The MangoPi MQ Pro is a tiny SBC with a layout compatible to the Raspberry Pi Zero. It includes the Allwinner D1 SoC, 512M or 1G of DDR3, and an RTL8723DS-based WiFi/Bluetooth module. The board also exposes GPIO Port E via a connector on the end of the board, which can support either a camera or an RMII Ethernet PHY. The additional regulators supply that connector. Acked-by: Jernej Skrabec <jernej.skrabec@xxxxxxxxx> Acked-by: Palmer Dabbelt <palmer@xxxxxxxxxxxx> Reviewed-by: Guo Ren <guoren@xxxxxxxxxx> Signed-off-by: Samuel Holland <samuel@xxxxxxxxxxxx> --- Changes in v3: - Drop mmc alias - Change LED_FUNCTION_BACKLIGHT to LED_FUNCTION_STATUS (the backlight regulator is disconnected by default, so this is a standalone LED) Changes in v2: - Added LED (GPIO shared between onboard LED and backlight regulator) arch/riscv/boot/dts/allwinner/Makefile | 1 + .../allwinner/sun20i-d1-mangopi-mq-pro.dts | 142 ++++++++++++++++++ 2 files changed, 143 insertions(+) create mode 100644 arch/riscv/boot/dts/allwinner/sun20i-d1-mangopi-mq-pro.dts diff --git a/arch/riscv/boot/dts/allwinner/Makefile b/arch/riscv/boot/dts/allwinner/Makefile index f1c70b9dc9bf..2ed586fafaea 100644 --- a/arch/riscv/boot/dts/allwinner/Makefile +++ b/arch/riscv/boot/dts/allwinner/Makefile @@ -3,5 +3,6 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1-lichee-rv-86-panel-480p.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1-lichee-rv-86-panel-720p.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1-lichee-rv-dock.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1-lichee-rv.dtb +dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1-mangopi-mq-pro.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1-nezha.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1s-mangopi-mq.dtb diff --git a/arch/riscv/boot/dts/allwinner/sun20i-d1-mangopi-mq-pro.dts b/arch/riscv/boot/dts/allwinner/sun20i-d1-mangopi-mq-pro.dts new file mode 100644 index 000000000000..f2e07043afb3 --- /dev/null +++ b/arch/riscv/boot/dts/allwinner/sun20i-d1-mangopi-mq-pro.dts @@ -0,0 +1,142 @@ +// SPDX-License-Identifier: (GPL-2.0+ or MIT) +// Copyright (C) 2022 Samuel Holland <samuel@xxxxxxxxxxxx> + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> + +/dts-v1/; + +#include "sun20i-d1.dtsi" +#include "sun20i-common-regulators.dtsi" + +/ { + model = "MangoPi MQ Pro"; + compatible = "widora,mangopi-mq-pro", "allwinner,sun20i-d1"; + + aliases { + ethernet0 = &rtl8723ds; + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + + led-0 { + color = <LED_COLOR_ID_BLUE>; + function = LED_FUNCTION_STATUS; + gpios = <&pio 3 18 GPIO_ACTIVE_HIGH>; /* PD18 */ + }; + }; + + reg_avdd2v8: avdd2v8 { + compatible = "regulator-fixed"; + regulator-name = "avdd2v8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + vin-supply = <®_vcc_3v3>; + }; + + reg_dvdd: dvdd { + compatible = "regulator-fixed"; + regulator-name = "dvdd"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + vin-supply = <®_vcc_3v3>; + }; + + reg_vdd_cpu: vdd-cpu { + compatible = "regulator-fixed"; + regulator-name = "vdd-cpu"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + vin-supply = <®_vcc>; + }; + + wifi_pwrseq: wifi-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&pio 6 17 GPIO_ACTIVE_LOW>; /* PG17 */ + }; +}; + +&cpu0 { + cpu-supply = <®_vdd_cpu>; +}; + +&dcxo { + clock-frequency = <24000000>; +}; + +&ehci1 { + status = "okay"; +}; + +&mmc0 { + bus-width = <4>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */ + disable-wp; + vmmc-supply = <®_vcc_3v3>; + vqmmc-supply = <®_vcc_3v3>; + pinctrl-0 = <&mmc0_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&mmc1 { + bus-width = <4>; + mmc-pwrseq = <&wifi_pwrseq>; + non-removable; + vmmc-supply = <®_vcc_3v3>; + vqmmc-supply = <®_vcc_3v3>; + pinctrl-0 = <&mmc1_pins>; + pinctrl-names = "default"; + status = "okay"; + + rtl8723ds: wifi@1 { + reg = <1>; + interrupt-parent = <&pio>; + interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 */ + interrupt-names = "host-wake"; + }; +}; + +&ohci1 { + status = "okay"; +}; + +&pio { + vcc-pe-supply = <®_avdd2v8>; +}; + +&uart0 { + pinctrl-0 = <&uart0_pb8_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&uart1 { + uart-has-rtscts; + pinctrl-0 = <&uart1_pg6_pins>, <&uart1_pg8_rts_cts_pins>; + pinctrl-names = "default"; + status = "okay"; + + bluetooth { + compatible = "realtek,rtl8723ds-bt"; + device-wake-gpios = <&pio 6 18 GPIO_ACTIVE_HIGH>; /* PG18 */ + enable-gpios = <&pio 6 15 GPIO_ACTIVE_HIGH>; /* PG15 */ + host-wake-gpios = <&pio 6 14 GPIO_ACTIVE_HIGH>; /* PG14 */ + }; +}; + +&usb_otg { + dr_mode = "peripheral"; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_vcc>; + status = "okay"; +}; -- 2.37.4