Sony ever so graciously provides GPIO line names in their downstream
kernel (though sometimes they are not 100% accurate and you can judge
that by simply looking at them and with what drivers they are used).
Add these to the PDX223&224 DTSIs to better document the hardware.
Diff between 223 and 224:
pm8350b
< "CAM_PWR_LD_EN",
> "NC",
pm8350c
< "RGBC_IR_PWR_EN",
> "NC",
Which is due to different camera power wiring on 223 and lack of a
ToF sensor on 224.
Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
---
.../qcom/sm8450-sony-xperia-nagara-pdx223.dts | 23 ++++++++++++++++
.../qcom/sm8450-sony-xperia-nagara-pdx224.dts | 23 ++++++++++++++++
.../dts/qcom/sm8450-sony-xperia-nagara.dtsi | 27 +++++++++++++++++++
3 files changed, 73 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara-pdx223.dts b/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara-pdx223.dts
index b83500316a81..561cd4f09ab7 100644
--- a/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara-pdx223.dts
+++ b/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara-pdx223.dts
@@ -13,6 +13,29 @@ / {
compatible = "sony,pdx223", "qcom,sm8450";
};
+&pm8350b_gpios {
+ gpio-line-names = "CAM_PWR_A_CS", /* GPIO_1 */
+ "NC",
+ "NC",
+ "NC",
+ "SNAPSHOT_N",
+ "CAM_PWR_LD_EN",
+ "NC",
+ "FOCUS_N";
+};
+
+&pm8350c_gpios {
+ gpio-line-names = "FL_STROBE_TRIG_WIDE", /* GPIO_1 */
+ "FL_STROBE_TRIG_TELE",
+ "WLC_ID",
+ "WLC_TXPWR_EN",
+ "NC",
+ "RGBC_IR_PWR_EN",
+ "NC",
+ "NC",
+ "WIDEC_PWR_EN";
+};
+
&tlmm {
gpio-line-names = "NC", /* GPIO_0 */
"NC",
diff --git a/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara-pdx224.dts b/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara-pdx224.dts
index 13c2fc4bccfc..fc9d74d0f227 100644
--- a/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara-pdx224.dts
+++ b/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara-pdx224.dts
@@ -20,6 +20,29 @@ imx563_vdig_vreg: imx563-vdig-regulator {
};
};
+&pm8350b_gpios {
+ gpio-line-names = "CAM_PWR_A_CS", /* GPIO_1 */
+ "NC",
+ "NC",
+ "NC",
+ "SNAPSHOT_N",
+ "NC",
+ "NC",
+ "FOCUS_N";
+};
+
+&pm8350c_gpios {
+ gpio-line-names = "FL_STROBE_TRIG_WIDE", /* GPIO_1 */
+ "FL_STROBE_TRIG_TELE",
+ "WLC_ID",
+ "WLC_TXPWR_EN",
+ "NC",
+ "NC", /* RGBCIR uses a PMIC vreg, so it's most likely NC. */
+ "NC",
+ "NC",
+ "WIDEC_PWR_EN";
+};
+
&tlmm {
gpio-line-names = "TELE_SPI_MISO", /* GPIO_0 */
"TELE_SPI_MOSI", /* SONY says NC, but it only makes sense this way.. */
diff --git a/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara.dtsi b/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara.dtsi
index e29fb7adc780..8e128efcb128 100644
--- a/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara.dtsi
@@ -551,6 +551,33 @@ &pcie0_phy {
status = "okay";
};
+&pm8350_gpios {
+ gpio-line-names = "ASSIGN1_THERM", /* GPIO_1 */
+ "LCD_ID",
+ "SDR_MMW_THERM",
+ "RF_ID",
+ "NC",
+ "VOL_DOWN_N",
+ "NC",
+ "NC",
+ "NC",
+ "PM8350_OPTION"; /* GPIO_10 */
+};
+
+&pm8450_gpios {
+ gpio-line-names = "FP_LDO_EN", /* GPIO_1 */
+ "",
+ "",
+ "";
+};
+
+&pmk8350_gpios {
+ gpio-line-names = "NC", /* GPIO_1 */
+ "NC",
+ "DISP_THERM",
+ "PMK8350_OPTION";
+};
+
&remoteproc_adsp {
firmware-name = "qcom/sm8350/Sony/nagara/adsp.mbn";
status = "okay";
--
2.39.0
