Re: [PATCH v5 6/6] soc: renesas: Add L2 cache management for RZ/Five SoC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 15 December 2022 12:17:38 GMT-08:00, Geert Uytterhoeven <geert@xxxxxxxxxxxxxx> wrote:
>Hi Conor,
>
>On Thu, Dec 15, 2022 at 8:54 PM Conor Dooley <conor@xxxxxxxxxx> wrote:
>> On Thu, Dec 15, 2022 at 05:46:42PM +0000, Lad, Prabhakar wrote:
>> > On Thu, Dec 15, 2022 at 11:10 AM Geert Uytterhoeven
>> > <geert@xxxxxxxxxxxxxx> wrote:
>> > > On Thu, Dec 15, 2022 at 12:06 PM Lad, Prabhakar
>> > > <prabhakar.csengg@xxxxxxxxx> wrote:
>> > > > On Thu, Dec 15, 2022 at 10:36 AM Geert Uytterhoeven
>> > > > <geert@xxxxxxxxxxxxxx> wrote:
>> > > > > On Mon, Dec 12, 2022 at 12:58 PM Prabhakar <prabhakar.csengg@xxxxxxxxx> wrote:
>> > > > > > From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
>> > > > > >
>> > > > > > I/O Coherence Port (IOCP) provides an AXI interface for connecting
>> > > > > > external non-caching masters, such as DMA controllers. The accesses
>> > > > > > from IOCP are coherent with D-Caches and L2 Cache.
>> > > > > >
>> > > > > > IOCP is a specification option and is disabled on the Renesas RZ/Five
>> > > > > > SoC due to this reason IP blocks using DMA will fail.
>> > > > > >
>> > > > > > The Andes AX45MP core has a Programmable Physical Memory Attributes (PMA)
>> > > > > > block that allows dynamic adjustment of memory attributes in the runtime.
>> > > > > > It contains a configurable amount of PMA entries implemented as CSR
>> > > > > > registers to control the attributes of memory locations in interest.
>> > > > > > Below are the memory attributes supported:
>> > > > > > * Device, Non-bufferable
>> > > > > > * Device, bufferable
>> > > > > > * Memory, Non-cacheable, Non-bufferable
>> > > > > > * Memory, Non-cacheable, Bufferable
>> > > > > > * Memory, Write-back, No-allocate
>> > > > > > * Memory, Write-back, Read-allocate
>> > > > > > * Memory, Write-back, Write-allocate
>> > > > > > * Memory, Write-back, Read and Write-allocate
>> > > > > >
>> > > > > > More info about PMA (section 10.3):
>> > > > > > Link: http://www.andestech.com/wp-content/uploads/AX45MP-1C-Rev.-5.0.0-Datasheet.pdf
>> > > > > >
>> > > > > > As a workaround for SoCs with IOCP disabled CMO needs to be handled by
>> > > > > > software. Firstly OpenSBI configures the memory region as
>> > > > > > "Memory, Non-cacheable, Bufferable" and passes this region as a global
>> > > > > > shared dma pool as a DT node. With DMA_GLOBAL_POOL enabled all DMA
>> > > > > > allocations happen from this region and synchronization callbacks are
>> > > > > > implemented to synchronize when doing DMA transactions.
>> > > > > >
>> > > > > > Example PMA region passes as a DT node from OpenSBI:
>> > > > > >     reserved-memory {
>> > > > > >         #address-cells = <2>;
>> > > > > >         #size-cells = <2>;
>> > > > > >         ranges;
>> > > > > >
>> > > > > >         pma_resv0@58000000 {
>> > > > > >             compatible = "shared-dma-pool";
>> > > > > >             reg = <0x0 0x58000000 0x0 0x08000000>;
>> > > > > >             no-map;
>> > > > > >             linux,dma-default;
>> > > > > >         };
>> > > > > >     };
>> > > > > >
>> > > > > > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
>> > > > >
>> > > > > Thanks for your patch!
>> > > > >
>> > > > > >  arch/riscv/include/asm/cacheflush.h       |   8 +
>> > > > > >  arch/riscv/include/asm/errata_list.h      |  28 ++-
>> > > > > >  drivers/soc/renesas/Kconfig               |   6 +
>> > > > > >  drivers/soc/renesas/Makefile              |   2 +
>> > > > > >  drivers/soc/renesas/rzfive/Kconfig        |   6 +
>> > > > > >  drivers/soc/renesas/rzfive/Makefile       |   3 +
>> > > > > >  drivers/soc/renesas/rzfive/ax45mp_cache.c | 256 ++++++++++++++++++++++
>> > > > >
>> > > > > Given this touches arch/riscv/include/asm/, I don't think the
>> > > > > code belongs under drivers/soc/renesas/.
>> > > > >
>> > > > Ok. Do you have any suggestions on where you want me to put this code?
>> > >
>> > > As it plugs into core riscv functionality, I think it should be under
>> > > arch/riscv/.
>> > > if the RISC-V maintainers object to that, another option is
>> > > drivers/soc/andestech/ or (new) drivers/cache/
>> > >
>> > RISC-V maintainers had already made it clear to not to include vendor
>> > specific stuff in the arch/riscv folder, so I'll consider putting this
>> > into drivers/cache/ folder to sync with the bindings.
>> >
>> > Conor/Palmer - do you have any objections/suggestions?
>>
>> I'm not its maintainer so sorta moot what I say, but having drivers in
>> arch/riscv makes little sense to me..
>> Putting stuff in drivers/cache does sound like a good idea since the
>> binding is going there too.
>>
>> The SiFive ccache driver is in drivers/soc and it was suggested to me
>> this week that there's likely going to be a second SiFive cache driver
>> at some point in the near future. Plus Microchip are going to have to
>> add cache management stuff to the existing SiFive ccache driver.
>> Having them be their own thing makes sense in my mind - especially since
>> they're not tied to SoCs sold by Andes or SiFive.
>>
>> I had a quick, and I mean *quick* look through other soc drivers to see
>> if there were any other cache controller drivers but nothing stood out
>> to me. Maybe someone else has more of a clue there. Ditto for misc, had
>> a look but nothing seemed obvious.
>
>Usually they're under arch/:
>$ git ls-files -- "arch/*cache*" | wc -l
>148
>$ git ls-files -- "drivers/*cache*" | wc -l
>63

That's for checking what I could not!
Don't think my roaming data would cover a kernel clone!

>E.g. arch/arm/mm/cache-l2x0.c.

If that's where they usually go, is there a real reason not to do the same here?
Whatever about a limited set of riscv cache drivers, moving all the other ones around to a new directory doesnt seem like a great idea.





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux