Il 01/12/22 11:33, Chen-Yu Tsai ha scritto:
On Thu, Dec 1, 2022 at 5:31 PM AngeloGioacchino Del Regno
<angelogioacchino.delregno@xxxxxxxxxxxxx> wrote:
Il 01/12/22 09:42, Chen-Yu Tsai ha scritto:
The systimer block derives its 13 MHz clock by dividing the main 26 MHz
oscillator clock by 2 internally, not through the TOPCKGEN clock
controller.
On the MT8183 this divider is set either by power-on-reset or by the
bootloader. The bootloader may then make the divider unconfigurable to,
but can be read out by, the operating system.
Making the systimer block take the 26 MHz clock directly requires
changing the implementations. As an ABI compatible fix, change the
input clock of the systimer block a fixed factor divide-by-2 clock
that takes the 26 MHz oscillator as its input.
Fixes: 5bc8e2875ffb ("arm64: dts: mt8183: add systimer0 device node")
Signed-off-by: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
I generally not just like - but *love* - this change, I had that in my mind
for a couple of months now and forgot about it because reasons.
There's just one thing that, since we're doing this now, we can clarify (and
that's important to avoid questions like "why isn't this board-specific"):
the 26MHz clock "clk26m" oscillator that we're using for the system timers
is a SoC-provided clock, and its name is "SYSCLK" as in "System bus clock".
Looking at the schematics it is terribly more complicated. :(
The crystal feeds the DCXO in the PMIC, which also acts as a buffer.
The PMIC then feeds the SoC and any other chips, such as a modem.
On other platforms we describe the oscillator at the dtsi level as well.
The reason why it isn't board-specific is that the requirements and
properties of the crystal are specified in the platform's datasheet,
i.e. it is a design requirement that every board use the same crystal.
I don't see the datasheet spelling out SYSCLK though. The TOPCKGEN part
I think I got confused with the MCU Debug System (DEM) part. :\
mostly just refers to it as CLK26M, or some variant of it, which likely
denotes some fan-out branch. The system timer part also just says "26M"
or "26 MHz clock source".
Also, we can't change the clock name, as "clk26m" is hard-coded into
the clk drivers.
I wasn't proposing to change the clock-output-names, but nevermind anyway,
on an afterthought, it's probably a good idea to just go with clk26m,
regardless of whether I'm wrong or right about sysclk, as the first one is
the name that we can also find in many (all?) downstream code for other
SoC models.
I know that your target is to describe how we get from 26M to 13M, but at
this point it may be worth it to use the right names to help preventing
confusion about that clock not being an external crystal on the board but
something internal to the SoC.
But as I described above, it is an actual crystal on the board. We are
simply omitting parts of the signal path. Notably the PMIC needs to be
excluded due to circular dependency reasons. And also we most definitely
don't want the system to be touching it.
Let's go with this one.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
