Re: [PATCH v4] dt-bindings: leds: Document commonly used LED triggers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Nov 29, 2022 at 11:49 AM Manivannan Sadhasivam
<manivannan.sadhasivam@xxxxxxxxxx> wrote:
>
> Document the commonly used LED triggers by the SoCs. Not all triggers
> are documented as some of them are very application specific. Most of the
> triggers documented here are currently used in devicetrees of many SoCs.
>
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
> ---
>
> Changes in v4:
>
> * Removed the sorting of triggers
> * Removed the "items" as they were not needed
> * Reworded the description
> * Dropped Zhen Lei's tested-by tag as the patch has changed
> * Added kbd-capslock trigger
>
> Changes in v3:
>
> * Rebased on top of v6.1-rc1
> * Added WLAN Rx trigger
> * Added tested tag from Zhen Lei
>
> Changes in v2:
>
> * Added more triggers, fixed the regex
> * Sorted triggers in ascending order
>
>  .../devicetree/bindings/leds/common.yaml      | 40 ++++++++++++++++++-
>  1 file changed, 38 insertions(+), 2 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/leds/common.yaml b/Documentation/devicetree/bindings/leds/common.yaml
> index 3c14a98430e1..68da651f29a8 100644
> --- a/Documentation/devicetree/bindings/leds/common.yaml
> +++ b/Documentation/devicetree/bindings/leds/common.yaml
> @@ -98,8 +98,44 @@ properties:
>              # LED alters the brightness for the specified duration with one software
>              # timer (requires "led-pattern" property)
>            - pattern
> -        # LED is triggered by SD/MMC activity
> -      - pattern: "^mmc[0-9]+$"
> +            # LED indicates mic mute state
> +          - audio-micmute
> +            # LED indicates audio mute state
> +          - audio-mute
> +            # LED indicates bluetooth power state
> +          - bluetooth-power
> +            # LED indicates activity of all CPUs
> +          - cpu
> +            # LED indicates disk read activity
> +          - disk-read
> +            # LED indicates disk write activity
> +          - disk-write
> +            # LED indicates camera flash state
> +          - flash
> +            # LED indicated keyboard capslock
> +          - kbd-capslock
> +            # LED indicates MTD memory activity
> +          - mtd
> +            # LED indicates NAND memory activity (deprecated),
> +            # in new implementations use "mtd"
> +          - nand-disk
> +            # No trigger assigned to the LED. This is the default mode
> +            # if trigger is absent
> +          - none
> +            # LED indicates camera torch state
> +          - torch
> +            # LED indicates USB gadget activity
> +          - usb-gadget
> +            # LED indicates USB host activity
> +          - usb-host
> +        # LED indicates [N]th MMC storage activity
> +      - pattern: "^mmc[0-9]{1,2}$"
> +        # LED indicates activity of [N]th CPU
> +      - pattern: "^cpu[0-9]{1,2}$"

This will conflict with Pawel's tree because I already added this.
Mine covers 'cpu' and my 100 core system with 100 cpu leds. ;)

> +        # LED indicates power status of [N]th Bluetooth HCI device
> +      - pattern: "^hci[0-9]{1,2}-power$"
> +        # LED indicates [N]th WLAN Tx/Rx activity
> +      - pattern: "^phy[0-9]{1,2}(tx|rx)$"

And these are pending from Geert[1].

Rob

[1] https://lore.kernel.org/all/a85c256af01f64389a078c2b37c3b72a27d97536.1668005062.git.geert+renesas@xxxxxxxxx/



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux