From: Gyungoh Yoo <jack.yoo@xxxxxxxxxxxxxxx>
Signed-off-by: Gyungoh Yoo <jack.yoo@xxxxxxxxxxxxxxx>
---
Changes v6:
Nothing
Changes v5:
Nothing
Changes v4:
Nothing
Changes v3:
Nothing
Changes v2:
Added reg attribute for I2C slave address
.../video/backlight/sky81452-backlight.txt | 24 ++++++++++++++++++++++
1 file changed, 24 insertions(+)
create mode 100644 Documentation/devicetree/bindings/video/backlight/sky81452-backlight.txt
diff --git a/Documentation/devicetree/bindings/video/backlight/sky81452-backlight.txt b/Documentation/devicetree/bindings/video/backlight/sky81452-backlight.txt
new file mode 100644
index 0000000..2c2d947
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/backlight/sky81452-backlight.txt
@@ -0,0 +1,24 @@
+SKY81452-backlight bindings
+
+Required properties:
+- compatible : Must be "skyworks,sky81452-backlight"
+
+Optional properties:
+- name : Name of backlight device. Default is 'lcd-backlight'.
+- gpio-enable : GPIO to use to EN pin.
+- enable : Enable mask for current sink channel 1 to 6.
+- ignore-pwm : Ignore both PWM input
+- dpwm-mode : Enable DPWM dimming mode, otherwise Analog dimming mode
+- phase-shift : Enable phase shift mode
+- ovp-level : Over-voltage protection level. Should be between 14 or 28V.
+- short-detection-threshold : It should be one of 4, 5, 6 and 7V.
+- boost-current-limit : It should be one of 800, 1100 and 1500mA.
+
+Example:
+
+ backlight {
+ compatible = "skyworks,sky81452-backlight";
+ name = "pwm-backlight";
+ enable = <0x3F>;
+ ignore-pwm;
+ };
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
