On Fri, 02 Dec 2022 01:56:53 +0300, Dmitry Rokosov wrote: > From: Jian Hu <jian.hu@xxxxxxxxxxx> > > Add the documentation to support Amlogic A1 PLL clock driver, > and add A1 PLL clock controller bindings. > > Signed-off-by: Jian Hu <jian.hu@xxxxxxxxxxx> > Signed-off-by: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxx> > --- > .../bindings/clock/amlogic,a1-pll-clkc.yaml | 52 +++++++++++++++++++ > include/dt-bindings/clock/a1-pll-clkc.h | 16 ++++++ > 2 files changed, 68 insertions(+) > create mode 100644 Documentation/devicetree/bindings/clock/amlogic,a1-pll-clkc.yaml > create mode 100644 include/dt-bindings/clock/a1-pll-clkc.h > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: ./Documentation/devicetree/bindings/clock/amlogic,a1-pll-clkc.yaml:26:6: [warning] wrong indentation: expected 6 but found 5 (indentation) dtschema/dtc warnings/errors: ./Documentation/devicetree/bindings/clock/amlogic,a1-pll-clkc.yaml: $id: relative path/filename doesn't match actual path or filename expected: http://devicetree.org/schemas/clock/amlogic,a1-pll-clkc.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/clock/amlogic,a1-pll-clkc.example.dtb: pll-clock-controller@7c80: reg: [[0, 31872], [0, 396]] is too long From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/clock/amlogic,a1-pll-clkc.yaml doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20221201225703.6507-2-ddrokosov@xxxxxxxxxxxxxx The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
