,use-dma-rx; > + atmel,use-dma-tx; > + atmel,fifo-size = <16>; > + status = "disabled"; > + }; > + > + i2c8: i2c@600 { > + compatible = "microchip,sam9x60-i2c"; > + reg = <0x600 0x200>; > + interrupts = <11 IRQ_TYPE_LEVEL_HIGH 7>; > + clocks = <&pmc PMC_TYPE_PERIPHERAL 11>; > + dmas = <&dma0 > + (AT91_XDMAC_DT_MEM_IF(0) | > + AT91_XDMAC_DT_PER_IF(1) | > + AT91_XDMAC_DT_PERID(16))>, > + <&dma0 > + (AT91_XDMAC_DT_MEM_IF(0) | > + AT91_XDMAC_DT_PER_IF(1) | > + AT91_XDMAC_DT_PERID(17))>; > + dma-names = "tx", "rx"; > + atmel,fifo-size = <16>; > + status = "disabled"; > + }; > }; > > flx0: flexcom@f801c000 { > @@ -468,6 +721,46 @@ flx0: flexcom@f801c000 { > ranges = <0x0 0xf801c000 0x800>; > status = "disabled"; > > + uart0: serial@200 { > + compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; > + reg = <0x200 0x200>; > + interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>; > + dmas = <&dma0 > + (AT91_XDMAC_DT_MEM_IF(0) | > + AT91_XDMAC_DT_PER_IF(1) | > + AT91_XDMAC_DT_PERID(0))>, > + <&dma0 > + (AT91_XDMAC_DT_MEM_IF(0) | > + AT91_XDMAC_DT_PER_IF(1) | > + AT91_XDMAC_DT_PERID(1))>; > + dma-names = "tx", "rx"; > + clocks = <&pmc PMC_TYPE_PERIPHERAL 5>; > + clock-names = "usart"; > + atmel,use-dma-rx; > + atmel,use-dma-tx; > + atmel,fifo-size = <16>; > + status = "disabled"; > + }; > + > + spi0: spi@400 { > + compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi"; > + reg = <0x400 0x200>; > + interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>; > + clocks = <&pmc PMC_TYPE_PERIPHERAL 5>; > + clock-names = "spi_clk"; > + dmas = <&dma0 > + (AT91_XDMAC_DT_MEM_IF(0) | > + AT91_XDMAC_DT_PER_IF(1) | > + AT91_XDMAC_DT_PERID(0))>, > + <&dma0 > + (AT91_XDMAC_DT_MEM_IF(0) | > + AT91_XDMAC_DT_PER_IF(1) | > + AT91_XDMAC_DT_PERID(1))>; > + dma-names = "tx", "rx"; > + atmel,fifo-size = <16>; > + status = "disabled"; > + }; > + > i2c0: i2c@600 { > compatible = "microchip,sam9x60-i2c"; > reg = <0x600 0x200>; > @@ -497,6 +790,64 @@ flx1: flexcom@f8020000 { > #size-cells = <1>; > ranges = <0x0 0xf8020000 0x800>; > status = "disabled"; > + > + uart1: serial@200 { > + compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; > + reg = <0x200 0x200>; > + interrupts = <6 IRQ_TYPE_LEVEL_HIGH 7>; > + dmas = <&dma0 > + (AT91_XDMAC_DT_MEM_IF(0) | > + AT91_XDMAC_DT_PER_IF(1) | > + AT91_XDMAC_DT_PERID(2))>, > + <&dma0 > + (AT91_XDMAC_DT_MEM_IF(0) | > + AT91_XDMAC_DT_PER_IF(1) | > + AT91_XDMAC_DT_PERID(3))>; > + dma-names = "tx", "rx"; > + clocks = <&pmc PMC_TYPE_PERIPHERAL 6>; > + clock-names = "usart"; > + atmel,use-dma-rx; > + atmel,use-dma-tx; > + atmel,fifo-size = <16>; > + status = "disabled"; > + }; > + > + spi1: spi@400 { > + compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi"; > + reg = <0x400 0x200>; > + interrupts = <6 IRQ_TYPE_LEVEL_HIGH 7>; > + clocks = <&pmc PMC_TYPE_PERIPHERAL 6>; > + clock-names = "spi_clk"; > + dmas = <&dma0 > + (AT91_XDMAC_DT_MEM_IF(0) | > + AT91_XDMAC_DT_PER_IF(1) | > + AT91_XDMAC_DT_PERID(2))>, > + <&dma0 > + (AT91_XDMAC_DT_MEM_IF(0) | > + AT91_XDMAC_DT_PER_IF(1) | > + AT91_XDMAC_DT_PERID(3))>; > + dma-names = "tx", "rx"; > + atmel,fifo-size = <16>; > + status = "disabled"; > + }; > + > + i2c1: i2c@600 { > + compatible = "microchip,sam9x60-i2c"; > + reg = <0x600 0x200>; > + interrupts = <6 IRQ_TYPE_LEVEL_HIGH 7>; > + clocks = <&pmc PMC_TYPE_PERIPHERAL 6>; > + dmas = <&dma0 > + (AT91_XDMAC_DT_MEM_IF(0) | > + AT91_XDMAC_DT_PER_IF(1) | > + AT91_XDMAC_DT_PERID(2))>, > + <&dma0 > + (AT91_XDMAC_DT_MEM_IF(0) | > + AT91_XDMAC_DT_PER_IF(1) | > + AT91_XDMAC_DT_PERID(3))>; > + dma-names = "tx", "rx"; > + atmel,fifo-size = <16>; > + status = "disabled"; > + }; > }; > > flx2: flexcom@f8024000 { > @@ -507,6 +858,64 @@ flx2: flexcom@f8024000 { > #size-cells = <1>; > ranges = <0x0 0xf8024000 0x800>; > status = "disabled"; > + > + uart2: serial@200 { > + compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; > + reg = <0x200 0x200>; > + interrupts = <7 IRQ_TYPE_LEVEL_HIGH 7>; > + dmas = <&dma0 > + (AT91_XDMAC_DT_MEM_IF(0) | > + AT91_XDMAC_DT_PER_IF(1) | > + AT91_XDMAC_DT_PERID(4))>, > + <&dma0 > + (AT91_XDMAC_DT_MEM_IF(0) | > + AT91_XDMAC_DT_PER_IF(1) | > + AT91_XDMAC_DT_PERID(5))>; > + dma-names = "tx", "rx"; > + clocks = <&pmc PMC_TYPE_PERIPHERAL 7>; > + clock-names = "usart"; > + atmel,use-dma-rx; > + atmel,use-dma-tx; > + atmel,fifo-size = <16>; > + status = "disabled"; > + }; > + > + spi2: spi@400 { > + compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi"; > + reg = <0x400 0x200>; > + interrupts = <7 IRQ_TYPE_LEVEL_HIGH 7>; > + clocks = <&pmc PMC_TYPE_PERIPHERAL 7>; > + clock-names = "spi_clk"; > + dmas = <&dma0 > + (AT91_XDMAC_DT_MEM_IF(0) | > + AT91_XDMAC_DT_PER_IF(1) | > + AT91_XDMAC_DT_PERID(4))>, > + <&dma0 > + (AT91_XDMAC_DT_MEM_IF(0) | > + AT91_XDMAC_DT_PER_IF(1) | > + AT91_XDMAC_DT_PERID(5))>; > + dma-names = "tx", "rx"; > + atmel,fifo-size = <16>; > + status = "disabled"; > + }; > + > + i2c2: i2c@600 { > + compatible = "microchip,sam9x60-i2c"; > + reg = <0x600 0x200>; > + interrupts = <7 IRQ_TYPE_LEVEL_HIGH 7>; > + clocks = <&pmc PMC_TYPE_PERIPHERAL 7>; > + dmas = <&dma0 > + (AT91_XDMAC_DT_MEM_IF(0) | > + AT91_XDMAC_DT_PER_IF(1) | > + AT91_XDMAC_DT_PERID(4))>, > + <&dma0 > + (AT91_XDMAC_DT_MEM_IF(0) | > + AT91_XDMAC_DT_PER_IF(1) | > + AT91_XDMAC_DT_PERID(5))>; > + dma-names = "tx", "rx"; > + atmel,fifo-size = <16>; > + status = "disabled"; > + }; > }; > > flx3: flexcom@f8028000 { > @@ -517,6 +926,64 @@ flx3: flexcom@f8028000 { > #size-cells = <1>; > ranges = <0x0 0xf8028000 0x800>; > status = "disabled"; > + > + uart3: serial@200 { > + compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; > + reg = <0x200 0x200>; > + interrupts = <8 IRQ_TYPE_LEVEL_HIGH 7>; > + dmas = <&dma0 > + (AT91_XDMAC_DT_MEM_IF(0) | > + AT91_XDMAC_DT_PER_IF(1) | > + AT91_XDMAC_DT_PERID(6))>, > + <&dma0 > + (AT91_XDMAC_DT_MEM_IF(0) | > + AT91_XDMAC_DT_PER_IF(1) | > + AT91_XDMAC_DT_PERID(7))>; > + dma-names = "tx", "rx"; > + clocks = <&pmc PMC_TYPE_PERIPHERAL 8>; > + clock-names = "usart"; > + atmel,use-dma-rx; > + atmel,use-dma-tx; > + atmel,fifo-size = <16>; > + status = "disabled"; > + }; > + > + spi3: spi@400 { > + compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi"; > + reg = <0x400 0x200>; > + interrupts = <8 IRQ_TYPE_LEVEL_HIGH 7>; > + clocks = <&pmc PMC_TYPE_PERIPHERAL 8>; > + clock-names = "spi_clk"; > + dmas = <&dma0 > + (AT91_XDMAC_DT_MEM_IF(0) | > + AT91_XDMAC_DT_PER_IF(1) | > + AT91_XDMAC_DT_PERID(6))>, > + <&dma0 > + (AT91_XDMAC_DT_MEM_IF(0) | > + AT91_XDMAC_DT_PER_IF(1) | > + AT91_XDMAC_DT_PERID(7))>; > + dma-names = "tx", "rx"; > + atmel,fifo-size = <16>; > + status = "disabled"; > + }; > + > + i2c3: i2c@600 { > + compatible = "microchip,sam9x60-i2c"; > + reg = <0x600 0x200>; > + interrupts = <8 IRQ_TYPE_LEVEL_HIGH 7>; > + clocks = <&pmc PMC_TYPE_PERIPHERAL 8>; > + dmas = <&dma0 > + (AT91_XDMAC_DT_MEM_IF(0) | > + AT91_XDMAC_DT_PER_IF(1) | > + AT91_XDMAC_DT_PERID(6))>, > + <&dma0 > + (AT91_XDMAC_DT_MEM_IF(0) | > + AT91_XDMAC_DT_PER_IF(1) | > + AT91_XDMAC_DT_PERID(7))>; > + dma-names = "tx", "rx"; > + atmel,fifo-size = <16>; > + status = "disabled"; > + }; > }; > > macb0: ethernet@f802c000 { > @@ -582,6 +1049,45 @@ flx9: flexcom@f8040000 { > #size-cells = <1>; > ranges = <0x0 0xf8040000 0x800>; > status = "disabled"; > + > + uart9: serial@200 { > + compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; > + reg = <0x200 0x200>; > + interrupts = <15 IRQ_TYPE_LEVEL_HIGH 7>; > + dmas = <&dma0 > + (AT91_XDMAC_DT_MEM_IF(0) | > + AT91_XDMAC_DT_PER_IF(1) | > + AT91_XDMAC_DT_PERID(18))>, > + <&dma0 > + (AT91_XDMAC_DT_MEM_IF(0) | > + AT91_XDMAC_DT_PER_IF(1) | > + AT91_XDMAC_DT_PERID(19))>; > + dma-names = "tx", "rx"; > + clocks = <&pmc PMC_TYPE_PERIPHERAL 15>; > + clock-names = "usart"; > + atmel,use-dma-rx; > + atmel,use-dma-tx; > + atmel,fifo-size = <16>; > + status = "disabled"; > + }; > + > + i2c9: i2c@600 { > + compatible = "microchip,sam9x60-i2c"; > + reg = <0x600 0x200>; > + interrupts = <15 IRQ_TYPE_LEVEL_HIGH 7>; > + clocks = <&pmc PMC_TYPE_PERIPHERAL 15>; > + dmas = <&dma0 > + (AT91_XDMAC_DT_MEM_IF(0) | > + AT91_XDMAC_DT_PER_IF(1) | > + AT91_XDMAC_DT_PERID(18))>, > + <&dma0 > + (AT91_XDMAC_DT_MEM_IF(0) | > + AT91_XDMAC_DT_PER_IF(1) | > + AT91_XDMAC_DT_PERID(19))>; > + dma-names = "tx", "rx"; > + atmel,fifo-size = <16>; > + status = "disabled"; > + }; > }; > > flx10: flexcom@f8044000 { > @@ -592,6 +1098,45 @@ flx10: flexcom@f8044000 { > #size-cells = <1>; > ranges = <0x0 0xf8044000 0x800>; > status = "disabled"; > + > + uart10: serial@200 { > + compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; > + reg = <0x200 0x200>; > + interrupts = <16 IRQ_TYPE_LEVEL_HIGH 7>; > + dmas = <&dma0 > + (AT91_XDMAC_DT_MEM_IF(0) | > + AT91_XDMAC_DT_PER_IF(1) | > + AT91_XDMAC_DT_PERID(20))>, > + <&dma0 > + (AT91_XDMAC_DT_MEM_IF(0) | > + AT91_XDMAC_DT_PER_IF(1) | > + AT91_XDMAC_DT_PERID(21))>; > + dma-names = "tx", "rx"; > + clocks = <&pmc PMC_TYPE_PERIPHERAL 16>; > + clock-names = "usart"; > + atmel,use-dma-rx; > + atmel,use-dma-tx; > + atmel,fifo-size = <16>; > + status = "disabled"; > + }; > + > + i2c10: i2c@600 { > + compatible = "microchip,sam9x60-i2c"; > + reg = <0x600 0x200>; > + interrupts = <16 IRQ_TYPE_LEVEL_HIGH 7>; > + clocks = <&pmc PMC_TYPE_PERIPHERAL 16>; > + dmas = <&dma0 > + (AT91_XDMAC_DT_MEM_IF(0) | > + AT91_XDMAC_DT_PER_IF(1) | > + AT91_XDMAC_DT_PERID(20))>, > + <&dma0 > + (AT91_XDMAC_DT_MEM_IF(0) | > + AT91_XDMAC_DT_PER_IF(1) | > + AT91_XDMAC_DT_PERID(21))>; > + dma-names = "tx", "rx"; > + atmel,fifo-size = <16>; > + status = "disabled"; > + }; > }; > > isi: isi@f8048000 {