Re: [PATCH 06/12] dt-bindings: watchdog: qcom-wdt: merge MSM timer

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Dec 12, 2022 at 05:35:26PM +0100, Krzysztof Kozlowski wrote:
> Merge Qualcomm MSM timer bindings into watchdog, because the timer
> compatibles are already included here and the hardware is quite similar.
> 
> While converting the MSM timer bindings, adjust clock-frequency
> property to take only one frequency, instead of two, because:
> 1. DT schema does not allow to frequencies,
> 2. The Linux timer driver reads only first frequency.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
> ---
>  .../bindings/timer/qcom,msm-timer.txt         | 47 ------------------
>  .../bindings/watchdog/qcom-wdt.yaml           | 49 +++++++++++++++++++
>  2 files changed, 49 insertions(+), 47 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/timer/qcom,msm-timer.txt
> 
> diff --git a/Documentation/devicetree/bindings/timer/qcom,msm-timer.txt b/Documentation/devicetree/bindings/timer/qcom,msm-timer.txt
> deleted file mode 100644
> index 5e10c345548f..000000000000
> --- a/Documentation/devicetree/bindings/timer/qcom,msm-timer.txt
> +++ /dev/null
> @@ -1,47 +0,0 @@
> -* MSM Timer
> -
> -Properties:
> -
> -- compatible : Should at least contain "qcom,msm-timer". More specific
> -               properties specify which subsystem the timers are paired with.
> -
> -               "qcom,kpss-timer" - krait subsystem
> -               "qcom,scss-timer" - scorpion subsystem
> -
> -- interrupts : Interrupts for the debug timer, the first general purpose
> -               timer, and optionally a second general purpose timer, and
> -               optionally as well, 2 watchdog interrupts, in that order.
> -
> -- reg : Specifies the base address of the timer registers.
> -
> -- clocks: Reference to the parent clocks, one per output clock. The parents
> -          must appear in the same order as the clock names.
> -
> -- clock-names: The name of the clocks as free-form strings. They should be in
> -               the same order as the clocks.
> -
> -- clock-frequency : The frequency of the debug timer and the general purpose
> -                    timer(s) in Hz in that order.
> -
> -Optional:
> -
> -- cpu-offset : per-cpu offset used when the timer is accessed without the
> -               CPU remapping facilities. The offset is
> -               cpu-offset + (0x10000 * cpu-nr).
> -
> -Example:
> -
> -       timer@200a000 {
> -               compatible = "qcom,scss-timer", "qcom,msm-timer";
> -               interrupts = <1 1 0x301>,
> -                            <1 2 0x301>,
> -                            <1 3 0x301>,
> -                            <1 4 0x301>,
> -                            <1 5 0x301>;
> -               reg = <0x0200a000 0x100>;
> -               clock-frequency = <19200000>,
> -                                 <32768>;
> -               clocks = <&sleep_clk>;
> -               clock-names = "sleep";
> -               cpu-offset = <0x40000>;
> -       };
> diff --git a/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml b/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml
> index b7fc57f4800e..697caf1937cc 100644
> --- a/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml
> +++ b/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml
> @@ -10,6 +10,9 @@ maintainers:
>    - Sai Prakash Ranjan <saiprakash.ranjan@xxxxxxxxxxxxxx>
>  
>  properties:
> +  $nodename:
> +    pattern: "^(watchdog|timer)@[0-9a-f]+$"
> +
>    compatible:
>      oneOf:
>        - items:
> @@ -48,6 +51,20 @@ properties:
>    clocks:
>      maxItems: 1
>  
> +  clock-names:
> +    items:
> +      - const: sleep
> +
> +  clock-frequency:
> +    description:
> +      The frequency of the general purpose timer in Hz in that order.

'in that order'?

> +
> +  cpu-offset:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description:
> +      Per-CPU offset used when the timer is accessed without the CPU remapping
> +      facilities. The offset is cpu-offset + (0x10000 * cpu-nr).
> +
>    interrupts:
>      minItems: 1
>      maxItems: 5
> @@ -67,12 +84,27 @@ allOf:
>              const: qcom,kpss-wdt
>      then:
>        properties:
> +        clock-frequency: false
> +        cpu-offset: false
>          interrupts:
>            minItems: 1
>            items:
>              - description: Bark
>              - description: Bite
>  
> +    else:
> +      properties:
> +        interrupts:
> +          minItems: 3
> +          items:
> +            - description: Debug
> +            - description: First general purpose timer
> +            - description: Second general purpose timer
> +            - description: First watchdog
> +            - description: Second watchdog

Okay, here they are. No need to set it to 2 then change to 5 in the 
series.

> +      required:
> +        - clock-frequency
> +
>  unevaluatedProperties: false
>  
>  examples:
> @@ -86,3 +118,20 @@ examples:
>        interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
>        timeout-sec = <10>;
>      };
> +
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +    watchdog@200a000 {
> +      compatible = "qcom,kpss-wdt-ipq8064", "qcom,kpss-timer", "qcom,msm-timer";
> +      interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>,
> +                   <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>,
> +                   <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>,
> +                   <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>,
> +                   <GIC_PPI 5 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>;
> +      reg = <0x0200a000 0x100>;
> +      clock-frequency = <25000000>;
> +      clocks = <&sleep_clk>;
> +      clock-names = "sleep";
> +      cpu-offset = <0x80000>;
> +    };
> -- 
> 2.34.1
> 
> 



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux