On Tue, 29 Nov 2022 19:35:05 +0900, Kunihiko Hayashi wrote: > Add devicetree binding schema for the media I/O block implemented on > Socionext Uniphier SoCs. This block is implemented on LD4, sLD8, Pro4, > and LD11 SoCs. > > Media I/O block implemented on Socionext UniPhier SoCs is an integrated > component of the stream type peripherals including SD, USB2.0, eMMC, > and MIO-DMAC. > > Media I/O block has a common logic to control the component. > > Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@xxxxxxxxxxxxx> > --- > .../socionext/socionext,uniphier-mioctrl.yaml | 67 +++++++++++++++++++ > 1 file changed, 67 insertions(+) > create mode 100644 Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-mioctrl.yaml > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/reset/socionext,uniphier-reset.example.dtb: mioctrl@59810000: 'reset' does not match any of the regexes: '^clock-controller(@[0-9a-f]+)?$', '^reset-controller(@[0-9a-f]+)?$', 'pinctrl-[0-9]+' From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-mioctrl.yaml /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/clock/socionext,uniphier-clock.example.dtb: mioctrl@59810000: 'clock' does not match any of the regexes: '^clock-controller(@[0-9a-f]+)?$', '^reset-controller(@[0-9a-f]+)?$', 'pinctrl-[0-9]+' From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-mioctrl.yaml doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20221129103509.9958-5-hayashi.kunihiko@xxxxxxxxxxxxx This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command.
