On 12 December 2022 13:23:50 GMT+03:00, Konrad Dybcio <konrad.dybcio@xxxxxxxxxx> wrote:
>
>
>On 12.12.2022 11:18, Dmitry Baryshkov wrote:
>>
>>
>> On 12 December 2022 12:33:13 GMT+03:00, Konrad Dybcio <konrad.dybcio@xxxxxxxxxx> wrote:
>>> Years after the SoC support has been added, it's high time for it to
>>> get dispcc going. Add the node to ensure that.
>>>
>>> Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
>>> ---
>>> arch/arm64/boot/dts/qcom/sm8150.dtsi | 26 ++++++++++++++++++++++++++
>>> 1 file changed, 26 insertions(+)
>>>
>>> diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
>>> index a0c57fb798d3..ff04397777f4 100644
>>> --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
>>> +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
>>> @@ -3579,6 +3579,32 @@ camnoc_virt: interconnect@ac00000 {
>>> qcom,bcm-voters = <&apps_bcm_voter>;
>>> };
>>>
>>> + dispcc: clock-controller@af00000 {
>>> + compatible = "qcom,sm8150-dispcc";
>>> + reg = <0 0x0af00000 0 0x10000>;
>>> + clocks = <&rpmhcc RPMH_CXO_CLK>,
>>> + <0>,
>>> + <0>,
>>> + <0>,
>>> + <0>,
>>> + <0>,
>>> + <0>;
>>> + clock-names = "bi_tcxo",
>>> + "dsi0_phy_pll_out_byteclk",
>>> + "dsi0_phy_pll_out_dsiclk",
>>> + "dsi1_phy_pll_out_byteclk",
>>> + "dsi1_phy_pll_out_dsiclk",
>>> + "dp_phy_pll_link_clk",
>>> + "dp_phy_pll_vco_div_clk";
>>> + #clock-cells = <1>;
>>> + #reset-cells = <1>;
>>> + #power-domain-cells = <1>;
>>> +
>>> + power-domains = <&rpmhpd SM8150_MMCX>;
>>> + /* TODO: Maybe rpmhpd_opp_min_svs could work as well? */
>>> + required-opps = <&rpmhpd_opp_low_svs>;
>>
>> Is it required for the dispcc, for the DSI or for the dpu? We have stumbled upon the similar issue when working on the 8350, see the latest Robert's patchset.
>While I don't have any hard evidence, it seems like it is required for
>any "interesting" multimedia components, AFAIU even including video and
>camera clocks..
>
>Seems like it's a deep down dependency for a lot of things on this
>particular SoC (and likely also on newer ones, remember the initial
>mess with 8250 mmcx?)
Yes. I was questioning the opp level rather than the domain itself. Usually the least possible mmcx level is enough to get dispcc going. Then the consumers (via the PLLs) bump this requirement.
In this particular case the vendor dtsi (sm8150-regulator.dtsi) declares that the minimum level for mmcx is low_svs. So, I think, you can drop the todo completely.
>
>Konrad
>>
>>
>>> + };
>>> +
>>> pdc: interrupt-controller@b220000 {
>>> compatible = "qcom,sm8150-pdc", "qcom,pdc";
>>> reg = <0 0x0b220000 0 0x400>;
>>
--
With best wishes
Dmitry
