This nvmem cell is present on SDM670 as well as SDM845. Add it in SDM670
so there is proper tuning.
Signed-off-by: Richard Acayan <mailingradian@xxxxxxxxx>
---
Changes since v1:
- remove "primary" indicator (SDM670 only has one USB controller)
arch/arm64/boot/dts/qcom/sdm670.dtsi | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sdm670.dtsi b/arch/arm64/boot/dts/qcom/sdm670.dtsi
index c78156e03d93..fcea26ba7fe9 100644
--- a/arch/arm64/boot/dts/qcom/sdm670.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm670.dtsi
@@ -736,6 +736,11 @@ qfprom: qfprom@784000 {
reg = <0 0x00784000 0 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
+
+ qusb2_hstx_trim: hstx-trim@1eb {
+ reg = <0x1eb 0x1>;
+ bits = <1 4>;
+ };
};
sdhc_1: mmc@7c4000 {
@@ -1418,6 +1423,8 @@ usb_1_hsphy: phy@88e2000 {
resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+ nvmem-cells = <&qusb2_hstx_trim>;
+
status = "disabled";
};
--
2.38.1
