Re: [PATCH] dt-bindings: mmc: Convert Fujitsu SDHCI to DT schema

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Dec 9, 2022 at 11:16 AM Rob Herring <robh@xxxxxxxxxx> wrote:
>
> Convert the Fujitsu SDHCI binding to DT schema format.
>
> The interrupts were not documented. The driver only uses the first
> interrupt, but the DT and example have 2 interrupts. The 2nd one is
> unknown. "dma-coherent" was also not documented, but is used.
>
> The "socionext,synquacer-sdhci" compatible was not documented, but it is
> compatible with "fujitsu,mb86s70-sdhci-3.0.yaml" and is in use (in
> u-boot Synquacer dts).
>
> Signed-off-by: Rob Herring <robh@xxxxxxxxxx>
> ---
>  .../mmc/fujitsu,mb86s70-sdhci-3.0.yaml        | 67 +++++++++++++++++++
>  .../devicetree/bindings/mmc/sdhci-fujitsu.txt | 32 ---------
>  2 files changed, 67 insertions(+), 32 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/mmc/fujitsu,mb86s70-sdhci-3.0.yaml
>  delete mode 100644 Documentation/devicetree/bindings/mmc/sdhci-fujitsu.txt
>
> diff --git a/Documentation/devicetree/bindings/mmc/fujitsu,mb86s70-sdhci-3.0.yaml b/Documentation/devicetree/bindings/mmc/fujitsu,mb86s70-sdhci-3.0.yaml
> new file mode 100644
> index 000000000000..0218a6ce4b2f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mmc/fujitsu,mb86s70-sdhci-3.0.yaml
> @@ -0,0 +1,67 @@
> +# SPDX-License-Identifier: GPL-2.0-only
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mmc/fujitsu,mb86s70-sdhci-3.0.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Fujitsu SDHCI controller
> +
> +maintainers:
> +  - Vincent Yang <Vincent.Yang@xxxxxxxxxxxxxx>

Bounces. Any other volunteers?

> +
> +allOf:
> +  - $ref: mmc-controller.yaml#
> +
> +properties:
> +  compatible:
> +    oneOf:
> +      - items:
> +          - const: socionext,synquacer-sdhci
> +          - const: fujitsu,mb86s70-sdhci-3.0
> +      - const: fujitsu,mb86s70-sdhci-3.0
> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    items:
> +      - description: Core clock
> +      - description: Interface clock
> +
> +  clock-names:
> +    items:
> +      - const: core
> +      - const: iface
> +
> +  dma-coherent: true
> +
> +  interrupts:
> +    maxItems: 2
> +
> +  fujitsu,cmd-dat-delay-select:
> +    type: boolean
> +    description: Indicating that the host requires the CMD_DAT_DELAY control
> +      to be enabled.
> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - clock-names
> +  - interrupts
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    mmc@36600000 {
> +        compatible = "fujitsu,mb86s70-sdhci-3.0";
> +        reg = <0x36600000 0x1000>;
> +        interrupts = <0 172 0x4>,
> +               <0 173 0x4>;
> +        bus-width = <4>;
> +        vqmmc-supply = <&vccq_sdhci1>;
> +        clocks = <&clock 2 2 0>, <&clock 2 3 0>;
> +        clock-names = "core", "iface";
> +    };
> +...
> diff --git a/Documentation/devicetree/bindings/mmc/sdhci-fujitsu.txt b/Documentation/devicetree/bindings/mmc/sdhci-fujitsu.txt
> deleted file mode 100644
> index 3ee9263adf73..000000000000
> --- a/Documentation/devicetree/bindings/mmc/sdhci-fujitsu.txt
> +++ /dev/null
> @@ -1,32 +0,0 @@
> -* Fujitsu SDHCI controller
> -
> -This file documents differences between the core properties in mmc.txt
> -and the properties used by the sdhci_f_sdh30 driver.
> -
> -Required properties:
> -- compatible: "fujitsu,mb86s70-sdhci-3.0"
> -- clocks: Must contain an entry for each entry in clock-names. It is a
> -  list of phandles and clock-specifier pairs.
> -  See ../clocks/clock-bindings.txt for details.
> -- clock-names: Should contain the following two entries:
> -       "iface" - clock used for sdhci interface
> -       "core"  - core clock for sdhci controller
> -
> -Optional properties:
> -- vqmmc-supply: phandle to the regulator device tree node, mentioned
> -  as the VCCQ/VDD_IO supply in the eMMC/SD specs.
> -- fujitsu,cmd-dat-delay-select: boolean property indicating that this host
> -  requires the CMD_DAT_DELAY control to be enabled.
> -
> -Example:
> -
> -       sdhci1: mmc@36600000 {
> -               compatible = "fujitsu,mb86s70-sdhci-3.0";
> -               reg = <0 0x36600000 0x1000>;
> -               interrupts = <0 172 0x4>,
> -                            <0 173 0x4>;
> -               bus-width = <4>;
> -               vqmmc-supply = <&vccq_sdhci1>;
> -               clocks = <&clock 2 2 0>, <&clock 2 3 0>;
> -               clock-names = "iface", "core";
> -       };
> --
> 2.35.1
>



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux