On 2022/12/7 22:16, Emil Renner Berthing wrote:
> Hi Yanhong,
>
> Thanks for submitting this. Again please don't change the author of
> the commits you cherry-picked from my tree. This is why we have the
> Co-developed-by: tag so you can mark that you added or in this case
> removed code.
This commit is not cherry-picked from your tree.
> I'd hoped you would still include the support for the JH7100 though.
>
If necessary, would include the support for the JH7100 in the next version.
> Also you seem to have changed the name of some of the functions.
> Please at least keep the prefix consistent if you do that. Now it's a
> mix of dwmac_starfive_, starfive_eth_ and starfive_eth_plat.
>
> On Thu, 1 Dec 2022 at 10:07, Yanhong Wang <yanhong.wang@xxxxxxxxxxxxxxxx> wrote:
>>
>> This adds StarFive dwmac driver support on the StarFive JH7110 SoCs.
>>
>> Signed-off-by: Yanhong Wang <yanhong.wang@xxxxxxxxxxxxxxxx>
>> ---
>> MAINTAINERS | 1 +
>> drivers/net/ethernet/stmicro/stmmac/Kconfig | 11 ++
>> drivers/net/ethernet/stmicro/stmmac/Makefile | 1 +
>> .../stmicro/stmmac/dwmac-starfive-plat.c | 147 ++++++++++++++++++
>> 4 files changed, 160 insertions(+)
>> create mode 100644 drivers/net/ethernet/stmicro/stmmac/dwmac-starfive-plat.c
>>
>> diff --git a/MAINTAINERS b/MAINTAINERS
>> index 7eaaec8d3b96..36cb00cf860b 100644
>> --- a/MAINTAINERS
>> +++ b/MAINTAINERS
>> @@ -19610,6 +19610,7 @@ STARFIVE DWMAC GLUE LAYER
>> M: Yanhong Wang <yanhong.wang@xxxxxxxxxxxxxxxx>
>> S: Maintained
>> F: Documentation/devicetree/bindings/net/starfive,dwmac-plat.yaml
>> +F: drivers/net/ethernet/stmicro/stmmac/dwmac-starfive-plat.c
>>
>> STARFIVE PINCTRL DRIVER
>> M: Emil Renner Berthing <kernel@xxxxxxxx>
>> diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig
>> index 31ff35174034..1e29cd3770b9 100644
>> --- a/drivers/net/ethernet/stmicro/stmmac/Kconfig
>> +++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig
>> @@ -235,6 +235,17 @@ config DWMAC_INTEL_PLAT
>> the stmmac device driver. This driver is used for the Intel Keem Bay
>> SoC.
>>
>> +config DWMAC_STARFIVE_PLAT
>
> Why did you add the _PLAT suffix? None of the other SoC wrappers have this..
The _PLAT suffix definition reference the other SoC,such as DWMAC_INTEL_PLAT.
>
>> + tristate "StarFive dwmac support"
>> + depends on OF && COMMON_CLK
>> + depends on STMMAC_ETH
>> + default SOC_STARFIVE
>> + help
>> + Support for ethernet controllers on StarFive RISC-V SoCs
>> +
>> + This selects the StarFive platform specific glue layer support for
>> + the stmmac device driver. This driver is used for StarFive RISC-V SoCs.
>> +
>> config DWMAC_VISCONTI
>> tristate "Toshiba Visconti DWMAC support"
>> default ARCH_VISCONTI
>> diff --git a/drivers/net/ethernet/stmicro/stmmac/Makefile b/drivers/net/ethernet/stmicro/stmmac/Makefile
>> index d4e12e9ace4f..a63ab0ab5071 100644
>> --- a/drivers/net/ethernet/stmicro/stmmac/Makefile
>> +++ b/drivers/net/ethernet/stmicro/stmmac/Makefile
>> @@ -31,6 +31,7 @@ obj-$(CONFIG_DWMAC_DWC_QOS_ETH) += dwmac-dwc-qos-eth.o
>> obj-$(CONFIG_DWMAC_INTEL_PLAT) += dwmac-intel-plat.o
>> obj-$(CONFIG_DWMAC_GENERIC) += dwmac-generic.o
>> obj-$(CONFIG_DWMAC_IMX8) += dwmac-imx.o
>> +obj-$(CONFIG_DWMAC_STARFIVE_PLAT) += dwmac-starfive-plat.o
>> obj-$(CONFIG_DWMAC_VISCONTI) += dwmac-visconti.o
>> stmmac-platform-objs:= stmmac_platform.o
>> dwmac-altr-socfpga-objs := altr_tse_pcs.o dwmac-socfpga.o
>> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-starfive-plat.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-starfive-plat.c
>> new file mode 100644
>> index 000000000000..8fbf584d4e19
>> --- /dev/null
>> +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-starfive-plat.c
>> @@ -0,0 +1,147 @@
>> +// SPDX-License-Identifier: GPL-2.0+
>> +/*
>> + * StarFive DWMAC platform driver
>> + *
>> + * Copyright(C) 2022 StarFive Technology Co., Ltd.
>
> Hmm.. where did my copyright go?
>
>> + *
>> + */
>> +
>> +#include <linux/of_device.h>
>> +#include "stmmac_platform.h"
>> +
>> +struct starfive_dwmac {
>> + struct device *dev;
>> + struct clk *clk_tx;
>> + struct clk *clk_gtx;
>> + struct clk *clk_gtxc;
>> +};
>> +
>> +static void starfive_eth_fix_mac_speed(void *priv, unsigned int speed)
>> +{
>> + struct starfive_dwmac *dwmac = priv;
>> + unsigned long rate;
>> + int err;
>> +
>> + switch (speed) {
>> + case SPEED_1000:
>> + rate = 125000000;
>> + break;
>> + case SPEED_100:
>> + rate = 25000000;
>> + break;
>> + case SPEED_10:
>> + rate = 2500000;
>> + break;
>> + default:
>> + dev_err(dwmac->dev, "invalid speed %u\n", speed);
>> + return;
>> + }
>> +
>> + err = clk_set_rate(dwmac->clk_gtx, rate);
>> + if (err)
>> + dev_err(dwmac->dev, "failed to set tx rate %lu\n", rate);
>> +}
>> +
>> +static void dwmac_starfive_clk_disable(void *clk)
>> +{
>> + clk_disable_unprepare(clk);
>> +}
>> +
>> +static int starfive_eth_plat_probe(struct platform_device *pdev)
>> +{
>> + struct plat_stmmacenet_data *plat_dat;
>> + struct stmmac_resources stmmac_res;
>> + struct starfive_dwmac *dwmac;
>> + int err;
>> +
>> + err = stmmac_get_platform_resources(pdev, &stmmac_res);
>> + if (err)
>> + return err;
>> +
>> + plat_dat = stmmac_probe_config_dt(pdev, stmmac_res.mac);
>> + if (IS_ERR(plat_dat)) {
>> + dev_err(&pdev->dev, "dt configuration failed\n");
>> + return PTR_ERR(plat_dat);
>> + }
>> +
>> + dwmac = devm_kzalloc(&pdev->dev, sizeof(*dwmac), GFP_KERNEL);
>> + if (!dwmac)
>> + return -ENOMEM;
>> +
>> + dwmac->clk_tx = devm_clk_get(&pdev->dev, "tx");
>> + if (IS_ERR(dwmac->clk_tx))
>> + return dev_err_probe(&pdev->dev, PTR_ERR(dwmac->clk_tx),
>> + "error getting tx clock\n");
>> +
>> + err = devm_add_action(&pdev->dev, dwmac_starfive_clk_disable,
>> + dwmac->clk_tx);
>> + if (err)
>> + return err;
>> +
>> + err = clk_prepare_enable(dwmac->clk_tx);
>> + if (err)
>> + return dev_err_probe(&pdev->dev, err, "error enabling tx clock\n");
>> +
>> + dwmac->clk_gtx = devm_clk_get(&pdev->dev, "gtx");
>> + if (IS_ERR(dwmac->clk_gtx))
>> + return dev_err_probe(&pdev->dev, PTR_ERR(dwmac->clk_gtx),
>> + "error getting gtx clock\n");
>> +
>> + err = devm_add_action(&pdev->dev, dwmac_starfive_clk_disable,
>> + dwmac->clk_gtx);
>> + if (err)
>> + return err;
>> +
>> + err = clk_prepare_enable(dwmac->clk_gtx);
>> + if (err)
>> + return dev_err_probe(&pdev->dev, err, "error enabling gtx clock\n");
>
> I think the 3 calls above can be simplified to devm_clk_get_enabled().
I'll simplify it to devm_ clk_ get_ enabled() in the next version.
>
>> + dwmac->clk_gtxc = devm_clk_get(&pdev->dev, "gtxc");
>> + if (IS_ERR(dwmac->clk_gtxc))
>> + return dev_err_probe(&pdev->dev, PTR_ERR(dwmac->clk_gtxc),
>> + "error getting gtxc clock\n");
>> +
>> + err = devm_add_action(&pdev->dev, dwmac_starfive_clk_disable,
>> + dwmac->clk_gtxc);
>> + if (err)
>> + return err;
>> +
>> + err = clk_prepare_enable(dwmac->clk_gtxc);
>> + if (err)
>> + return dev_err_probe(&pdev->dev, err, "error enabling gtxc clock\n");
>
> Same here.
>
>> +
>> + dwmac->dev = &pdev->dev;
>> + plat_dat->fix_mac_speed = starfive_eth_fix_mac_speed;
>> + plat_dat->init = NULL;
>> + plat_dat->bsp_priv = dwmac;
>> + plat_dat->dma_cfg->dche = true;
>> +
>> + err = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
>> + if (err) {
>> + stmmac_remove_config_dt(pdev, plat_dat);
>> + return err;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static const struct of_device_id starfive_eth_plat_match[] = {
>> + {.compatible = "starfive,dwmac"},
>> + { }
>> +};
>> +
>> +static struct platform_driver starfive_eth_plat_driver = {
>> + .probe = starfive_eth_plat_probe,
>> + .remove = stmmac_pltfr_remove,
>> + .driver = {
>> + .name = "starfive-eth-plat",
>> + .pm = &stmmac_pltfr_pm_ops,
>> + .of_match_table = starfive_eth_plat_match,
>> + },
>> +};
>> +
>> +module_platform_driver(starfive_eth_plat_driver);
>> +
>> +MODULE_LICENSE("GPL");
>> +MODULE_DESCRIPTION("StarFive DWMAC platform driver");
>
> Here you also seem to have removed me.
>
>> +MODULE_AUTHOR("Yanhong Wang <yanhong.wang@xxxxxxxxxxxxxxxx>");
>> --
>> 2.17.1
>>
>>
>> _______________________________________________
>> linux-riscv mailing list
>> linux-riscv@xxxxxxxxxxxxxxxxxxx
>> http://lists.infradead.org/mailman/listinfo/linux-riscv
