From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxxxxx>
The reset line is active low for the Goodix touchscreen controller so
let's fix the polarity in the Device Tree node.
Signed-off-by: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxxxxx>
---
arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
index 6445c6b90b5bb..b038300812b1e 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
@@ -542,7 +542,7 @@ touchscreen@5d {
pinctrl-0 = <&pinctrl_ts>;
interrupt-parent = <&gpio3>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
- reset-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
irq-gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
touchscreen-size-x = <720>;
touchscreen-size-y = <1440>;
--
b4 0.10.1
