Re: [PATCH v3 2/2] dt: bindings: tps65217: add compatible property for backlight subnode

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




ping

2014-10-08 23:20 GMT+02:00 Johannes Pointner <johannes.pointner@xxxxxxxxx>:
> Add documentation for compatible property of backlight subnode.
>
> Signed-off-by: Johannes Pointner <johannes.pointner@xxxxxxxxxxxxxxxxx>
> ---
> Changes since v2:
> 1. Removed the pmic part of the patch.
> 2. Added newline before subnode in the example.
> ---
>  .../devicetree/bindings/video/backlight/tps65217-backlight.txt | 10 +++++++---
>  1 file changed, 7 insertions(+), 3 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/video/backlight/tps65217-backlight.txt b/Documentation/devicetree/bindings/video/backlight/tps65217-backlight.txt
> index 5fb9279..63ef699 100644
> --- a/Documentation/devicetree/bindings/video/backlight/tps65217-backlight.txt
> +++ b/Documentation/devicetree/bindings/video/backlight/tps65217-backlight.txt
> @@ -6,19 +6,23 @@ used to drive LEDs for use as backlights.
>  Required properties:
>  - compatible: "ti,tps65217"
>  - reg: I2C slave address
> -- backlight: node for specifying WLED1 and WLED2 lines in TPS65217
> +- backlight: subnode for specifying WLED1 and WLED2 lines in TPS65217
> +
> +Required subnode properties:
> +- compatible: "ti,tps65217-bl"
>  - isel: selection bit, valid values: 1 for ISEL1 (low-level) and 2 for ISEL2 (high-level)
>  - fdim: PWM dimming frequency, valid values: 100, 200, 500, 1000
>  - default-brightness: valid values: 0-100
>
> -Each regulator is defined using the standard binding for regulators.
>
>  Example:
>
>         tps: tps@24 {
>                 reg = <0x24>;
>                 compatible = "ti,tps65217";
> -               backlight {
> +
> +               tps_bl: backlight {
> +                       compatible = "ti,tps65217-bl";
>                         isel = <1>;  /* 1 - ISET1, 2 ISET2 */
>                         fdim = <100>; /* TPS65217_BL_FDIM_100HZ */
>                         default-brightness = <50>;
> --
> 2.1.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux