Add common fan properties bindings to a schema.
Bindings for fan controllers can reference the common schema for the
fan
child nodes:
patternProperties:
"^fan@[0-2]":
type: object
$ref: fan-common.yaml#
Signed-off-by: Naresh Solanki <Naresh.Solanki@xxxxxxxxxxxxx>
---
.../devicetree/bindings/hwmon/fan-common.yaml | 48 +++++++++++++++++++
1 file changed, 48 insertions(+)
create mode 100644 Documentation/devicetree/bindings/hwmon/fan-common.yaml
diff --git a/Documentation/devicetree/bindings/hwmon/fan-common.yaml b/Documentation/devicetree/bindings/hwmon/fan-common.yaml
new file mode 100644
index 000000000000..330fb1552821
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/fan-common.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: GPL-2.0-or-later OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/fan-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common Fan Properties
+
+maintainers:
+ - Naresh Solanki <naresh.solanki@xxxxxxxxxxxxx>
+
+properties:
+ max-rpm:
+ description:
+ Max RPM supported by fan.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ min-rpm:
+ description:
+ Min RPM supported by fan.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ pulses-per-revolution:
+ description:
+ The number of pulse from fan sensor per revolution.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ target-rpm:
+ description:
+ Target RPM the fan should be configured during driver probe.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ pwms:
+ maxItems: 1
+ description:
+ PWM signal for the fan
+
+ label:
+ description:
+ Optional fan label
+
+ fan-supply:
+ description:
+ Power supply for fan.
+
+additionalProperties: true
+
+...
--
2.37.3
