From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx> In case of using MIXer with Simple Audio Card, it needs below DT. simple-audio-card,dai-link@1 { cpu@0 { ... }; cpu@1 { ... }; ... }; This case, it requires "reg = <xxx>" which needs #address-cells/#size-cells, but simple-audio-card.yaml is missing these. This patch adds it. Without this patch, we will get below warning. ${LINUX}/arch/arm64/boot/dts/renesas/r8a77950-ulcb.dtb: sound: simple-audio-card,dai-link@0: '#address-cells', '#size-cells' do not match any of the regexes: '^codec(@[0-9a-f]+)?', '^cpu(@[0-9a-f]+)?', 'pinctrl-[0-9]+' From schema: ${LINUX}/Documentation/devicetree/bindings/sound/simple-card.yaml Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx> --- Documentation/devicetree/bindings/sound/simple-card.yaml | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/Documentation/devicetree/bindings/sound/simple-card.yaml b/Documentation/devicetree/bindings/sound/simple-card.yaml index ed19899bc94b..a3d06e96205e 100644 --- a/Documentation/devicetree/bindings/sound/simple-card.yaml +++ b/Documentation/devicetree/bindings/sound/simple-card.yaml @@ -215,6 +215,10 @@ patternProperties: reg: maxItems: 1 + "#address-cells": + const: 1 + "#size-cells": + const: 0 # common properties frame-master: $ref: "#/definitions/frame-master" -- 2.25.1