Add support for the ACPI-based device registration, so that the driver can be also enabled through ACPI table. Signed-off-by: Binbin Zhou <zhoubinbin@xxxxxxxxxxx> --- drivers/i2c/busses/i2c-gpio.c | 27 +++++++++++++++++---------- 1 file changed, 17 insertions(+), 10 deletions(-) diff --git a/drivers/i2c/busses/i2c-gpio.c b/drivers/i2c/busses/i2c-gpio.c index 0e4385a9bcf7..7bec473cd6b1 100644 --- a/drivers/i2c/busses/i2c-gpio.c +++ b/drivers/i2c/busses/i2c-gpio.c @@ -13,7 +13,6 @@ #include <linux/init.h> #include <linux/interrupt.h> #include <linux/module.h> -#include <linux/of.h> #include <linux/platform_data/i2c-gpio.h> #include <linux/platform_device.h> #include <linux/slab.h> @@ -300,22 +299,23 @@ static inline void i2c_gpio_fault_injector_init(struct platform_device *pdev) {} static inline void i2c_gpio_fault_injector_exit(struct platform_device *pdev) {} #endif /* CONFIG_I2C_GPIO_FAULT_INJECTOR*/ -static void of_i2c_gpio_get_props(struct device_node *np, - struct i2c_gpio_platform_data *pdata) +/* Get i2c-gpio properties from DT or ACPI table */ +static void i2c_gpio_get_properties(struct device *dev, + struct i2c_gpio_platform_data *pdata) { u32 reg; - of_property_read_u32(np, "i2c-gpio,delay-us", &pdata->udelay); + device_property_read_u32(dev, "i2c-gpio,delay-us", &pdata->udelay); - if (!of_property_read_u32(np, "i2c-gpio,timeout-ms", ®)) + if (!device_property_read_u32(dev, "i2c-gpio,timeout-ms", ®)) pdata->timeout = msecs_to_jiffies(reg); pdata->sda_is_open_drain = - of_property_read_bool(np, "i2c-gpio,sda-open-drain"); + device_property_read_bool(dev, "i2c-gpio,sda-open-drain"); pdata->scl_is_open_drain = - of_property_read_bool(np, "i2c-gpio,scl-open-drain"); + device_property_read_bool(dev, "i2c-gpio,scl-open-drain"); pdata->scl_is_output_only = - of_property_read_bool(np, "i2c-gpio,scl-output-only"); + device_property_read_bool(dev, "i2c-gpio,scl-output-only"); } static struct gpio_desc *i2c_gpio_get_desc(struct device *dev, @@ -373,8 +373,8 @@ static int i2c_gpio_probe(struct platform_device *pdev) bit_data = &priv->bit_data; pdata = &priv->pdata; - if (np) { - of_i2c_gpio_get_props(np, pdata); + if (dev_fwnode(dev)) { + i2c_gpio_get_properties(dev, pdata); } else { /* * If all platform data settings are zero it is OK @@ -489,10 +489,17 @@ static const struct of_device_id i2c_gpio_dt_ids[] = { MODULE_DEVICE_TABLE(of, i2c_gpio_dt_ids); +static const struct acpi_device_id i2c_gpio_acpi_match[] = { + { "LOON0005" }, /* LoongArch */ + { } +}; +MODULE_DEVICE_TABLE(acpi, i2c_gpio_acpi_match); + static struct platform_driver i2c_gpio_driver = { .driver = { .name = "i2c-gpio", .of_match_table = i2c_gpio_dt_ids, + .acpi_match_table = i2c_gpio_acpi_match, }, .probe = i2c_gpio_probe, .remove = i2c_gpio_remove, -- 2.31.1