Add PMBus status byte to regulator flag map.
Signed-off-by: Naresh Solanki <Naresh.Solanki@xxxxxxxxxxxxx>
---
Changes:
- Remove status input
- Add comment for PMBUS status byte.
---
drivers/hwmon/pmbus/pmbus_core.c | 20 +++++++++++---------
1 file changed, 11 insertions(+), 9 deletions(-)
diff --git a/drivers/hwmon/pmbus/pmbus_core.c b/drivers/hwmon/pmbus/pmbus_core.c
index 95e95783972a..a7b4ae0f1f3b 100644
--- a/drivers/hwmon/pmbus/pmbus_core.c
+++ b/drivers/hwmon/pmbus/pmbus_core.c
@@ -2751,7 +2751,16 @@ struct pmbus_regulator_status_category {
};
static const struct pmbus_regulator_status_category pmbus_regulator_flag_map[] = {
- {
+ { /* STATUS byte is always present. */
+ .func = -1,
+ .reg = PMBUS_STATUS_BYTE,
+ .bits = (const struct pmbus_regulator_status_assoc[]) {
+ { PB_STATUS_IOUT_OC, REGULATOR_ERROR_OVER_CURRENT },
+ { PB_STATUS_VOUT_OV, REGULATOR_ERROR_REGULATION_OUT },
+ { PB_STATUS_VIN_UV, REGULATOR_ERROR_UNDER_VOLTAGE },
+ { },
+ },
+ }, {
.func = PMBUS_HAVE_STATUS_VOUT,
.reg = PMBUS_STATUS_VOUT,
.bits = (const struct pmbus_regulator_status_assoc[]) {
@@ -2768,6 +2777,7 @@ static const struct pmbus_regulator_status_category pmbus_regulator_flag_map[] =
{ PB_IOUT_OC_WARNING, REGULATOR_ERROR_OVER_CURRENT_WARN },
{ PB_IOUT_OC_FAULT, REGULATOR_ERROR_OVER_CURRENT },
{ PB_IOUT_OC_LV_FAULT, REGULATOR_ERROR_OVER_CURRENT },
+ { PB_POUT_OP_FAULT, REGULATOR_ERROR_FAIL },
{ },
},
}, {
@@ -2834,14 +2844,6 @@ static int pmbus_regulator_get_error_flags(struct regulator_dev *rdev, unsigned
if (status & PB_STATUS_POWER_GOOD_N)
*flags |= REGULATOR_ERROR_REGULATION_OUT;
}
- /*
- * Unlike most other status bits, PB_STATUS_{IOUT_OC,VOUT_OV} are
- * defined strictly as fault indicators (not warnings).
- */
- if (status & PB_STATUS_IOUT_OC)
- *flags |= REGULATOR_ERROR_OVER_CURRENT;
- if (status & PB_STATUS_VOUT_OV)
- *flags |= REGULATOR_ERROR_REGULATION_OUT;
/*
* If we haven't discovered any thermal faults or warnings via
base-commit: 9494c53e1389b120ba461899207ac8a3aab2632c
--
2.37.3
