The MPQ7932 is a power management IC designed to operate from 5V buses to
power a variety of Advanced driver-assistance system SOCs. Six integrated
buck converters with hardware monitoring capability powers a variety of
target rails configurable over PMBus interface.
Signed-off-by: Saravanan Sekar <saravanan@xxxxxxxxxxx>
---
drivers/hwmon/pmbus/Kconfig | 10 +++
drivers/hwmon/pmbus/Makefile | 1 +
drivers/hwmon/pmbus/mpq7932.c | 144 ++++++++++++++++++++++++++++++++++
3 files changed, 155 insertions(+)
create mode 100644 drivers/hwmon/pmbus/mpq7932.c
diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
index 89668af67206..4a1538949a73 100644
--- a/drivers/hwmon/pmbus/Kconfig
+++ b/drivers/hwmon/pmbus/Kconfig
@@ -317,6 +317,16 @@ config SENSORS_MP5023
This driver can also be built as a module. If so, the module will
be called mp5023.
+config SENSORS_MPQ7932
+ tristate "MPS MPQ7932"
+ help
+ If you say yes here you get six integrated buck converter regulator
+ with hardware monitoring functionality support for power management
+ IC MPS MPQ7932.
+
+ This driver can also be built as a module. If so, the module will
+ be called mpq7932.
+
config SENSORS_PIM4328
tristate "Flex PIM4328 and compatibles"
help
diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile
index 0002dbe22d52..28a534629cc3 100644
--- a/drivers/hwmon/pmbus/Makefile
+++ b/drivers/hwmon/pmbus/Makefile
@@ -34,6 +34,7 @@ obj-$(CONFIG_SENSORS_MAX8688) += max8688.o
obj-$(CONFIG_SENSORS_MP2888) += mp2888.o
obj-$(CONFIG_SENSORS_MP2975) += mp2975.o
obj-$(CONFIG_SENSORS_MP5023) += mp5023.o
+obj-$(CONFIG_SENSORS_MPQ7932_REGULATOR) += mpq7932.o
obj-$(CONFIG_SENSORS_PLI1209BC) += pli1209bc.o
obj-$(CONFIG_SENSORS_PM6764TR) += pm6764tr.o
obj-$(CONFIG_SENSORS_PXE1610) += pxe1610.o
diff --git a/drivers/hwmon/pmbus/mpq7932.c b/drivers/hwmon/pmbus/mpq7932.c
new file mode 100644
index 000000000000..3747d7862afd
--- /dev/null
+++ b/drivers/hwmon/pmbus/mpq7932.c
@@ -0,0 +1,144 @@
+/*
+ * SPDX-License-Identifier: GPL-2.0+
+ *
+ * mpq7932.c - regulator driver for mps mpq7932
+ * Copyright 2022 Monolithic Power Systems, Inc
+ *
+ * Author: Saravanan Sekar <saravanan@xxxxxxxxxxx>
+ */
+
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/pmbus.h>
+#include "pmbus.h"
+
+#define MPQ7932_BUCK_UV_MIN 206250
+#define MPQ7932_UV_STEP 6250
+#define MPQ7932_N_VOLTAGES 0xFF
+#define MPQ7932_NUM_PAGES 6
+
+#define MPQ7932_TON_DELAY 0x60
+#define MPQ7932_VOUT_STARTUP_SLEW 0xA3
+#define MPQ7932_VOUT_SHUTDOWN_SLEW 0xA5
+#define MPQ7932_VOUT_SLEW_MASK GENMASK(1, 0)
+#define MPQ7932_TON_DELAY_MASK GENMASK(4, 0)
+
+struct mpq7932_data {
+ struct pmbus_driver_info info;
+ struct pmbus_platform_data pdata;
+};
+
+static struct regulator_desc mpq7932_regulators_desc[] = {
+ PMBUS_REGULATOR_STEP("buck", 0, MPQ7932_N_VOLTAGES,
+ MPQ7932_UV_STEP, MPQ7932_BUCK_UV_MIN),
+ PMBUS_REGULATOR_STEP("buck", 1, MPQ7932_N_VOLTAGES,
+ MPQ7932_UV_STEP, MPQ7932_BUCK_UV_MIN),
+ PMBUS_REGULATOR_STEP("buck", 2, MPQ7932_N_VOLTAGES,
+ MPQ7932_UV_STEP, MPQ7932_BUCK_UV_MIN),
+ PMBUS_REGULATOR_STEP("buck", 3, MPQ7932_N_VOLTAGES,
+ MPQ7932_UV_STEP, MPQ7932_BUCK_UV_MIN),
+ PMBUS_REGULATOR_STEP("buck", 4, MPQ7932_N_VOLTAGES,
+ MPQ7932_UV_STEP, MPQ7932_BUCK_UV_MIN),
+ PMBUS_REGULATOR_STEP("buck", 5, MPQ7932_N_VOLTAGES,
+ MPQ7932_UV_STEP, MPQ7932_BUCK_UV_MIN),
+};
+
+static int mpq7932_write_word_data(struct i2c_client *client, int page, int reg,
+ u16 word)
+{
+
+ switch (reg) {
+ case PMBUS_VOUT_COMMAND:
+ return pmbus_write_byte_data(client, page, reg, (u8)word);
+
+ default:
+ return -ENODATA;
+ }
+}
+
+static int mpq7932_read_word_data(struct i2c_client *client, int page,
+ int phase, int reg)
+{
+
+ switch (reg) {
+ case PMBUS_MFR_VOUT_MIN:
+ return 0;
+
+ case PMBUS_MFR_VOUT_MAX:
+ return MPQ7932_N_VOLTAGES;
+
+ case PMBUS_READ_VOUT:
+ return pmbus_read_byte_data(client, page, PMBUS_VOUT_COMMAND);
+
+ default:
+ return -ENODATA;
+ }
+}
+
+static int mpq7932_probe(struct i2c_client *client)
+{
+ struct mpq7932_data *data;
+ struct pmbus_driver_info *info;
+ struct device *dev = &client->dev;
+ int i;
+
+ if (!i2c_check_functionality(client->adapter,
+ I2C_FUNC_SMBUS_READ_WORD_DATA))
+ return -ENODEV;
+
+ data = devm_kzalloc(&client->dev, sizeof(struct mpq7932_data),
+ GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ info = &data->info;
+ info->pages = MPQ7932_NUM_PAGES;
+ info->num_regulators = ARRAY_SIZE(mpq7932_regulators_desc);
+ info->reg_desc = mpq7932_regulators_desc;
+ info->format[PSC_VOLTAGE_OUT] = direct;
+ info->m[PSC_VOLTAGE_OUT] = 160;
+ info->b[PSC_VOLTAGE_OUT] = -33;
+ for (i = 0; i < info->pages; i++) {
+ info->func[i] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+ | PMBUS_HAVE_STATUS_TEMP;
+ }
+
+ info->read_word_data = mpq7932_read_word_data;
+ info->write_word_data = mpq7932_write_word_data;
+
+ data->pdata.flags = PMBUS_NO_CAPABILITY;
+ dev->platform_data = &data->pdata;
+
+ return pmbus_do_probe(client, info);
+}
+
+static const struct of_device_id mpq7932_of_match[] = {
+ { .compatible = "mps,mpq7932"},
+ {},
+};
+MODULE_DEVICE_TABLE(of, mpq7932_of_match);
+
+static const struct i2c_device_id mpq7932_id[] = {
+ { "mpq7932", },
+ { },
+};
+MODULE_DEVICE_TABLE(i2c, mpq7932_id);
+
+static struct i2c_driver mpq7932_regulator_driver = {
+ .driver = {
+ .name = "mpq7932",
+ .of_match_table = mpq7932_of_match,
+ },
+ .probe_new = mpq7932_probe,
+ .id_table = mpq7932_id,
+};
+module_i2c_driver(mpq7932_regulator_driver);
+
+MODULE_AUTHOR("Saravanan Sekar <saravanan@xxxxxxxxxxx>");
+MODULE_DESCRIPTION("MPQ7932 PMIC regulator driver");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(PMBUS);
--
2.34.1
