Re: [PATCH] arm64: dts: qcom: msm8916-wingtech-wt88047: Add flash LED

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 28/11/2022 19:30, Stephan Gerhold wrote:
> Hi Krzysztof,
> 
> On Mon, Nov 28, 2022 at 09:56:47AM +0100, Krzysztof Kozlowski wrote:
>> On 28/11/2022 06:16, Lin, Meng-Bo wrote:
>>> WT88047 uses OCP 8110 Flash LED driver. Add it to the device tree.
>>>
>>> Signed-off-by: Lin, Meng-Bo <linmengbo0689@xxxxxxxxxxxxxx>
>>> ---
>>>  .../dts/qcom/msm8916-wingtech-wt88047.dts     | 22 +++++++++++++++++++
>>>  1 file changed, 22 insertions(+)
>>>
>>> diff --git a/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts b/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts
>>> index 166bed05996f..a87be1d95b14 100644
>>> --- a/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts
>>> +++ b/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts
>>> @@ -23,6 +23,20 @@ chosen {
>>>  		stdout-path = "serial0";
>>>  	};
>>>  
>>> +	flash-led-controller {
>>> +		compatible = "ocs,ocp8110";
>>
>> The compatible is not documented. Checkpatch warns about it. You need to
>> document devices before using them.
>>
> 
> Unfortunately Pavel never applied the dt-bindings patch for this - only
> the driver patch was applied. André already sent a kind reminder [1] and
> two resends [2, 3] without success. Since it's a documentation-only
> patch, maybe you could take it through the dt-bindings tree?
> 

I'll ping Rob. Other way is to resend. You need to keep resending (maybe
together with DTS in such case) before this can go in.

Best regards,
Krzysztof




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux