From: Yassine Oudjana <y.oudjana@xxxxxxxxxxxxxx> This series adds needed regulator management for the AK7375 VCM. A DT schema conversion is made before adding new properties. Changes since v2: - Increase delay to 10000 microseconds to match the AK7371 datasheet and because 3000 can be unstable sometimes. - Use dev_err_probe to report regulator parsing failure. - Remove AK7375_NUM_SUPPLIES macro. - Use unsigned int to index supply name array. Changes since v1: - Add vendor prefix to DT binding doc file name - Reorganize variable declaration - Change the power-on delay range to 3000-3500 microseconds. Yassine Oudjana (3): media: dt-bindings: ak7375: Convert to DT schema media: dt-bindings: ak7375: Add supplies media: i2c: ak7375: Add regulator management .../devicetree/bindings/media/i2c/ak7375.txt | 8 --- .../media/i2c/asahi-kasei,ak7375.yaml | 52 +++++++++++++++++++ MAINTAINERS | 2 +- drivers/media/i2c/ak7375.c | 38 ++++++++++++++ 4 files changed, 91 insertions(+), 9 deletions(-) delete mode 100644 Documentation/devicetree/bindings/media/i2c/ak7375.txt create mode 100644 Documentation/devicetree/bindings/media/i2c/asahi-kasei,ak7375.yaml -- 2.38.1