... and USB support On 2022-12-15 00:20:43, Marijn Suijten wrote: > Add pinctrl nodes to enable SD Cards to work on the Sony Loire platform, > and define extcon nodes in PMI8950 to feed into the ci-hdrc driver as it > cannot figure out the presence of a USB cable (nor the desired role > based on the ID pin) on its own. While at it, extend PMI8950 with some > more channels with now-available VADC_ register constants. > > Depends on: > - Fix pm8941-misc extcon interrupt dependency assumptions: > https://lore.kernel.org/linux-arm-msm/20220926113143.40768-1-bryan.odonoghue@xxxxxxxxxx/ > - dt-bindings: iio: qcom-spmi-vadc: Add definitions for USB DP/DM VADCs: > https://lore.kernel.org/linux-arm-msm/20221111120156.48040-2-angelogioacchino.delregno@xxxxxxxxxxxxx/ > > Marijn Suijten (6): > arm64: dts: qcom: pmi8950: Add USB vbus and id sensing nodes > arm64: dts: qcom: msm8956-loire: Add usb vbus and id extcons to > ci-hdrc > arm64: dts: qcom: pmi8950: Add missing ADC channels > arm64: dts: qcom: msm8976: Declare and use SDC1 pins > arm64: dts: qcom: msm8976: Declare and use SDC2 pins > arm64: dts: qcom: msm8956-loire: Add SD Card Detect to SDC2 pin states > > .../qcom/msm8956-sony-xperia-loire-kugo.dts | 6 ++ > .../dts/qcom/msm8956-sony-xperia-loire.dtsi | 25 +++++ > arch/arm64/boot/dts/qcom/msm8976.dtsi | 100 ++++++++++++++++++ > arch/arm64/boot/dts/qcom/pmi8950.dtsi | 38 +++++++ > 4 files changed, 169 insertions(+) > > -- > 2.39.0 >
