Re: [PATCH 3/3] arm64: dts: qcom: sm6115: Add USB SS qmp phy node

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 13.12.2022 13:38, Bhupesh Sharma wrote:
> Add USB superspeed qmp phy node to dtsi.
> 
> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
> ---
Please run make dtbs_check before sending dt patches, this one
introduces new errors.


>  arch/arm64/boot/dts/qcom/sm6115.dtsi | 38 ++++++++++++++++++++++++++--
>  1 file changed, 36 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
> index e4ce135264f3d..9c5c024919f92 100644
> --- a/arch/arm64/boot/dts/qcom/sm6115.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
> @@ -579,6 +579,40 @@ usb_hsphy: phy@1613000 {
>  			status = "disabled";
>  		};
>  
> +		usb_qmpphy: phy@1615000 {
> +			compatible = "qcom,sm6115-qmp-usb3-phy";
> +			reg = <0x01615000 0x200>;
> +			#clock-cells = <1>;
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			ranges;
These -cells and ranges properties could go after status=disabled

Konrad
> +			clocks = <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
> +				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
> +				 <&gcc GCC_AHB2PHY_USB_CLK>;
> +			clock-names = "com_aux",
> +				      "ref",
> +				      "cfg_ahb";
> +			resets = <&gcc GCC_USB3_PHY_PRIM_SP0_BCR>,
> +				 <&gcc GCC_USB3PHY_PHY_PRIM_SP0_BCR>;
> +			reset-names = "phy", "phy_phy";
> +			status = "disabled";
> +
> +			usb_ssphy: phy@1615200 {
> +				reg = <0x01615200 0x200>,
> +				      <0x01615400 0x200>,
> +				      <0x01615c00 0x400>,
> +				      <0x01615600 0x200>,
> +				      <0x01615800 0x200>,
> +				      <0x01615a00 0x100>;
> +				#phy-cells = <0>;
> +				#clock-cells = <1>;
> +				clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
> +				clock-names = "pipe0";
> +				clock-output-names = "usb3_phy_pipe_clk_src";
> +			};
> +		};
> +
> +
>  		qfprom@1b40000 {
>  			compatible = "qcom,sm6115-qfprom", "qcom,qfprom";
>  			reg = <0x01b40000 0x7000>;
> @@ -1023,8 +1057,8 @@ usb_dwc3: usb@4e00000 {
>  				compatible = "snps,dwc3";
>  				reg = <0x04e00000 0xcd00>;
>  				interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
> -				phys = <&usb_hsphy>;
> -				phy-names = "usb2-phy";
> +				phys = <&usb_hsphy>, <&usb_ssphy>;
> +				phy-names = "usb2-phy", "usb3-phy";
>  				iommus = <&apps_smmu 0x120 0x0>;
>  				snps,dis_u2_susphy_quirk;
>  				snps,dis_enblslpm_quirk;



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux