On Thursday 30 October 2014 11:12:12 flora.fu@xxxxxxxxxxxx wrote:
> +
> +example:
> + infrarst: reset-controller@10001030 {
> + #reset-cells = <1>;
> + compatible = "mediatek,mt8135-infracfg-reset", "mediatek,reset";
> + mediatek,syscon-reset = <&infracfg 0x30 0x8>;
> + };
I think you need to change the 'unit-address' now, i.e. the @10001030
value above no longer matches any reg property. You could just
remove that part.
> +Specifying reset lines connected to IP modules
> +==============================================
> +
> +The reset controller(mtk-reset) manages various reset sources. Those device nodes should
> +specify the reset line on the rstc in their resets property, containing a phandle to the
> +rstc device node and a RESET_INDEX specifying which module to reset, as described in
> +reset.txt.
> +
> +For MediaTek SoC, RESET_INDEX is reset bit defined in INFRACFG or PERICFG registers.
> +
> +example:
> +pwrap: pwrap@1000f000 {
> + compatible = "mediatek,mt8135-pwrap";
> + reg = <0 0x1000f000 0 0x1000>,
> + <0 0x11017000 0 0x1000>;
> + reg-names = "pwrap-base",
> + "pwrap-bridge-base";
> + resets = <&infrarst 7>, <&perirst 34>;
> + reset-names = "infrarst", "perirst";
> + };
> +};
>
You have an extraneous '};' here.
Arnd
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
