This adds minimal support for the MediaTek 8365 SOC and the EVK reference
board, allowing the board to boot to initramfs with serial port I/O.
v5:
- Reorder top-level entries in mediatek,mt8365-pinctrl.yaml to match
example-schema
- Use consistent quotes
v4:
- Remove pins-are-numbered references that have been holding things up
now that the patches removing it from dt-bindings have landed in linux-next
v3:
- Remove a number of components that are not yet supported (they will
come back alongside the corresponding drivers)
- Address issues found by dt_binding_check (mostly fixing pinctrl
bindings)
- Address issues pointed out in comments
- Reorder patches
v2:
- Add missing dt-bindings documentation
- Small cleanups addressing issues in v1 pointed out by Krzysztof Kozlowski
Bernhard Rosenkränzer (4):
dt-bindings: arm64: dts: mediatek: Add mt8365-evk board
dt-bindings: irq: mtk, sysirq: add support for mt8365
dt-bindings: mfd: syscon: Add mt8365-syscfg
dt-bindings: pinctrl: add bindings for Mediatek MT8365 SoC
Fabien Parent (3):
dt-bindings: usb: mediatek,mtu3: add MT8365 SoC bindings
dt-bindings: usb: mediatek,mtk-xhci: add MT8365 SoC bindings
arm64: dts: mediatek: Initial mt8365-evk support
.../devicetree/bindings/arm/mediatek.yaml | 4 +
.../interrupt-controller/mediatek,sysirq.txt | 1 +
.../devicetree/bindings/mfd/syscon.yaml | 1 +
.../pinctrl/mediatek,mt8365-pinctrl.yaml | 197 ++++++++++
.../bindings/usb/mediatek,mtk-xhci.yaml | 1 +
.../bindings/usb/mediatek,mtu3.yaml | 1 +
arch/arm64/boot/dts/mediatek/Makefile | 1 +
arch/arm64/boot/dts/mediatek/mt8365-evk.dts | 163 +++++++++
arch/arm64/boot/dts/mediatek/mt8365.dtsi | 343 ++++++++++++++++++
9 files changed, 712 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/mediatek,mt8365-pinctrl.yaml
create mode 100644 arch/arm64/boot/dts/mediatek/mt8365-evk.dts
create mode 100644 arch/arm64/boot/dts/mediatek/mt8365.dtsi
--
2.39.0
