[PATCH 0/2] TI SN65DSI83 GPIO enable delay support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi all,

this small series adds a new optional property for specifying a platform
spefic enable delay. The LVDS Bridge requires at least a reset time of
10ms, but this is just the low pulse width. The actual rising time is a
different matter and is highly platform specific. My platform has a rising
time of ~110ms until the SN signal reaches VCC x 0.7 voltage level. Thus
make this time platform configurable.

Alexander Stein (2):
  dt-bindings: drm/bridge: ti-sn65dsi83: Add enable delay property
  drm: bridge: ti-sn65dsi83: Add enable delay support

 .../devicetree/bindings/display/bridge/ti,sn65dsi83.yaml   | 4 ++++
 drivers/gpu/drm/bridge/ti-sn65dsi83.c                      | 7 ++++++-
 2 files changed, 10 insertions(+), 1 deletion(-)

-- 
2.34.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux