On Fri, Oct 31, 2014 at 10:41:38AM +0100, Linus Walleij wrote:
> On Thu, Oct 30, 2014 at 5:15 PM, Mika Westerberg
> <mika.westerberg@xxxxxxxxxxxxxxx> wrote:
> > On Thu, Oct 30, 2014 at 04:40:05PM +0100, Linus Walleij wrote:
> >> > Yes, I'll just let dust to settle before sending out a patch that
> >> > converts the existing users of platform_gpio_blink_set() callback to
> >> > gpio descriptors.
> >>
> >> Dust settle = 2 weeks, 18 months, 5 years?
> >
> > I started to do the conversion already but then noticed that it is not
> > that trivial after all.
>
> Thanks for looking into this.
>
> > For example we have one user in arch/arm/mach-orion5x/dns323-setup.c:
> >
> > static struct gpio_led_platform_data dns323ab_led_data = {
> > .num_leds = ARRAY_SIZE(dns323ab_leds),
> > .leds = dns323ab_leds,
> > .gpio_blink_set = orion_gpio_led_blink_set,
> > };
> >
> > orion_gpio_led_blink_set() is part of orion specific custom GPIO
> > "driver" defined in arch/arm/plat-orion/gpio.c and as far as I can tell
> > cannot use GPIO descriptors as it directly programs these numbers to the
> > hardware.
> >
> > We can convert the descriptor to a number in the beginning of
> > orion_gpio_led_blink_set() if that helps.
> >
> > Other two users: rx1950_led_blink_set() and h1940_led_blink_set() seem
> > to have similar needs for the numeric value.
>
> Doing the conversion from descriptor to gpio number in the
> platforms is *much desired*, because it is a nice divide-and-conquer
> approach.
>
> For example mach-orion is going to be deleted and replaced
> with mach-mvebu at some time, so then part of the problem
> goes away entirely.
OK, thanks. I'll do the GPIO descriptor -> number conversions in the
platform code then.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
