These seem to have previously been excluded due to either not residing
on the test board, and/or lacking VADC_USB_DP/VADC_USB_DM definitions.
Now that the channel constants are included in dt-bindings, add the
channels to DT as well.
Signed-off-by: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/pmi8950.dtsi | 24 ++++++++++++++++++++++++
1 file changed, 24 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/pmi8950.dtsi b/arch/arm64/boot/dts/qcom/pmi8950.dtsi
index 7a857b2f3a5a..42a867685275 100644
--- a/arch/arm64/boot/dts/qcom/pmi8950.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmi8950.dtsi
@@ -69,6 +69,30 @@ adc-chan@d {
qcom,pre-scaling = <1 1>;
label = "chg_temp";
};
+
+ adc-chan@e {
+ reg = <VADC_GND_REF>;
+ qcom,pre-scaling = <1 1>;
+ label = "ref_gnd";
+ };
+
+ adc-chan@f {
+ reg = <VADC_VDD_VADC>;
+ qcom,pre-scaling = <1 1>;
+ label = "ref_vdd";
+ };
+
+ adc-chan@43 {
+ reg = <VADC_USB_DP>;
+ qcom,pre-scaling = <1 1>;
+ label = "usb_dp";
+ };
+
+ adc-chan@44 {
+ reg = <VADC_USB_DM>;
+ qcom,pre-scaling = <1 1>;
+ label = "usb_dm";
+ };
};
pmi8950_mpps: mpps@a000 {
--
2.39.0
