Re: [PATCH v3 3/3] arm64: dts: qcom: sdm845: do not customize SPI0 pin drive/bias

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On Fri, Dec 2, 2022 at 7:57 AM Krzysztof Kozlowski
<krzysztof.kozlowski@xxxxxxxxxx> wrote:
>
> Each board should define pin drive/bias for used busses.  All boards
> using SPI0 (db845c and cheza) already do it, so drop the bias/drive
> strength from SoC DTSI.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
>
> ---
>
> Cc: Doug Anderson <dianders@xxxxxxxxxxxx>
>
> Changes since v2:
> 1. New patch.
> ---
>  arch/arm64/boot/dts/qcom/sdm845.dtsi | 2 --
>  1 file changed, 2 deletions(-)

Reviewed-by: Douglas Anderson <dianders@xxxxxxxxxxxx>

It's hard to review device trees without noticing things that are
inefficient / wrong. In case you want any others for your list:

a) As written today, `sdm845-db845c.dts` doesn't actually need to
override the `pinctrl` of `spi0` since it's the default. So you could
remove two extra lines of device tree.

b) Officially, db845c actually _should_ be overriding the pinctrl and
we should be doing something like what we did for sc7180 where we have
different definitions for "cs" and "cs_gpio" for the SPI lines. That's
because db845c is actually using "cs-gpio" mode for this SPI part and
thus GPIO3 should be marked as being "gpio", not "qup0". It doesn't
really matter functionality-wise on Linux because the Qualcomm pinctrl
driver will automatically re-mux the pin as a GPIO the moment the SPI
core tries to use it as such, but it's a little ugly.



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux