On Thu, 01 Dec 2022 05:46:41 +0100, Saravanan Sekar wrote:
> Document mpq7932 power-management IC
>
> Signed-off-by: Saravanan Sekar <saravanan@xxxxxxxxxxx>
> ---
> .../bindings/hwmon/pmbus/mps,mpq7932.yaml | 63 +++++++++++++++++++
> 1 file changed, 63 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/hwmon/pmbus/mps,mpq7932.yaml
>
My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):
yamllint warnings/errors:
dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/hwmon/pmbus/mps,mpq7932.example.dtb: pmic@3: regulators: Additional properties are not allowed ('buck1' was unexpected)
From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/hwmon/pmbus/mps,mpq7932.yaml
doc reference errors (make refcheckdocs):
See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20221201044643.1150870-3-saravanan@xxxxxxxxxxx
The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.
