Re: [PATCH v3 3/3] mmc: xenon: Fix 2G limitation on AC5 SoC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Dec 5, 2022 at 12:00 PM Vadym Kochan <vadym.kochan@xxxxxxxxxxx> wrote:

> There is a limitation on AC5 SoC that mmc controller
> can't have DMA access over 2G memory,

That sounds like a pretty common problem when someone
uses a 32bit address register in their DMA controller, or
the integration engineer not connecting all address lines... :/

>  so use SDMA with a bounce buffer. Swiotlb can't help because
> on arm64 arch it reserves memblock's at the end of the memory.

OK

This:

> Additionally set mask to 34 bit since on AC5 SoC RAM starts
> at 0x2_00000000.
(...)
> +static int xenon_set_dma_mask(struct sdhci_host *host)
> +{
> +       struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> +       struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
> +       struct mmc_host *mmc = host->mmc;
> +       struct device *dev = mmc_dev(mmc);
> +
> +       if (priv->hw_version == XENON_AC5) {
> +               host->flags &= ~SDHCI_USE_64_BIT_DMA;
> +
> +               return dma_set_mask_and_coherent(dev, DMA_BIT_MASK(34));
> +       }
> +
> +       return sdhci_set_dma_mask(host);
> +}
(...)
> +       .set_dma_mask           = xenon_set_dma_mask,

I don't know if is so good to assume the size and location of the
SoC RAM like you do, that looks really fragile.

Can't you check what physical RAM Linux actually think
it has and where? You partly check it with meminfo below.

> +static int xenon_ac5_probe(struct sdhci_host *host)
> +{
> +       struct sysinfo si;
> +
> +       si_meminfo(&si);
> +
> +       if ((si.totalram * si.mem_unit) > SZ_2G)

This looks like a bug since you mention that the RAM does
not start at 0x00000000 this means if the memory is
2G it will partly be at physical addresses above 2G....

> +               host->quirks |= SDHCI_QUIRK_BROKEN_ADMA;
> +
> +       return 0;
> +}

Here you check how big the RAM is using meminfo (if the
bug is fixed).

But is this really a good solution? ADMA still works on the lower
2GB does it not?

What you want is a new quirk that bounces only when you
go above SZ_4G.

There *is* SDHCI_QUIRK_32BIT_DMA_ADDR have you
tried this? A 32bit DMA address is literally 4GB.
I think all you need to do is set this flag for xenon.

Yours,
Linus Walleij



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux