Re: Regression: at24 eeprom writing times out on sama5d3

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



+CC Nicolas

On 15/12/2022 17:53, Thorsten Leemhuis wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
> 
> Hi, this is your Linux kernel regression tracker.
> 
> On 08.09.22 15:59, Peter Rosin wrote:
>> Hi!
>>
>> 2022-09-08 at 14:06, Thorsten Leemhuis wrote:
>>> Hi, this is your Linux kernel regression tracker. Top-posting for once,
>>> to make this easily accessible to everyone.
>>>
>>> Peter, Codrin, could you help me out here please: I still have the
>>> regression report from Peter that started this thread in the list of
>>> tracked issues. From Peter's last msg quoted below it seems the thread
>>> just faded out without the regression being fixed. Or was it? If not:
>>> what can we do to finally get this resolved?
>>
>> No, it is not resolved that I know of. We are only writing during
>> production, but are working around it by verifying and looping back.
>> Sometimes it takes surprisingly long for the loop to finish, but
>> it's not a huge deal. But it is of course not completely satisfying
>> either...
>>
>> Reading is never a problem, so post-production behavior is sane.
> 
> I still have this regression that Peter reported in late July on my
> list. :-(
> 
> Codrin (and maybe Wolfram), could you provide a update please? Afaics
> this is the state of things (please correct me if I'm wrong!): In an
> earlier mail
> (https://lore.kernel.org/lkml/38dedc92-62a2-7365-6fda-95d6404be749@xxxxxxxxxx/
> ) of this thread Peter stated that the following patch set Codrin posted
> mid 2021 helped:
> https://lore.kernel.org/all/20210727111554.1338832-1-codrin.ciubotariu@xxxxxxxxxxxxx/

IIRC (and I may well be wrong as it is not my neck of the woods) Codrin is
no longer at Microchip. Nicolas, do you know who has taken over this driver?

Thanks,
Conor.

> 
> There where a few review comments from Wolfram, but looks like then
> things stalled. Can we somehow get this rolling again to finally get
> this regression fixed?
> 
> Ciao, Thorsten (wearing his 'the Linux kernel's regression tracker' hat)
> 
> P.S.: As the Linux kernel's regression tracker I deal with a lot of
> reports and sometimes miss something important when writing mails like
> this. If that's the case here, don't hesitate to tell me in a public
> reply, it's in everyone's interest to set the public record straight.
> 
>>> Ciao, Thorsten (wearing his 'the Linux kernel's regression tracker' hat)
>>>
>>> P.S.: As the Linux kernel's regression tracker I deal with a lot of
>>> reports and sometimes miss something important when writing mails like
>>> this. If that's the case here, don't hesitate to tell me in a public
>>> reply, it's in everyone's interest to set the public record straight.
>>>
>>> On 30.06.22 09:44, Peter Rosin wrote:
>>>> 2022-06-10 at 22:51, Peter Rosin wrote:
>>>>> 2022-06-10 at 09:35, Codrin.Ciubotariu@xxxxxxxxxxxxx wrote:
>>>>>> On 09.06.2022 17:28, Peter Rosin wrote:
>>>>>>>
>>>>>>> I have not actually bisected this issue but reverting the effects of
>>>>>>> patch a4bd8da893a3 ("ARM: dts: at91: sama5d3: add i2c gpio pinctrl")
>>>>>>> makes the problem go away.
>>>>>>>
>>>>>>> I.e. I need something like this in my dts
>>>>>>>
>>>>>>> &i2c2 {
>>>>>>>           status = "okay";
>>>>>>>
>>>>>>>           pinctrl-names = "default";
>>>>>>>           /delete-property/ pinctrl-1;
>>>>>>>           /delete-property/ sda-gpios;
>>>>>>>           /delete-property/ scl-gpios;
>>>>>>>
>>>>>>>           eeprom@50 {
>>>>>>>                   compatible = "st,24c64", "atmel,24c64";
>>>>>>>                   reg = <0x50>;
>>>>>>>                   wp-gpios = <&filter_gpio 7 GPIO_ACTIVE_HIGH>;
>>>>>>>           };
>>>>>>> };
>>>>>>>
>>>>>>> for multi-page eeprom writes to not time out (a page is 32 bytes on this
>>>>>>> eeprom).
>>>>>>>
>>>>>>> For reference, the current defaults for this SoC/I2C-bus, that I modify,
>>>>>>> are:
>>>>>>>
>>>>>>>           pinctrl-names = "default", "gpio";
>>>>>>>           pinctrl-0 = <&pinctrl_i2c2>;
>>>>>>>           pinctrl-1 = <&pinctrl_i2c2_gpio>;
>>>>>>>           sda-gpios = <&pioA 18 GPIO_ACTIVE_HIGH>;
>>>>>>>           scl-gpios = <&pioA 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
>>>>>>>
>>>>>>> I suspect that the underlying reason is that the bus recovery takes
>>>>>>> too long and that the at24 eeprom driver gives up prematurely. I doubt
>>>>>>> that this is chip specific, but I don't know that.
>>>>>>>
>>>>>>> I can work around the issue in user space with by writing in 4 byte
>>>>>>> chunks, like so
>>>>>>>
>>>>>>> dd if=source.file of=/sys/bus/i2c/devices/2-0050/eeprom obs=4
>>>>>>>
>>>>>>> but that is really ugly and gets slow too, about 20 seconds to program
>>>>>>> the full 8kB eeprom. With the above in my dts it takes a second or
>>>>>>> so (a bit more with dynamic debug active).
>>>>>>>
>>>>>>>
>>>>>>> If I run
>>>>>>>
>>>>>>> dd if=source.file of=/sys/bus/i2c/devices/2-0050/eeprom
>>>>>>>
>>>>>>> with a source.file of 8kB and the upstream dts properties in place, I can
>>>>>>> collect the following debug output from at24, i2c-core and i2c-at91:
>>>>>>>
>>>>>>> Jun  9 15:56:34 me20 kernel: i2c i2c-2: at91_xfer: processing 1 messages:
>>>>>>> Jun  9 15:56:34 me20 kernel: at91_i2c f801c000.i2c: transfer: write 34 bytes.
>>>>>>> Jun  9 15:56:34 me20 kernel: at91_i2c f801c000.i2c: transfer complete
>>>>>>> Jun  9 15:56:34 me20 kernel: at24 2-0050: write 32@0 --> 0 (-23170)
>>>>>>> Jun  9 15:56:34 me20 kernel: i2c i2c-2: at91_xfer: processing 1 messages:
>>>>>>> Jun  9 15:56:34 me20 kernel: at91_i2c f801c000.i2c: transfer: write 34 bytes.
>>>>>>> Jun  9 15:56:34 me20 kernel: at91_i2c f801c000.i2c: received nack
>>>>>>> Jun  9 15:56:34 me20 kernel: i2c i2c-2: Trying i2c bus recovery
>>>>>>> Jun  9 15:56:34 me20 kernel: at24 2-0050: write 32@32 --> -121 (-23169)
>>>>>>> Jun  9 15:56:34 me20 kernel: i2c i2c-2: at91_xfer: processing 1 messages:
>>>>>>> Jun  9 15:56:34 me20 kernel: at91_i2c f801c000.i2c: transfer: write 34 bytes.
>>>>>>> Jun  9 15:56:34 me20 kernel: at91_i2c f801c000.i2c: transfer complete
>>>>>>> Jun  9 15:56:34 me20 kernel: at24 2-0050: write 32@32 --> 0 (-23168)
>>>>>>> Jun  9 15:56:34 me20 kernel: i2c i2c-2: at91_xfer: processing 1 messages:
>>>>>>> Jun  9 15:56:34 me20 kernel: at91_i2c f801c000.i2c: transfer: write 34 bytes.
>>>>>>> Jun  9 15:56:34 me20 kernel: at91_i2c f801c000.i2c: received nack
>>>>>>> Jun  9 15:56:34 me20 kernel: i2c i2c-2: Trying i2c bus recovery
>>>>>>> Jun  9 15:56:34 me20 kernel: at24 2-0050: write 32@64 --> -121 (-23168)
>>>>>>> Jun  9 15:56:34 me20 kernel: i2c i2c-2: at91_xfer: processing 1 messages:
>>>>>>> Jun  9 15:56:34 me20 kernel: at91_i2c f801c000.i2c: transfer: write 34 bytes.
>>>>>>> Jun  9 15:56:34 me20 kernel: at91_i2c f801c000.i2c: transfer complete
>>>>>>> Jun  9 15:56:34 me20 kernel: at24 2-0050: write 32@64 --> 0 (-23167)
>>>>>>> Jun  9 15:56:34 me20 kernel: i2c i2c-2: at91_xfer: processing 1 messages:
>>>>>>> Jun  9 15:56:34 me20 kernel: at91_i2c f801c000.i2c: transfer: write 34 bytes.
>>>>>>> Jun  9 15:56:34 me20 kernel: at91_i2c f801c000.i2c: received nack
>>>>>>> Jun  9 15:56:34 me20 kernel: i2c i2c-2: Trying i2c bus recovery
>>>>>>> Jun  9 15:56:34 me20 kernel: at24 2-0050: write 32@96 --> -121 (-23167)
>>>>>>> Jun  9 15:56:34 me20 kernel: i2c i2c-2: at91_xfer: processing 1 messages:
>>>>>>> Jun  9 15:56:34 me20 kernel: at91_i2c f801c000.i2c: transfer: write 34 bytes.
>>>>>>> Jun  9 15:56:34 me20 kernel: at91_i2c f801c000.i2c: controller timed out
>>>>>>> Jun  9 15:56:34 me20 kernel: i2c i2c-2: Trying i2c bus recovery
>>>>>>> Jun  9 15:56:34 me20 kernel: at24 2-0050: write 32@96 --> -110 (-23155)
>>>>>>> Jun  9 15:56:34 me20 kernel: i2c i2c-2: at91_xfer: processing 1 messages:
>>>>>>> Jun  9 15:56:34 me20 kernel: at91_i2c f801c000.i2c: transfer: write 34 bytes.
>>>>>>> Jun  9 15:56:34 me20 kernel: at91_i2c f801c000.i2c: controller timed out
>>>>>>> Jun  9 15:56:34 me20 kernel: i2c i2c-2: Trying i2c bus recovery
>>>>>>> Jun  9 15:56:34 me20 kernel: at24 2-0050: write 32@96 --> -110 (-23143)
>>>>>>>
>>>>>>> And then there is no more action. I.e. only a couple of 32 byte pages
>>>>>>> are written.
>>>>>>>
>>>>>>> With the above mentioned dts override in place I instead get this, which is
>>>>>>> a lot more sensible:
>>>>>>>
>>>>>>> Jun  9 15:48:53 me20 kernel: i2c i2c-2: at91_xfer: processing 1 messages:
>>>>>>> Jun  9 15:48:53 me20 kernel: at91_i2c f801c000.i2c: transfer: write 34 bytes.
>>>>>>> Jun  9 15:48:53 me20 kernel: at91_i2c f801c000.i2c: transfer complete
>>>>>>> Jun  9 15:48:53 me20 kernel: at24 2-0050: write 32@0 --> 0 (753629)
>>>>>>> Jun  9 15:48:53 me20 kernel: i2c i2c-2: at91_xfer: processing 1 messages:
>>>>>>> Jun  9 15:48:53 me20 kernel: at91_i2c f801c000.i2c: transfer: write 34 bytes.
>>>>>>> Jun  9 15:48:53 me20 kernel: at91_i2c f801c000.i2c: received nack
>>>>>>> Jun  9 15:48:53 me20 kernel: at24 2-0050: write 32@32 --> -121 (753629)
>>>>>>> Jun  9 15:48:53 me20 kernel: i2c i2c-2: at91_xfer: processing 1 messages:
>>>>>>> Jun  9 15:48:53 me20 kernel: at91_i2c f801c000.i2c: transfer: write 34 bytes.
>>>>>>> Jun  9 15:48:53 me20 kernel: at91_i2c f801c000.i2c: transfer complete
>>>>>>> Jun  9 15:48:53 me20 kernel: at24 2-0050: write 32@32 --> 0 (753630)
>>>>>>> Jun  9 15:48:53 me20 kernel: i2c i2c-2: at91_xfer: processing 1 messages:
>>>>>>> Jun  9 15:48:53 me20 kernel: at91_i2c f801c000.i2c: transfer: write 34 bytes.
>>>>>>> Jun  9 15:48:53 me20 kernel: at91_i2c f801c000.i2c: received nack
>>>>>>> Jun  9 15:48:53 me20 kernel: at24 2-0050: write 32@64 --> -121 (753630)
>>>>>>> Jun  9 15:48:53 me20 kernel: i2c i2c-2: at91_xfer: processing 1 messages:
>>>>>>> Jun  9 15:48:53 me20 kernel: at91_i2c f801c000.i2c: transfer: write 34 bytes.
>>>>>>> Jun  9 15:48:53 me20 kernel: at91_i2c f801c000.i2c: transfer complete
>>>>>>> Jun  9 15:48:53 me20 kernel: at24 2-0050: write 32@64 --> 0 (753631)
>>>>>>> Jun  9 15:48:53 me20 kernel: i2c i2c-2: at91_xfer: processing 1 messages:
>>>>>>> Jun  9 15:48:53 me20 kernel: at91_i2c f801c000.i2c: transfer: write 34 bytes.
>>>>>>> Jun  9 15:48:53 me20 kernel: at91_i2c f801c000.i2c: received nack
>>>>>>> Jun  9 15:48:53 me20 kernel: at24 2-0050: write 32@96 --> -121 (753631)
>>>>>>> Jun  9 15:48:53 me20 kernel: i2c i2c-2: at91_xfer: processing 1 messages:
>>>>>>> Jun  9 15:48:53 me20 kernel: at91_i2c f801c000.i2c: transfer: write 34 bytes.
>>>>>>> Jun  9 15:48:53 me20 kernel: at91_i2c f801c000.i2c: transfer complete
>>>>>>> Jun  9 15:48:53 me20 kernel: at24 2-0050: write 32@96 --> 0 (753632)
>>>>>>> Jun  9 15:48:53 me20 kernel: i2c i2c-2: at91_xfer: processing 1 messages:
>>>>>>> Jun  9 15:48:53 me20 kernel: at91_i2c f801c000.i2c: transfer: write 34 bytes.
>>>>>>> Jun  9 15:48:53 me20 kernel: at91_i2c f801c000.i2c: received nack
>>>>>>> Jun  9 15:48:53 me20 kernel: at24 2-0050: write 32@128 --> -121 (753632)
>>>>>>> Jun  9 15:48:53 me20 kernel: i2c i2c-2: at91_xfer: processing 1 messages:
>>>>>>> Jun  9 15:48:53 me20 kernel: at91_i2c f801c000.i2c: transfer: write 34 bytes.
>>>>>>> Jun  9 15:48:53 me20 kernel: at91_i2c f801c000.i2c: transfer complete
>>>>>>> Jun  9 15:48:53 me20 kernel: at24 2-0050: write 32@128 --> 0 (753633)
>>>>>>> Jun  9 15:48:53 me20 kernel: i2c i2c-2: at91_xfer: processing 1 messages:
>>>>>>> Jun  9 15:48:53 me20 kernel: at91_i2c f801c000.i2c: transfer: write 34 bytes.
>>>>>>> Jun  9 15:48:53 me20 kernel: at91_i2c f801c000.i2c: received nack
>>>>>>> Jun  9 15:48:53 me20 kernel: at24 2-0050: write 32@160 --> -121 (753633)
>>>>>>> Jun  9 15:48:53 me20 kernel: i2c i2c-2: at91_xfer: processing 1 messages:
>>>>>>> Jun  9 15:48:53 me20 kernel: at91_i2c f801c000.i2c: transfer: write 34 bytes.
>>>>>>> Jun  9 15:48:53 me20 kernel: at91_i2c f801c000.i2c: transfer complete
>>>>>>> Jun  9 15:48:53 me20 kernel: at24 2-0050: write 32@160 --> 0 (753634)
>>>>>>> ... snip ...
>>>>>>> Jun  9 15:48:55 me20 kernel: i2c i2c-2: at91_xfer: processing 1 messages:
>>>>>>> Jun  9 15:48:55 me20 kernel: at91_i2c f801c000.i2c: transfer: write 34 bytes.
>>>>>>> Jun  9 15:48:55 me20 kernel: at91_i2c f801c000.i2c: received nack
>>>>>>> Jun  9 15:48:55 me20 kernel: at24 2-0050: write 32@8128 --> -121 (753883)
>>>>>>> Jun  9 15:48:55 me20 kernel: i2c i2c-2: at91_xfer: processing 1 messages:
>>>>>>> Jun  9 15:48:55 me20 kernel: at91_i2c f801c000.i2c: transfer: write 34 bytes.
>>>>>>> Jun  9 15:48:55 me20 kernel: at91_i2c f801c000.i2c: transfer complete
>>>>>>> Jun  9 15:48:55 me20 kernel: at24 2-0050: write 32@8128 --> 0 (753884)
>>>>>>> Jun  9 15:48:55 me20 kernel: i2c i2c-2: at91_xfer: processing 1 messages:
>>>>>>> Jun  9 15:48:55 me20 kernel: at91_i2c f801c000.i2c: transfer: write 34 bytes.
>>>>>>> Jun  9 15:48:55 me20 kernel: at91_i2c f801c000.i2c: received nack
>>>>>>> Jun  9 15:48:55 me20 kernel: at24 2-0050: write 32@8160 --> -121 (753884)
>>>>>>> Jun  9 15:48:55 me20 kernel: i2c i2c-2: at91_xfer: processing 1 messages:
>>>>>>> Jun  9 15:48:55 me20 kernel: at91_i2c f801c000.i2c: transfer: write 34 bytes.
>>>>>>> Jun  9 15:48:55 me20 kernel: at91_i2c f801c000.i2c: transfer complete
>>>>>>> Jun  9 15:48:55 me20 kernel: at24 2-0050: write 32@8160 --> 0 (753885)
>>>>>>
>>>>>> could you please apply this patch-set [1] and let us know if it
>>>>>> addresses your issue?
>>>>>>
>>>>>> Thanks and best regards,
>>>>>> Codrin
>>>>>>
>>>>>> https://patchwork.ozlabs.org/project/linux-i2c/list/?series=255408
>>>>>
>>>>> That series does indeed help! I'll reply with a tested-by etc on the
>>>>> first two patches, I can't test patch 3/3 with my sama5d3 board...
>>>>>
>>>>> Thank you very much!
>>>>
>>>> Since replying to the actual patches do not work for me, I'm writing here
>>>> instead. Sorry about that. As stated above, it /seems/ to work much better
>>>> with these patches. But I fooled myself and there is still some remaining
>>>> trouble. It is not uncommon that the second (32-byte) page in the eeprom
>>>> is not written correctly for whatever reason. I do not know why it's
>>>> always the second page that gets corrupted, but this is a bad problem since
>>>> the failure is completely silent.
>>>>
>>>> Cheers,
>>>> Peter
>>>
>>> #regzbot poke
>>
>> _______________________________________________
>> linux-arm-kernel mailing list
>> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
> 
> #regzbot poke





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux