The gpio node in PMIC dts'es define access to multiple GPIOs. Most Qcom PMICs were already using the plural _gpios label to point to this node, but a few PMICs were left behind including the recently-pulled pm(i)8950. Rename it from *_gpio to *_gpios for pm6125, pm6150(l), pm8005, pm(i)8950, and pm(i)8998. Signed-off-by: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx> --- This was brought up for discussion in [1] but hasn't seen any relevant reply, unfortunately. [1]: https://lore.kernel.org/linux-arm-msm/20221104234435.xwjpwfxs73puvfca@xxxxxxxxxxxxxx/ --- arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts | 8 ++++---- .../dts/qcom/msm8998-oneplus-cheeseburger.dts | 4 ++-- .../boot/dts/qcom/msm8998-oneplus-common.dtsi | 6 +++--- .../qcom/msm8998-sony-xperia-yoshino-maple.dts | 4 ++-- .../dts/qcom/msm8998-sony-xperia-yoshino.dtsi | 16 ++++++++-------- .../arm64/boot/dts/qcom/msm8998-xiaomi-sagit.dts | 4 ++-- arch/arm64/boot/dts/qcom/pm6125.dtsi | 4 ++-- arch/arm64/boot/dts/qcom/pm6150.dtsi | 4 ++-- arch/arm64/boot/dts/qcom/pm6150l.dtsi | 4 ++-- arch/arm64/boot/dts/qcom/pm8005.dtsi | 4 ++-- arch/arm64/boot/dts/qcom/pm8950.dtsi | 4 ++-- arch/arm64/boot/dts/qcom/pm8998.dtsi | 4 ++-- arch/arm64/boot/dts/qcom/pmi8950.dtsi | 4 ++-- arch/arm64/boot/dts/qcom/pmi8998.dtsi | 4 ++-- arch/arm64/boot/dts/qcom/sc7180-idp.dts | 4 ++-- arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi | 4 ++-- arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi | 4 ++-- arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 16 ++++++++-------- arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi | 4 ++-- .../boot/dts/qcom/sdm845-oneplus-common.dtsi | 6 +++--- .../arm64/boot/dts/qcom/sdm845-shift-axolotl.dts | 4 ++-- .../boot/dts/qcom/sdm845-sony-xperia-tama.dtsi | 2 +- .../dts/qcom/sdm845-xiaomi-beryllium-common.dtsi | 4 ++-- .../boot/dts/qcom/sdm845-xiaomi-polaris.dts | 4 ++-- .../dts/qcom/sm6125-sony-xperia-seine-pdx201.dts | 2 +- 25 files changed, 64 insertions(+), 64 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts b/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts index 310f7a2df1e8..0e273938b59d 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts +++ b/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts @@ -113,7 +113,7 @@ gpio-keys { <&cam_snapshot_pin_a>; button-vol-up { label = "Volume Up"; - gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>; + gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>; linux,input-type = <EV_KEY>; linux,code = <KEY_VOLUMEUP>; gpio-key,wakeup; @@ -122,7 +122,7 @@ button-vol-up { button-camera-snapshot { label = "Camera Snapshot"; - gpios = <&pm8998_gpio 7 GPIO_ACTIVE_LOW>; + gpios = <&pm8998_gpios 7 GPIO_ACTIVE_LOW>; linux,input-type = <EV_KEY>; linux,code = <KEY_CAMERA>; debounce-interval = <15>; @@ -130,7 +130,7 @@ button-camera-snapshot { button-camera-focus { label = "Camera Focus"; - gpios = <&pm8998_gpio 8 GPIO_ACTIVE_LOW>; + gpios = <&pm8998_gpios 8 GPIO_ACTIVE_LOW>; linux,input-type = <EV_KEY>; linux,code = <KEY_CAMERA_FOCUS>; debounce-interval = <15>; @@ -338,7 +338,7 @@ pm8005_s1: s1 { /* VDD_GFX supply */ }; }; -&pm8998_gpio { +&pm8998_gpios { vol_up_pin_a: vol-up-active-state { pins = "gpio6"; function = "normal"; diff --git a/arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dts b/arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dts index 9fb1fb9b8529..d36b36af49d0 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dts +++ b/arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dts @@ -23,7 +23,7 @@ leds { pinctrl-0 = <&button_backlight_default>; led-keypad-backlight { - gpios = <&pmi8998_gpio 5 GPIO_ACTIVE_HIGH>; + gpios = <&pmi8998_gpios 5 GPIO_ACTIVE_HIGH>; color = <LED_COLOR_ID_WHITE>; function = LED_FUNCTION_KBD_BACKLIGHT; default-state = "off"; @@ -31,7 +31,7 @@ led-keypad-backlight { }; }; -&pmi8998_gpio { +&pmi8998_gpios { button_backlight_default: button-backlight-state { pins = "gpio5"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi index 7d4a67d07501..ce03c7c239e5 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi @@ -92,7 +92,7 @@ gpio-keys { button-vol-down { label = "Volume down"; - gpios = <&pm8998_gpio 5 GPIO_ACTIVE_LOW>; + gpios = <&pm8998_gpios 5 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEDOWN>; debounce-interval = <15>; wakeup-source; @@ -100,7 +100,7 @@ button-vol-down { button-vol-up { label = "Volume up"; - gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>; + gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; debounce-interval = <15>; wakeup-source; @@ -269,7 +269,7 @@ pm8005_s1: s1 { }; }; -&pm8998_gpio { +&pm8998_gpios { vol_keys_default: vol-keys-state { pins = "gpio5", "gpio6"; function = "normal"; diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-maple.dts b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-maple.dts index 20fe0394a3c1..1868ad649415 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-maple.dts +++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-maple.dts @@ -20,7 +20,7 @@ disp_dvdd_vreg: disp-dvdd-vreg { regulator-max-microvolt = <1350000>; startup-delay-us = <0>; enable-active-high; - gpio = <&pmi8998_gpio 10 GPIO_ACTIVE_HIGH>; + gpio = <&pmi8998_gpios 10 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&disp_dvdd_en>; }; @@ -37,7 +37,7 @@ &lab { qcom,soft-start-us = <200>; }; -&pmi8998_gpio { +&pmi8998_gpios { disp_dvdd_en: disp-dvdd-en-active-state { pins = "gpio10"; function = "normal"; diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi index 5da87baa2b23..1f64b70260fe 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi @@ -25,7 +25,7 @@ div1_mclk: divclk1 { pinctrl-names = "default"; clocks = <&rpmcc RPM_SMD_DIV_CLK1>; #clock-cells = <0>; - enable-gpios = <&pm8998_gpio 13 GPIO_ACTIVE_HIGH>; + enable-gpios = <&pm8998_gpios 13 GPIO_ACTIVE_HIGH>; }; }; @@ -65,7 +65,7 @@ cam_vio_vreg: cam-vio-vreg { regulator-name = "cam_vio_vreg"; startup-delay-us = <0>; enable-active-high; - gpio = <&pmi8998_gpio 1 GPIO_ACTIVE_HIGH>; + gpio = <&pmi8998_gpios 1 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&cam_vio_default>; vin-supply = <&vreg_lvs1a_1p8>; @@ -103,7 +103,7 @@ gpio-keys { <&cam_snapshot_pin_a>; button-vol-down { label = "Volume Down"; - gpios = <&pm8998_gpio 5 GPIO_ACTIVE_LOW>; + gpios = <&pm8998_gpios 5 GPIO_ACTIVE_LOW>; linux,input-type = <EV_KEY>; linux,code = <KEY_VOLUMEDOWN>; gpio-key,wakeup; @@ -112,7 +112,7 @@ button-vol-down { button-camera-snapshot { label = "Camera Snapshot"; - gpios = <&pm8998_gpio 7 GPIO_ACTIVE_LOW>; + gpios = <&pm8998_gpios 7 GPIO_ACTIVE_LOW>; linux,input-type = <EV_KEY>; linux,code = <KEY_CAMERA>; debounce-interval = <15>; @@ -120,7 +120,7 @@ button-camera-snapshot { button-camera-focus { label = "Camera Focus"; - gpios = <&pm8998_gpio 8 GPIO_ACTIVE_LOW>; + gpios = <&pm8998_gpios 8 GPIO_ACTIVE_LOW>; linux,input-type = <EV_KEY>; linux,code = <KEY_CAMERA_FOCUS>; debounce-interval = <15>; @@ -187,7 +187,7 @@ ramoops@ffc00000 { vibrator { compatible = "gpio-vibrator"; - enable-gpios = <&pmi8998_gpio 5 GPIO_ACTIVE_HIGH>; + enable-gpios = <&pmi8998_gpios 5 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&vib_default>; }; @@ -303,7 +303,7 @@ pm8005_s1: s1 { }; }; -&pm8998_gpio { +&pm8998_gpios { vol_down_pin_a: vol-down-active-state { pins = "gpio5"; function = PMIC_GPIO_FUNC_NORMAL; @@ -335,7 +335,7 @@ audio_mclk_pin: audio-mclk-pin-active-state { }; }; -&pmi8998_gpio { +&pmi8998_gpios { cam_vio_default: cam-vio-active-state { pins = "gpio1"; function = PMIC_GPIO_FUNC_NORMAL; diff --git a/arch/arm64/boot/dts/qcom/msm8998-xiaomi-sagit.dts b/arch/arm64/boot/dts/qcom/msm8998-xiaomi-sagit.dts index b1aac7311ef9..7956b151c7a4 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-xiaomi-sagit.dts +++ b/arch/arm64/boot/dts/qcom/msm8998-xiaomi-sagit.dts @@ -133,7 +133,7 @@ gpio-keys { key-vol-up { label = "Volume up"; - gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>; + gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; debounce-interval = <15>; wakeup-source; @@ -278,7 +278,7 @@ pm8005_s1: s1 { /* VDD_GFX supply */ }; }; -&pm8998_gpio { +&pm8998_gpios { vol_up_key_default: vol-up-key-default-state { pins = "gpio6"; function = "normal"; diff --git a/arch/arm64/boot/dts/qcom/pm6125.dtsi b/arch/arm64/boot/dts/qcom/pm6125.dtsi index 1c8ccda26ffb..59092a551a16 100644 --- a/arch/arm64/boot/dts/qcom/pm6125.dtsi +++ b/arch/arm64/boot/dts/qcom/pm6125.dtsi @@ -136,11 +136,11 @@ pm6125_rtc: rtc@6000 { status = "disabled"; }; - pm6125_gpio: gpio@c000 { + pm6125_gpios: gpio@c000 { compatible = "qcom,pm6125-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; - gpio-ranges = <&pm6125_gpio 0 0 9>; + gpio-ranges = <&pm6125_gpios 0 0 9>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; diff --git a/arch/arm64/boot/dts/qcom/pm6150.dtsi b/arch/arm64/boot/dts/qcom/pm6150.dtsi index 3d91fb405ca2..2e6afa296141 100644 --- a/arch/arm64/boot/dts/qcom/pm6150.dtsi +++ b/arch/arm64/boot/dts/qcom/pm6150.dtsi @@ -88,11 +88,11 @@ pm6150_adc_tm: adc-tm@3500 { status = "disabled"; }; - pm6150_gpio: gpio@c000 { + pm6150_gpios: gpio@c000 { compatible = "qcom,pm6150-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; - gpio-ranges = <&pm6150_gpio 0 0 10>; + gpio-ranges = <&pm6150_gpios 0 0 10>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; diff --git a/arch/arm64/boot/dts/qcom/pm6150l.dtsi b/arch/arm64/boot/dts/qcom/pm6150l.dtsi index 90aac61ad264..2479625ed08a 100644 --- a/arch/arm64/boot/dts/qcom/pm6150l.dtsi +++ b/arch/arm64/boot/dts/qcom/pm6150l.dtsi @@ -95,11 +95,11 @@ pm6150l_adc_tm: adc-tm@3500 { status = "disabled"; }; - pm6150l_gpio: gpio@c000 { + pm6150l_gpios: gpio@c000 { compatible = "qcom,pm6150l-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; - gpio-ranges = <&pm6150l_gpio 0 0 12>; + gpio-ranges = <&pm6150l_gpios 0 0 12>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; diff --git a/arch/arm64/boot/dts/qcom/pm8005.dtsi b/arch/arm64/boot/dts/qcom/pm8005.dtsi index 8d4b081b4e9d..0f0ab2da8305 100644 --- a/arch/arm64/boot/dts/qcom/pm8005.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8005.dtsi @@ -11,11 +11,11 @@ pm8005_lsid0: pmic@4 { #address-cells = <1>; #size-cells = <0>; - pm8005_gpio: gpio@c000 { + pm8005_gpios: gpio@c000 { compatible = "qcom,pm8005-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; - gpio-ranges = <&pm8005_gpio 0 0 4>; + gpio-ranges = <&pm8005_gpios 0 0 4>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; diff --git a/arch/arm64/boot/dts/qcom/pm8950.dtsi b/arch/arm64/boot/dts/qcom/pm8950.dtsi index 07c3896bd36f..631761f98999 100644 --- a/arch/arm64/boot/dts/qcom/pm8950.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8950.dtsi @@ -141,11 +141,11 @@ pm8950_mpps: mpps@a000 { #interrupt-cells = <2>; }; - pm8950_gpio: gpio@c000 { + pm8950_gpios: gpio@c000 { compatible = "qcom,pm8950-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; - gpio-ranges = <&pm8950_gpio 0 0 8>; + gpio-ranges = <&pm8950_gpios 0 0 8>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; diff --git a/arch/arm64/boot/dts/qcom/pm8998.dtsi b/arch/arm64/boot/dts/qcom/pm8998.dtsi index 6a5854333b2b..adbba9f4089a 100644 --- a/arch/arm64/boot/dts/qcom/pm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8998.dtsi @@ -109,11 +109,11 @@ rtc@6000 { interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; }; - pm8998_gpio: gpio@c000 { + pm8998_gpios: gpio@c000 { compatible = "qcom,pm8998-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; - gpio-ranges = <&pm8998_gpio 0 0 26>; + gpio-ranges = <&pm8998_gpios 0 0 26>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; diff --git a/arch/arm64/boot/dts/qcom/pmi8950.dtsi b/arch/arm64/boot/dts/qcom/pmi8950.dtsi index 8008f02434a9..4891be3cd68a 100644 --- a/arch/arm64/boot/dts/qcom/pmi8950.dtsi +++ b/arch/arm64/boot/dts/qcom/pmi8950.dtsi @@ -67,11 +67,11 @@ pmi8950_mpps: mpps@a000 { #interrupt-cells = <2>; }; - pmi8950_gpio: gpio@c000 { + pmi8950_gpios: gpio@c000 { compatible = "qcom,pmi8950-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; - gpio-ranges = <&pmi8950_gpio 0 0 2>; + gpio-ranges = <&pmi8950_gpios 0 0 2>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; diff --git a/arch/arm64/boot/dts/qcom/pmi8998.dtsi b/arch/arm64/boot/dts/qcom/pmi8998.dtsi index cd1caeae8281..ffe587f281d8 100644 --- a/arch/arm64/boot/dts/qcom/pmi8998.dtsi +++ b/arch/arm64/boot/dts/qcom/pmi8998.dtsi @@ -9,11 +9,11 @@ pmi8998_lsid0: pmic@2 { #address-cells = <1>; #size-cells = <0>; - pmi8998_gpio: gpio@c000 { + pmi8998_gpios: gpio@c000 { compatible = "qcom,pmi8998-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; - gpio-ranges = <&pmi8998_gpio 0 0 14>; + gpio-ranges = <&pmi8998_gpios 0 0 14>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts b/arch/arm64/boot/dts/qcom/sc7180-idp.dts index 70fd9ff8dfa2..7c2ff02eb869 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts @@ -304,7 +304,7 @@ panel@0 { pinctrl-names = "default"; pinctrl-0 = <&disp_pins>; - reset-gpios = <&pm6150l_gpio 3 GPIO_ACTIVE_HIGH>; + reset-gpios = <&pm6150l_gpios 3 GPIO_ACTIVE_HIGH>; ports { #address-cells = <1>; @@ -467,7 +467,7 @@ wifi-firmware { /* PINCTRL - additions to nodes defined in sc7180.dtsi */ -&pm6150l_gpio { +&pm6150l_gpios { disp_pins: disp-state { pinconf { pins = "gpio3"; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi index f1defb94d670..b82956f8f1cf 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi @@ -1141,11 +1141,11 @@ &sec_mi2s_active { /* PINCTRL - board-specific pinctrl */ -&pm6150_gpio { +&pm6150_gpios { status = "disabled"; /* No GPIOs are connected */ }; -&pm6150l_gpio { +&pm6150l_gpios { gpio-line-names = "AP_SUSPEND", "", "", diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi index ca676e04687b..ab9bf5282910 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi @@ -1096,7 +1096,7 @@ pinconf-rx { }; /* PINCTRL - board-specific pinctrl */ -&pm8005_gpio { +&pm8005_gpios { gpio-line-names = "", "", "SLB", @@ -1130,7 +1130,7 @@ adc-chan@51 { }; }; -&pm8998_gpio { +&pm8998_gpios { gpio-line-names = "", "", "SW_CTRL", diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts index f41c6d600ea8..7c3efe3cbf5b 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts @@ -54,7 +54,7 @@ gpio-keys { key-vol-up { label = "Volume Up"; linux,code = <KEY_VOLUMEUP>; - gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>; + gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>; }; }; @@ -65,7 +65,7 @@ led-0 { label = "green:user4"; function = LED_FUNCTION_INDICATOR; color = <LED_COLOR_ID_GREEN>; - gpios = <&pm8998_gpio 13 GPIO_ACTIVE_HIGH>; + gpios = <&pm8998_gpios 13 GPIO_ACTIVE_HIGH>; linux,default-trigger = "panic-indicator"; default-state = "off"; }; @@ -74,7 +74,7 @@ led-1 { label = "yellow:wlan"; function = LED_FUNCTION_WLAN; color = <LED_COLOR_ID_YELLOW>; - gpios = <&pm8998_gpio 9 GPIO_ACTIVE_HIGH>; + gpios = <&pm8998_gpios 9 GPIO_ACTIVE_HIGH>; linux,default-trigger = "phy0tx"; default-state = "off"; }; @@ -83,7 +83,7 @@ led-2 { label = "blue:bt"; function = LED_FUNCTION_BLUETOOTH; color = <LED_COLOR_ID_BLUE>; - gpios = <&pm8998_gpio 5 GPIO_ACTIVE_HIGH>; + gpios = <&pm8998_gpios 5 GPIO_ACTIVE_HIGH>; linux,default-trigger = "bluetooth-power"; default-state = "off"; }; @@ -148,7 +148,7 @@ cam0_dvdd_1v2: reg_cam0_dvdd_1v2 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; enable-active-high; - gpio = <&pm8998_gpio 12 GPIO_ACTIVE_HIGH>; + gpio = <&pm8998_gpios 12 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&cam0_dvdd_1v2_en_default>; vin-supply = <&vbat>; @@ -160,7 +160,7 @@ cam0_avdd_2v8: reg_cam0_avdd_2v8 { regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; enable-active-high; - gpio = <&pm8998_gpio 10 GPIO_ACTIVE_HIGH>; + gpio = <&pm8998_gpios 10 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&cam0_avdd_2v8_en_default>; vin-supply = <&vbat>; @@ -559,7 +559,7 @@ &pcie1_phy { vdda-pll-supply = <&vreg_l26a_1p2>; }; -&pm8998_gpio { +&pm8998_gpios { gpio-line-names = "NC", "NC", @@ -1170,7 +1170,7 @@ pinconf-rx { }; }; -&pm8998_gpio { +&pm8998_gpios { }; diff --git a/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi index 1eb423e4be24..f54d3302fb8a 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi @@ -132,7 +132,7 @@ gpio-keys { key-vol-up { label = "Volume up"; linux,code = <KEY_VOLUMEUP>; - gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>; + gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>; }; }; @@ -603,7 +603,7 @@ pinconf { }; }; -&pm8998_gpio { +&pm8998_gpios { vol_up_pin_a: vol-up-active-state { pins = "gpio6"; function = "normal"; diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi index 42cf4dd5ea28..f5751f3244cb 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi @@ -37,14 +37,14 @@ gpio-keys { key-vol-down { label = "Volume down"; linux,code = <KEY_VOLUMEDOWN>; - gpios = <&pm8998_gpio 5 GPIO_ACTIVE_LOW>; + gpios = <&pm8998_gpios 5 GPIO_ACTIVE_LOW>; debounce-interval = <15>; }; key-vol-up { label = "Volume up"; linux,code = <KEY_VOLUMEUP>; - gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>; + gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>; debounce-interval = <15>; }; }; @@ -440,7 +440,7 @@ &mss_pil { firmware-name = "qcom/sdm845/oneplus6/mba.mbn", "qcom/sdm845/oneplus6/modem.mbn"; }; -&pm8998_gpio { +&pm8998_gpios { volume_down_gpio: pm8998-gpio5-state { pinconf { pins = "gpio5"; diff --git a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts index bb77ccfdc68c..1934662c2bde 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts @@ -54,7 +54,7 @@ gpio-keys { key-vol-up { label = "volume_up"; linux,code = <KEY_VOLUMEUP>; - gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>; + gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>; debounce-interval = <15>; }; }; @@ -510,7 +510,7 @@ &mss_pil { firmware-name = "qcom/sdm845/axolotl/mba.mbn", "qcom/sdm845/axolotl/modem.mbn"; }; -&pm8998_gpio { +&pm8998_gpios { volume_up_gpio: pm8998-gpio6-state { pinconf { pins = "gpio6"; diff --git a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi index 87dd0fc36747..df92e8d7bf30 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi @@ -21,7 +21,7 @@ gpio-keys { key-vol-down { label = "volume_down"; - gpios = <&pm8998_gpio 5 GPIO_ACTIVE_LOW>; + gpios = <&pm8998_gpios 5 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEDOWN>; debounce-interval = <15>; gpio-key,wakeup; diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi index eb6b2b676eca..ba5a37cb3c9e 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi @@ -46,7 +46,7 @@ gpio-keys { key-vol-up { label = "Volume Up"; linux,code = <KEY_VOLUMEUP>; - gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>; + gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>; }; }; @@ -304,7 +304,7 @@ &ipa { firmware-name = "qcom/sdm845/beryllium/ipa_fws.mbn"; }; -&pm8998_gpio { +&pm8998_gpios { vol_up_pin_a: vol-up-active-state { pins = "gpio6"; function = "normal"; diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts index 38ba809a95cd..46346f7146ed 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts @@ -55,7 +55,7 @@ gpio-keys { key-vol-up { label = "Volume Up"; linux,code = <KEY_VOLUMEUP>; - gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>; + gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>; debounce-interval = <15>; }; }; @@ -518,7 +518,7 @@ &pmi8998_wled { status = "okay"; }; -&pm8998_gpio { +&pm8998_gpios { volume_up_gpio: pm8998-gpio6-state { pinconf { qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; diff --git a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts index 0de6c5b7f742..650819c028b6 100644 --- a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts +++ b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts @@ -217,7 +217,7 @@ rf-pa1-therm@3 { }; }; -&pm6125_gpio { +&pm6125_gpios { camera_flash_therm: camera-flash-therm-state { pins = "gpio3"; function = PMIC_GPIO_FUNC_NORMAL; -- 2.38.1
