Re: [PATCH v3 02/10] arm64: dts: qcom: Add base SM8550 dtsi

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 26.11.2022 12:46, Abel Vesa wrote:
> Add base dtsi for SM8550 SoC and includes base description of
> CPUs, GCC, RPMHCC, UART, interrupt controller, TLMM, reserved
> memory, RPMh PD, TCSRCC, ITS, IPCC, AOSS QMP, LLCC, cpufreq,
> interconnect, thermal sensor, cpu cooling maps and SMMU nodes
> which helps boot to shell with console on boards with this SoC.
> 
> Co-developed-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
> Signed-off-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
> Signed-off-by: Abel Vesa <abel.vesa@xxxxxxxxxx>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>

Konrad
> 
> Changes since v2:
>  * changed 4th interrupt for the timer to 10, like Sai suggested
>  * moved the ranges for the reserved_memory in the proper place
>  * added bus-width and dma-coherent to the sdhc_2
>  * replaced 0x0 with 0 in all reg properties, as per Konrad's suggestion
>  * inserted new line between bwmon opp nodes
> 
>  arch/arm64/boot/dts/qcom/sm8550.dtsi | 3536 ++++++++++++++++++++++++++
>  1 file changed, 3536 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/qcom/sm8550.dtsi
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi
> new file mode 100644
> index 000000000000..dce70739f41d
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi
> @@ -0,0 +1,3536 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) 2022, Linaro Limited
> + */
> +
> +#include <dt-bindings/clock/qcom,rpmh.h>
> +#include <dt-bindings/clock/qcom,sm8550-gcc.h>
> +#include <dt-bindings/clock/qcom,sm8550-tcsrcc.h>
> +#include <dt-bindings/dma/qcom-gpi.h>
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/interconnect/qcom,sm8550.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/mailbox/qcom-ipcc.h>
> +#include <dt-bindings/power/qcom-rpmpd.h>
> +#include <dt-bindings/soc/qcom,rpmh-rsc.h>
> +#include <dt-bindings/thermal/thermal.h>
> +
> +/ {
> +	interrupt-parent = <&intc>;
> +
> +	#address-cells = <2>;
> +	#size-cells = <2>;
> +
> +	chosen { };
> +
> +	clocks {
> +		xo_board: xo-board {
> +			compatible = "fixed-clock";
> +			#clock-cells = <0>;
> +		};
> +
> +		sleep_clk: sleep-clk {
> +			compatible = "fixed-clock";
> +			#clock-cells = <0>;
> +		};
> +	};
> +
> +	cpus {
> +		#address-cells = <2>;
> +		#size-cells = <0>;
> +
> +		CPU0: cpu@0 {
> +			device_type = "cpu";
> +			compatible = "qcom,kryo";
> +			reg = <0 0>;
> +			enable-method = "psci";
> +			next-level-cache = <&L2_0>;
> +			power-domains = <&CPU_PD0>;
> +			power-domain-names = "psci";
> +			qcom,freq-domain = <&cpufreq_hw 0>;
> +			capacity-dmips-mhz = <1024>;
> +			dynamic-power-coefficient = <100>;
> +			#cooling-cells = <2>;
> +			L2_0: l2-cache {
> +			      compatible = "cache";
> +			      next-level-cache = <&L3_0>;
> +				L3_0: l3-cache {
> +					compatible = "cache";
> +				};
> +			};
> +		};
> +
> +		CPU1: cpu@100 {
> +			device_type = "cpu";
> +			compatible = "qcom,kryo";
> +			reg = <0 0x100>;
> +			enable-method = "psci";
> +			next-level-cache = <&L2_100>;
> +			power-domains = <&CPU_PD1>;
> +			power-domain-names = "psci";
> +			qcom,freq-domain = <&cpufreq_hw 0>;
> +			capacity-dmips-mhz = <1024>;
> +			dynamic-power-coefficient = <100>;
> +			#cooling-cells = <2>;
> +			L2_100: l2-cache {
> +			      compatible = "cache";
> +			      next-level-cache = <&L3_0>;
> +			};
> +		};
> +
> +		CPU2: cpu@200 {
> +			device_type = "cpu";
> +			compatible = "qcom,kryo";
> +			reg = <0 0x200>;
> +			enable-method = "psci";
> +			next-level-cache = <&L2_200>;
> +			power-domains = <&CPU_PD2>;
> +			power-domain-names = "psci";
> +			qcom,freq-domain = <&cpufreq_hw 0>;
> +			capacity-dmips-mhz = <1024>;
> +			dynamic-power-coefficient = <100>;
> +			#cooling-cells = <2>;
> +			L2_200: l2-cache {
> +			      compatible = "cache";
> +			      next-level-cache = <&L3_0>;
> +			};
> +		};
> +
> +		CPU3: cpu@300 {
> +			device_type = "cpu";
> +			compatible = "qcom,kryo";
> +			reg = <0 0x300>;
> +			enable-method = "psci";
> +			next-level-cache = <&L2_300>;
> +			power-domains = <&CPU_PD3>;
> +			power-domain-names = "psci";
> +			qcom,freq-domain = <&cpufreq_hw 1>;
> +			capacity-dmips-mhz = <1792>;
> +			dynamic-power-coefficient = <270>;
> +			#cooling-cells = <2>;
> +			L2_300: l2-cache {
> +			      compatible = "cache";
> +			      next-level-cache = <&L3_0>;
> +			};
> +		};
> +
> +		CPU4: cpu@400 {
> +			device_type = "cpu";
> +			compatible = "qcom,kryo";
> +			reg = <0 0x400>;
> +			enable-method = "psci";
> +			next-level-cache = <&L2_400>;
> +			power-domains = <&CPU_PD4>;
> +			power-domain-names = "psci";
> +			qcom,freq-domain = <&cpufreq_hw 1>;
> +			capacity-dmips-mhz = <1792>;
> +			dynamic-power-coefficient = <270>;
> +			#cooling-cells = <2>;
> +			L2_400: l2-cache {
> +			      compatible = "cache";
> +			      next-level-cache = <&L3_0>;
> +			};
> +		};
> +
> +		CPU5: cpu@500 {
> +			device_type = "cpu";
> +			compatible = "qcom,kryo";
> +			reg = <0 0x500>;
> +			enable-method = "psci";
> +			next-level-cache = <&L2_500>;
> +			power-domains = <&CPU_PD5>;
> +			power-domain-names = "psci";
> +			qcom,freq-domain = <&cpufreq_hw 1>;
> +			capacity-dmips-mhz = <1792>;
> +			dynamic-power-coefficient = <270>;
> +			#cooling-cells = <2>;
> +			L2_500: l2-cache {
> +			      compatible = "cache";
> +			      next-level-cache = <&L3_0>;
> +			};
> +		};
> +
> +		CPU6: cpu@600 {
> +			device_type = "cpu";
> +			compatible = "qcom,kryo";
> +			reg = <0 0x600>;
> +			enable-method = "psci";
> +			next-level-cache = <&L2_600>;
> +			power-domains = <&CPU_PD6>;
> +			power-domain-names = "psci";
> +			qcom,freq-domain = <&cpufreq_hw 1>;
> +			capacity-dmips-mhz = <1792>;
> +			dynamic-power-coefficient = <270>;
> +			#cooling-cells = <2>;
> +			L2_600: l2-cache {
> +			      compatible = "cache";
> +			      next-level-cache = <&L3_0>;
> +			};
> +		};
> +
> +		CPU7: cpu@700 {
> +			device_type = "cpu";
> +			compatible = "qcom,kryo";
> +			reg = <0 0x700>;
> +			enable-method = "psci";
> +			next-level-cache = <&L2_700>;
> +			power-domains = <&CPU_PD7>;
> +			power-domain-names = "psci";
> +			qcom,freq-domain = <&cpufreq_hw 2>;
> +			capacity-dmips-mhz = <1894>;
> +			dynamic-power-coefficient = <588>;
> +			#cooling-cells = <2>;
> +			L2_700: l2-cache {
> +			      compatible = "cache";
> +			      next-level-cache = <&L3_0>;
> +			};
> +		};
> +
> +		cpu-map {
> +			cluster0 {
> +				core0 {
> +					cpu = <&CPU0>;
> +				};
> +
> +				core1 {
> +					cpu = <&CPU1>;
> +				};
> +
> +				core2 {
> +					cpu = <&CPU2>;
> +				};
> +
> +				core3 {
> +					cpu = <&CPU3>;
> +				};
> +
> +				core4 {
> +					cpu = <&CPU4>;
> +				};
> +
> +				core5 {
> +					cpu = <&CPU5>;
> +				};
> +
> +				core6 {
> +					cpu = <&CPU6>;
> +				};
> +
> +				core7 {
> +					cpu = <&CPU7>;
> +				};
> +			};
> +		};
> +
> +		idle-states {
> +			entry-method = "psci";
> +
> +			LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
> +				compatible = "arm,idle-state";
> +				idle-state-name = "silver-rail-power-collapse";
> +				arm,psci-suspend-param = <0x40000004>;
> +				entry-latency-us = <800>;
> +				exit-latency-us = <750>;
> +				min-residency-us = <4090>;
> +				local-timer-stop;
> +			};
> +
> +			BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
> +				compatible = "arm,idle-state";
> +				idle-state-name = "gold-rail-power-collapse";
> +				arm,psci-suspend-param = <0x40000004>;
> +				entry-latency-us = <600>;
> +				exit-latency-us = <1550>;
> +				min-residency-us = <4791>;
> +				local-timer-stop;
> +			};
> +		};
> +
> +		domain-idle-states {
> +			CLUSTER_SLEEP_0: cluster-sleep-0 {
> +				compatible = "domain-idle-state";
> +				arm,psci-suspend-param = <0x41000044>;
> +				entry-latency-us = <1050>;
> +				exit-latency-us = <2500>;
> +				min-residency-us = <5309>;
> +			};
> +
> +			CLUSTER_SLEEP_1: cluster-sleep-1 {
> +				compatible = "domain-idle-state";
> +				arm,psci-suspend-param = <0x4100c344>;
> +				entry-latency-us = <2700>;
> +				exit-latency-us = <3500>;
> +				min-residency-us = <13959>;
> +			};
> +		};
> +	};
> +
> +	firmware {
> +		scm: scm {
> +			compatible = "qcom,scm-sm8550", "qcom,scm";
> +		};
> +	};
> +
> +	clk_virt: interconnect-0 {
> +		compatible = "qcom,sm8550-clk-virt";
> +		#interconnect-cells = <2>;
> +		qcom,bcm-voters = <&apps_bcm_voter>;
> +	};
> +
> +	mc_virt: interconnect-1 {
> +		compatible = "qcom,sm8550-mc-virt";
> +		#interconnect-cells = <2>;
> +		qcom,bcm-voters = <&apps_bcm_voter>;
> +	};
> +
> +	memory@a0000000 {
> +		device_type = "memory";
> +		/* We expect the bootloader to fill in the size */
> +		reg = <0 0xa0000000 0 0>;
> +	};
> +
> +	pmu {
> +		compatible = "arm,armv8-pmuv3";
> +		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
> +	};
> +
> +	psci {
> +		compatible = "arm,psci-1.0";
> +		method = "smc";
> +
> +		CPU_PD0: power-domain-cpu0 {
> +			#power-domain-cells = <0>;
> +			power-domains = <&CLUSTER_PD>;
> +			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
> +		};
> +
> +		CPU_PD1: power-domain-cpu1 {
> +			#power-domain-cells = <0>;
> +			power-domains = <&CLUSTER_PD>;
> +			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
> +		};
> +
> +		CPU_PD2: power-domain-cpu2 {
> +			#power-domain-cells = <0>;
> +			power-domains = <&CLUSTER_PD>;
> +			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
> +		};
> +
> +		CPU_PD3: power-domain-cpu3 {
> +			#power-domain-cells = <0>;
> +			power-domains = <&CLUSTER_PD>;
> +			domain-idle-states = <&BIG_CPU_SLEEP_0>;
> +		};
> +
> +		CPU_PD4: power-domain-cpu4 {
> +			#power-domain-cells = <0>;
> +			power-domains = <&CLUSTER_PD>;
> +			domain-idle-states = <&BIG_CPU_SLEEP_0>;
> +		};
> +
> +		CPU_PD5: power-domain-cpu5 {
> +			#power-domain-cells = <0>;
> +			power-domains = <&CLUSTER_PD>;
> +			domain-idle-states = <&BIG_CPU_SLEEP_0>;
> +		};
> +
> +		CPU_PD6: power-domain-cpu6 {
> +			#power-domain-cells = <0>;
> +			power-domains = <&CLUSTER_PD>;
> +			domain-idle-states = <&BIG_CPU_SLEEP_0>;
> +		};
> +
> +		CPU_PD7: power-domain-cpu7 {
> +			#power-domain-cells = <0>;
> +			power-domains = <&CLUSTER_PD>;
> +			domain-idle-states = <&BIG_CPU_SLEEP_0>;
> +		};
> +
> +		CLUSTER_PD: power-domain-cluster {
> +			#power-domain-cells = <0>;
> +			domain-idle-states = <&CLUSTER_SLEEP_0>, <&CLUSTER_SLEEP_1>;
> +		};
> +	};
> +
> +	reserved_memory: reserved-memory {
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		ranges;
> +
> +		hyp_mem: hyp-region@80000000 {
> +			reg = <0 0x80000000 0 0xa00000>;
> +			no-map;
> +		};
> +
> +		cpusys_vm_mem: cpusys-vm-region@80a00000 {
> +			reg = <0 0x80a00000 0 0x400000>;
> +			no-map;
> +		};
> +
> +		hyp_tags_mem: hyp-tags-region@80e00000 {
> +			reg = <0 0x80e00000 0 0x3d0000>;
> +			no-map;
> +		};
> +
> +		xbl_sc_mem: xbl-sc-region@d8100000 {
> +			reg = <0 0xd8100000 0 0x40000>;
> +			no-map;
> +		};
> +
> +
> +		hyp_tags_reserved_mem: hyp-tags-reserved-region@811d0000 {
> +			reg = <0 0x811d0000 0 0x30000>;
> +			no-map;
> +		};
> +
> +		/* merged xbl_dt_log, xbl_ramdump, aop_image */
> +		xbl_dt_log_merged_mem: xbl-dt-log-merged-region@81a00000 {
> +			reg = <0 0x81a00000 0 0x260000>;
> +			no-map;
> +		};
> +
> +		aop_cmd_db_mem: aop-cmd-db-region@81c60000 {
> +			compatible = "qcom,cmd-db";
> +			reg = <0 0x81c60000 0 0x20000>;
> +			no-map;
> +		};
> +
> +		/* merged aop_config, tme_crash_dump, tme_log, uefi_log */
> +		aop_config_merged_mem: aop-config-merged-region@81c80000 {
> +			reg = <0 0x81c80000 0 0x74000>;
> +			no-map;
> +		};
> +
> +		/* secdata region can be reused by apps */
> +		smem: smem@81d00000 {
> +			compatible = "qcom,smem";
> +			reg = <0 0x81d00000 0 0x200000>;
> +			hwlocks = <&tcsr_mutex 3>;
> +			no-map;
> +		};
> +
> +		adsp_mhi_mem: adsp-mhi-region@81f00000 {
> +			reg = <0 0x81f00000 0 0x20000>;
> +			no-map;
> +		};
> +
> +		global_sync_mem: global-sync-region@82600000 {
> +			reg = <0 0x82600000 0 0x100000>;
> +			no-map;
> +		};
> +
> +		tz_stat_mem: tz-stat-region@82700000 {
> +			reg = <0 0x82700000 0 0x100000>;
> +			no-map;
> +		};
> +
> +		cdsp_secure_heap_mem: cdsp-secure-heap-region@82800000 {
> +			reg = <0 0x82800000 0 0x4600000>;
> +			no-map;
> +		};
> +
> +		mpss_mem: mpss-region@8a800000 {
> +			reg = <0 0x8a800000 0 0x10800000>;
> +			no-map;
> +		};
> +
> +		q6_mpss_dtb_mem: q6-mpss-dtb-region@9b000000 {
> +			reg = <0 0x9b000000 0 0x80000>;
> +			no-map;
> +		};
> +
> +		ipa_fw_mem: ipa-fw-region@9b080000 {
> +			reg = <0 0x9b080000 0 0x10000>;
> +			no-map;
> +		};
> +
> +		ipa_gsi_mem: ipa-gsi-region@9b090000 {
> +			reg = <0 0x9b090000 0 0xa000>;
> +			no-map;
> +		};
> +
> +		gpu_micro_code_mem: gpu-micro-code-region@9b09a000 {
> +			reg = <0 0x9b09a000 0 0x2000>;
> +			no-map;
> +		};
> +
> +		spss_region_mem: spss-region@9b100000 {
> +			reg = <0 0x9b100000 0 0x180000>;
> +			no-map;
> +		};
> +
> +		/* First part of the "SPU secure shared memory" region */
> +		spu_tz_shared_mem: spu-tz-shared-region@9b280000 {
> +			reg = <0 0x9b280000 0 0x60000>;
> +			no-map;
> +		};
> +
> +		/* Second part of the "SPU secure shared memory" region */
> +		spu_modem_shared_mem: spu-modem-shared-region@9b2e0000 {
> +			reg = <0 0x9b2e0000 0 0x20000>;
> +			no-map;
> +		};
> +
> +		camera_mem: camera-region@9b300000 {
> +			reg = <0 0x9b300000 0 0x800000>;
> +			no-map;
> +		};
> +
> +		video_mem: video-region@9bb00000 {
> +			reg = <0 0x9bb00000 0 0x700000>;
> +			no-map;
> +		};
> +
> +		cvp_mem: cvp-region@9c200000 {
> +			reg = <0 0x9c200000 0 0x700000>;
> +			no-map;
> +		};
> +
> +		cdsp_mem: cdsp-region@9c900000 {
> +			reg = <0 0x9c900000 0 0x2000000>;
> +			no-map;
> +		};
> +
> +		q6_cdsp_dtb_mem: q6-cdsp-dtb-region@9e900000 {
> +			reg = <0 0x9e900000 0 0x80000>;
> +			no-map;
> +		};
> +
> +		q6_adsp_dtb_mem: q6-adsp-dtb-region@9e980000 {
> +			reg = <0 0x9e980000 0 0x80000>;
> +			no-map;
> +		};
> +
> +		adspslpi_mem: adspslpi-region@9ea00000 {
> +			reg = <0 0x9ea00000 0 0x4080000>;
> +			no-map;
> +		};
> +
> +		/* uefi region can be reused by apps */
> +
> +		/* Linux kernel image is loaded at 0xa8000000 */
> +
> +		mpss_dsm_mem: mpss-dsm-region@d4d00000 {
> +			compatible = "qcom,mpss-dsm-mem";
> +			reg = <0 0xd4d00000 0 0x3300000>;
> +			no-map;
> +		};
> +
> +		tz_reserved_mem: tz-reserved-region@d8000000 {
> +			reg = <0 0xd8000000 0 0x100000>;
> +			no-map;
> +		};
> +
> +		cpucp_fw_mem: cpucp-fw-region@d8140000 {
> +			reg = <0 0xd8140000 0 0x1c0000>;
> +			no-map;
> +		};
> +
> +		qtee_mem: qtee-region@d8300000 {
> +			reg = <0 0xd8300000 0 0x500000>;
> +			no-map;
> +		};
> +
> +		ta_mem: ta-region@d8800000 {
> +			reg = <0 0xd8800000 0 0x8a00000>;
> +			no-map;
> +		};
> +
> +		tz_tags_mem: tz-tags-region@e1200000 {
> +			reg = <0 0xe1200000 0 0x2740000>;
> +			no-map;
> +		};
> +
> +		hwfence_shbuf: hwfence-shbuf-region@e6440000 {
> +			reg = <0 0xe6440000 0 0x279000>;
> +			no-map;
> +		};
> +
> +		trust_ui_vm_mem: trust-ui-vm-region@f3600000 {
> +			reg = <0 0xf3600000 0 0x4aee000>;
> +			no-map;
> +		};
> +
> +		trust_ui_vm_dump: trust-ui-vm-dump-region@f80ee000 {
> +			reg = <0 0xf80ee000 0 0x1000>;
> +			no-map;
> +		};
> +
> +		trust_ui_vm_qrtr: trust-ui-vm-qrt-region@f80ef000 {
> +			reg = <0 0xf80ef000 0 0x9000>;
> +			no-map;
> +		};
> +
> +		trust_ui_vm_vblk0_ring: trust-ui-vm-vblk0-ring-region@f80f8000 {
> +			reg = <0 0xf80f8000 0 0x4000>;
> +			no-map;
> +		};
> +
> +		trust_ui_vm_vblk1_ring: trust-ui-vm-vblk1-ring-region@f80fc000 {
> +			reg = <0 0xf80fc000 0 0x4000>;
> +			no-map;
> +		};
> +
> +		trust_ui_vm_swiotlb: trust-ui-vm-swiotlb-region@f8100000 {
> +			reg = <0 0xf8100000 0 0x100000>;
> +			no-map;
> +		};
> +
> +		oem_vm_mem: oem-vm-region@f8400000 {
> +			reg = <0 0xf8400000 0 0x4800000>;
> +			no-map;
> +		};
> +
> +		oem_vm_vblk0_ring: oem-vm-vblk0-ring-region@fcc00000 {
> +			reg = <0 0xfcc00000 0 0x4000>;
> +			no-map;
> +		};
> +
> +		oem_vm_swiotlb: oem-vm-swiotlb-region@fcc04000 {
> +			reg = <0 0xfcc04000 0 0x100000>;
> +			no-map;
> +		};
> +
> +		hyp_ext_tags_mem: hyp-ext-tags-region@fce00000 {
> +			reg = <0 0xfce00000 0 0x2900000>;
> +			no-map;
> +		};
> +
> +		hyp_ext_reserved_mem: hyp-ext-reserved-region@ff700000 {
> +			reg = <0 0xff700000 0 0x100000>;
> +			no-map;
> +		};
> +	};
> +
> +	soc: soc@0 {
> +		compatible = "simple-bus";
> +		ranges = <0 0 0 0 0x10 0>;
> +		dma-ranges = <0 0 0 0 0x10 0>;
> +
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +
> +		gcc: clock-controller@100000 {
> +			compatible = "qcom,sm8550-gcc";
> +			reg = <0 00100000 0 0x1f4200>;
> +			#clock-cells = <1>;
> +			#reset-cells = <1>;
> +			#power-domain-cells = <1>;
> +			clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>,
> +				 <0>,
> +				 <0>,
> +				 <0>,
> +				 <0>,
> +				 <0>,
> +				 <0>,
> +				 <0>;
> +		};
> +
> +		ipcc: mailbox@408000 {
> +			compatible = "qcom,sm8550-ipcc", "qcom,ipcc";
> +			reg = <0 00408000 0 0x1000>;
> +			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-controller;
> +			#interrupt-cells = <3>;
> +			#mbox-cells = <2>;
> +		};
> +
> +		gpi_dma2: dma-controller@800000 {
> +			compatible = "qcom,sm8550-gpi-dma", "qcom,sm6350-gpi-dma";
> +			#dma-cells = <3>;
> +			reg = <0 00800000 0 0x60000>;
> +			interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 596 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 599 IRQ_TYPE_LEVEL_HIGH>;
> +			dma-channels = <12>;
> +			dma-channel-mask = <0x3e>;
> +			iommus = <&apps_smmu 0x436 0>;
> +			status = "disabled";
> +		};
> +
> +		qupv3_id_1: geniqup@8c0000 {
> +			compatible = "qcom,geni-se-qup";
> +			reg = <0 008c0000 0 0x2000>;
> +			ranges;
> +			clock-names = "m-ahb", "s-ahb";
> +			clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>,
> +				 <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>;
> +			iommus = <&apps_smmu 0x423 0>;
> +			#address-cells = <2>;
> +			#size-cells = <2>;
> +			status = "disabled";
> +
> +			i2c8: i2c@880000 {
> +				compatible = "qcom,geni-i2c";
> +				reg = <0 00880000 0 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_i2c8_data_clk>;
> +				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
> +						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
> +						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>,
> +				       <&gpi_dma2 1 0 QCOM_GPI_I2C>;
> +				dma-names = "tx", "rx";
> +				status = "disabled";
> +			};
> +
> +			spi8: spi@880000 {
> +				compatible = "qcom,geni-spi";
> +				reg = <0 00880000 0 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
> +				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_spi8_data_clk>, <&qup_spi8_cs>;
> +				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
> +						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
> +						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>,
> +				       <&gpi_dma2 1 0 QCOM_GPI_SPI>;
> +				dma-names = "tx", "rx";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			i2c9: i2c@884000 {
> +				compatible = "qcom,geni-i2c";
> +				reg = <0 00884000 0 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_i2c9_data_clk>;
> +				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
> +						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
> +						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>,
> +				       <&gpi_dma2 1 1 QCOM_GPI_I2C>;
> +				dma-names = "tx", "rx";
> +				status = "disabled";
> +			};
> +
> +			spi9: spi@884000 {
> +				compatible = "qcom,geni-spi";
> +				reg = <0 00884000 0 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
> +				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>;
> +				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
> +						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
> +						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>,
> +				       <&gpi_dma2 1 1 QCOM_GPI_SPI>;
> +				dma-names = "tx", "rx";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			i2c10: i2c@888000 {
> +				compatible = "qcom,geni-i2c";
> +				reg = <0 00888000 0 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_i2c10_data_clk>;
> +				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
> +						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
> +						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>,
> +				       <&gpi_dma2 1 2 QCOM_GPI_I2C>;
> +				dma-names = "tx", "rx";
> +				status = "disabled";
> +			};
> +
> +			spi10: spi@888000 {
> +				compatible = "qcom,geni-spi";
> +				reg = <0 00888000 0 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
> +				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>;
> +				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
> +						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
> +						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>,
> +				       <&gpi_dma2 1 2 QCOM_GPI_SPI>;
> +				dma-names = "tx", "rx";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			i2c11: i2c@88c000 {
> +				compatible = "qcom,geni-i2c";
> +				reg = <0 0088c000 0 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_i2c11_data_clk>;
> +				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
> +						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
> +						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>,
> +				       <&gpi_dma2 1 3 QCOM_GPI_I2C>;
> +				dma-names = "tx", "rx";
> +				status = "disabled";
> +			};
> +
> +			spi11: spi@88c000 {
> +				compatible = "qcom,geni-spi";
> +				reg = <0 0088c000 0 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
> +				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_spi11_data_clk>, <&qup_spi11_cs>;
> +				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
> +						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
> +						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>,
> +				       <&gpi_dma2 1 3 QCOM_GPI_I2C>;
> +				dma-names = "tx", "rx";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			i2c12: i2c@890000 {
> +				compatible = "qcom,geni-i2c";
> +				reg = <0 00890000 0 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_i2c12_data_clk>;
> +				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
> +						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
> +						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>,
> +				       <&gpi_dma2 1 4 QCOM_GPI_I2C>;
> +				dma-names = "tx", "rx";
> +				status = "disabled";
> +			};
> +
> +			spi12: spi@890000 {
> +				compatible = "qcom,geni-spi";
> +				reg = <0 00890000 0 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
> +				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>;
> +				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
> +						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
> +						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>,
> +				       <&gpi_dma2 1 4 QCOM_GPI_I2C>;
> +				dma-names = "tx", "rx";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			i2c13: i2c@894000 {
> +				compatible = "qcom,geni-i2c";
> +				reg = <0 00894000 0 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_i2c13_data_clk>;
> +				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
> +						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
> +						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>,
> +				       <&gpi_dma2 1 5 QCOM_GPI_I2C>;
> +				dma-names = "tx", "rx";
> +				status = "disabled";
> +			};
> +
> +			spi13: spi@894000 {
> +				compatible = "qcom,geni-spi";
> +				reg = <0 00894000 0 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
> +				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_spi13_data_clk>, <&qup_spi13_cs>;
> +				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
> +						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
> +						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>,
> +				       <&gpi_dma2 1 5 QCOM_GPI_SPI>;
> +				dma-names = "tx", "rx";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			i2c15: i2c@89c000 {
> +				compatible = "qcom,geni-i2c";
> +				reg = <0 0089c000 0 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_i2c15_data_clk>;
> +				interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
> +						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
> +						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				dmas = <&gpi_dma2 0 7 QCOM_GPI_I2C>,
> +				       <&gpi_dma2 1 7 QCOM_GPI_I2C>;
> +				dma-names = "tx", "rx";
> +				status = "disabled";
> +			};
> +
> +			spi15: spi@89c000 {
> +				compatible = "qcom,geni-spi";
> +				reg = <0 0089c000 0 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>;
> +				interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_spi15_data_clk>, <&qup_spi15_cs>;
> +				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
> +						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
> +						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				dmas = <&gpi_dma2 0 7 QCOM_GPI_SPI>,
> +				       <&gpi_dma2 1 7 QCOM_GPI_SPI>;
> +				dma-names = "tx", "rx";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +		};
> +
> +		gpi_dma1: dma-controller@a00000 {
> +			compatible = "qcom,sm8550-gpi-dma", "qcom,sm6350-gpi-dma";
> +			#dma-cells = <3>;
> +			reg = <0 00a00000 0 0x60000>;
> +			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
> +			dma-channels = <12>;
> +			dma-channel-mask = <0x1e>;
> +			iommus = <&apps_smmu 0xb6 0>;
> +			status = "disabled";
> +		};
> +
> +		qupv3_id_0: geniqup@ac0000 {
> +			compatible = "qcom,geni-se-qup";
> +			reg = <0 00ac0000 0 0x2000>;
> +			ranges;
> +			clock-names = "m-ahb", "s-ahb";
> +			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
> +				 <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
> +			iommus = <&apps_smmu 0xa3 0>;
> +			interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>;
> +			interconnect-names = "qup-core";
> +			#address-cells = <2>;
> +			#size-cells = <2>;
> +			status = "disabled";
> +
> +			i2c0: i2c@a80000 {
> +				compatible = "qcom,geni-i2c";
> +				reg = <0 00a80000 0 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_i2c0_data_clk>;
> +				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
> +						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
> +						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
> +				       <&gpi_dma1 1 0 QCOM_GPI_I2C>;
> +				dma-names = "tx", "rx";
> +				status = "disabled";
> +			};
> +
> +			spi0: spi@a80000 {
> +				compatible = "qcom,geni-spi";
> +				reg = <0 00a80000 0 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
> +				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_spi0_data_clk>, <&qup_spi0_cs>;
> +				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
> +						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
> +						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
> +				       <&gpi_dma1 1 0 QCOM_GPI_SPI>;
> +				dma-names = "tx", "rx";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			i2c1: i2c@a84000 {
> +				compatible = "qcom,geni-i2c";
> +				reg = <0 00a84000 0 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_i2c1_data_clk>;
> +				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
> +						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
> +						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
> +				       <&gpi_dma1 1 1 QCOM_GPI_I2C>;
> +				dma-names = "tx", "rx";
> +				status = "disabled";
> +			};
> +
> +			spi1: spi@a84000 {
> +				compatible = "qcom,geni-spi";
> +				reg = <0 00a84000 0 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
> +				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>;
> +				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
> +						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
> +						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>,
> +				       <&gpi_dma1 1 1 QCOM_GPI_SPI>;
> +				dma-names = "tx", "rx";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			i2c2: i2c@a88000 {
> +				compatible = "qcom,geni-i2c";
> +				reg = <0 00a88000 0 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_i2c2_data_clk>;
> +				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
> +						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
> +						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
> +				       <&gpi_dma1 1 2 QCOM_GPI_I2C>;
> +				dma-names = "tx", "rx";
> +				status = "disabled";
> +			};
> +
> +			spi2: spi@a88000 {
> +				compatible = "qcom,geni-spi";
> +				reg = <0 00a88000 0 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
> +				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>;
> +				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
> +						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
> +						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>,
> +				       <&gpi_dma1 1 2 QCOM_GPI_SPI>;
> +				dma-names = "tx", "rx";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			i2c3: i2c@a8c000 {
> +				compatible = "qcom,geni-i2c";
> +				reg = <0 00a8c000 0 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_i2c3_data_clk>;
> +				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
> +						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
> +						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
> +				       <&gpi_dma1 1 3 QCOM_GPI_I2C>;
> +				dma-names = "tx", "rx";
> +				status = "disabled";
> +			};
> +
> +			spi3: spi@a8c000 {
> +				compatible = "qcom,geni-spi";
> +				reg = <0 00a8c000 0 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
> +				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>;
> +				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
> +						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
> +						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>,
> +				       <&gpi_dma1 1 3 QCOM_GPI_SPI>;
> +				dma-names = "tx", "rx";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			i2c4: i2c@a90000 {
> +				compatible = "qcom,geni-i2c";
> +				reg = <0 00a90000 0 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_i2c4_data_clk>;
> +				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
> +						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
> +						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
> +				       <&gpi_dma1 1 4 QCOM_GPI_I2C>;
> +				dma-names = "tx", "rx";
> +				status = "disabled";
> +			};
> +
> +			spi4: spi@a90000 {
> +				compatible = "qcom,geni-spi";
> +				reg = <0 00a90000 0 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
> +				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>;
> +				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
> +						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
> +						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>,
> +				       <&gpi_dma1 1 4 QCOM_GPI_SPI>;
> +				dma-names = "tx", "rx";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			i2c5: i2c@a94000 {
> +				compatible = "qcom,geni-i2c";
> +				reg = <0 00a94000 0 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_i2c5_data_clk>;
> +				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
> +				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
> +						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
> +						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>,
> +				       <&gpi_dma1 1 5 QCOM_GPI_I2C>;
> +				dma-names = "tx", "rx";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			spi5: spi@a94000 {
> +				compatible = "qcom,geni-spi";
> +				reg = <0 00a94000 0 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
> +				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>;
> +				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
> +						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
> +						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>,
> +				       <&gpi_dma1 1 5 QCOM_GPI_SPI>;
> +				dma-names = "tx", "rx";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			i2c6: i2c@a98000 {
> +				compatible = "qcom,geni-i2c";
> +				reg = <0 00a98000 0 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_i2c6_data_clk>;
> +				interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
> +				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
> +						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
> +						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>,
> +				       <&gpi_dma1 1 6 QCOM_GPI_I2C>;
> +				dma-names = "tx", "rx";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			spi6: spi@a98000 {
> +				compatible = "qcom,geni-spi";
> +				reg = <0 00a98000 0 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
> +				interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>;
> +				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
> +						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
> +						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				dmas = <&gpi_dma1 0 6 QCOM_GPI_SPI>,
> +				       <&gpi_dma1 1 6 QCOM_GPI_SPI>;
> +				dma-names = "tx", "rx";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			uart7: serial@a9c000 {
> +				compatible = "qcom,geni-debug-uart";
> +				reg = <0 00a9c000 0 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_uart7_default>;
> +				interrupts = <GIC_SPI 579 IRQ_TYPE_LEVEL_HIGH>;
> +				interconnect-names = "qup-core", "qup-config";
> +				interconnects =	<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
> +						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +		};
> +
> +		cnoc_main: interconnect@1500000 {
> +			compatible = "qcom,sm8550-cnoc-main";
> +			reg = <0 01500000 0 0x13080>;
> +			#interconnect-cells = <2>;
> +			qcom,bcm-voters = <&apps_bcm_voter>;
> +		};
> +
> +		config_noc: interconnect@1600000 {
> +			compatible = "qcom,sm8550-config-noc";
> +			reg = <0 01600000 0 0x6200>;
> +			#interconnect-cells = <2>;
> +			qcom,bcm-voters = <&apps_bcm_voter>;
> +		};
> +
> +		system_noc: interconnect@1680000 {
> +			compatible = "qcom,sm8550-system-noc";
> +			reg = <0 01680000 0 0x1d080>;
> +			#interconnect-cells = <2>;
> +			qcom,bcm-voters = <&apps_bcm_voter>;
> +		};
> +
> +		pcie_noc: interconnect@16c0000 {
> +			compatible = "qcom,sm8550-pcie-anoc";
> +			reg = <0 016c0000 0 0x12200>;
> +			#interconnect-cells = <2>;
> +			clocks = <&gcc GCC_AGGRE_NOC_PCIE_AXI_CLK>,
> +				 <&gcc GCC_CFG_NOC_PCIE_ANOC_AHB_CLK>;
> +			qcom,bcm-voters = <&apps_bcm_voter>;
> +		};
> +
> +		aggre1_noc: interconnect@16e0000 {
> +			compatible = "qcom,sm8550-aggre1-noc";
> +			reg = <0 016e0000 0 0x14400>;
> +			#interconnect-cells = <2>;
> +			clocks = <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
> +				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>;
> +			qcom,bcm-voters = <&apps_bcm_voter>;
> +		};
> +
> +		aggre2_noc: interconnect@1700000 {
> +			compatible = "qcom,sm8550-aggre2-noc";
> +			reg = <0 01700000 0 0x1e400>;
> +			#interconnect-cells = <2>;
> +			clocks = <&rpmhcc RPMH_IPA_CLK>;
> +			qcom,bcm-voters = <&apps_bcm_voter>;
> +		};
> +
> +		mmss_noc: interconnect@1780000 {
> +			compatible = "qcom,sm8550-mmss-noc";
> +			reg = <0 01780000 0 0x5b800>;
> +			#interconnect-cells = <2>;
> +			qcom,bcm-voters = <&apps_bcm_voter>;
> +		};
> +
> +		tcsr_mutex: hwlock@1f40000 {
> +			compatible = "qcom,tcsr-mutex";
> +			reg = <0 01f40000 0 0x20000>;
> +			#hwlock-cells = <1>;
> +		};
> +
> +		tcsr: clock-controller@1fc0000 {
> +			compatible = "qcom,sm8550-tcsrcc", "syscon";
> +			reg = <0 01fc0000 0 0x30000>;
> +			clocks = <&rpmhcc RPMH_CXO_CLK>,
> +				 <&rpmhcc RPMH_CXO_PAD_CLK>;
> +			#clock-cells = <1>;
> +			#reset-cells = <1>;
> +		};
> +
> +		lpass_lpiaon_noc: interconnect@7400000 {
> +			compatible = "qcom,sm8550-lpass-lpiaon-noc";
> +			reg = <0 07400000 0 0x19080>;
> +			#interconnect-cells = <2>;
> +			qcom,bcm-voters = <&apps_bcm_voter>;
> +		};
> +
> +		lpass_lpicx_noc: interconnect@7430000 {
> +			compatible = "qcom,sm8550-lpass-lpicx-noc";
> +			reg = <0 07430000 0 0x3a200>;
> +			#interconnect-cells = <2>;
> +			qcom,bcm-voters = <&apps_bcm_voter>;
> +		};
> +
> +		lpass_ag_noc: interconnect@7e40000 {
> +			compatible = "qcom,sm8550-lpass-ag-noc";
> +			reg = <0 07e40000 0 0xe080>;
> +			#interconnect-cells = <2>;
> +			qcom,bcm-voters = <&apps_bcm_voter>;
> +		};
> +
> +		sdhc_2: mmc@8804000 {
> +			compatible = "qcom,sm8550-sdhci", "qcom,sdhci-msm-v5";
> +			reg = <0 08804000 0 0x1000>;
> +
> +			interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-names = "hc_irq", "pwr_irq";
> +
> +			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
> +				 <&gcc GCC_SDCC2_APPS_CLK>,
> +				 <&rpmhcc RPMH_CXO_CLK>;
> +			clock-names = "iface", "core", "xo";
> +			iommus = <&apps_smmu 0x540 0>;
> +			qcom,dll-config = <0x0007642c>;
> +			qcom,ddr-config = <0x80040868>;
> +			power-domains = <&rpmhpd SM8550_CX>;
> +			operating-points-v2 = <&sdhc2_opp_table>;
> +
> +			interconnects = <&aggre2_noc MASTER_SDCC_2 0 &mc_virt SLAVE_EBI1 0>,
> +					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_SDCC_2 0>;
> +			interconnect-names = "sdhc-ddr", "cpu-sdhc";
> +			bus-width = <4>;
> +			dma-coherent;
> +
> +			/* Forbid SDR104/SDR50 - broken hw! */
> +			sdhci-caps-mask = <0x3 0>;
> +
> +			status = "disabled";
> +
> +			sdhc2_opp_table: opp-table {
> +				compatible = "operating-points-v2";
> +
> +				opp-19200000 {
> +					opp-hz = /bits/ 64 <19200000>;
> +					required-opps = <&rpmhpd_opp_min_svs>;
> +				};
> +
> +				opp-50000000 {
> +					opp-hz = /bits/ 64 <50000000>;
> +					required-opps = <&rpmhpd_opp_low_svs>;
> +				};
> +
> +				opp-100000000 {
> +					opp-hz = /bits/ 64 <100000000>;
> +					required-opps = <&rpmhpd_opp_svs>;
> +				};
> +
> +				opp-202000000 {
> +					opp-hz = /bits/ 64 <202000000>;
> +					required-opps = <&rpmhpd_opp_svs_l1>;
> +				};
> +			};
> +		};
> +
> +		pdc: interrupt-controller@b220000 {
> +			compatible = "qcom,sm8550-pdc", "qcom,pdc";
> +			reg = <0 0b220000 0 0x30000>, <0 0x174000f0 0 0x64>;
> +			qcom,pdc-ranges = <0 480 94>, <94 609 31>,
> +					  <125 63 1>, <126 716 12>,
> +					  <138 251 5>;
> +			#interrupt-cells = <2>;
> +			interrupt-parent = <&intc>;
> +			interrupt-controller;
> +		};
> +
> +		tsens0: thermal-sensor@c271000 {
> +			compatible = "qcom,sm8550-tsens", "qcom,tsens-v2";
> +			reg = <0 0c271000 0 0x1000>, /* TM */
> +			      <0 0c222000 0 0x1000>; /* SROT */
> +			#qcom,sensors = <16>;
> +			interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 640 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-names = "uplow", "critical";
> +			#thermal-sensor-cells = <1>;
> +		};
> +
> +		tsens1: thermal-sensor@c272000 {
> +			compatible = "qcom,sm8550-tsens", "qcom,tsens-v2";
> +			reg = <0 0c272000 0 0x1000>, /* TM */
> +			      <0 0c223000 0 0x1000>; /* SROT */
> +			#qcom,sensors = <16>;
> +			interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-names = "uplow", "critical";
> +			#thermal-sensor-cells = <1>;
> +		};
> +
> +		tsens2: thermal-sensor@c273000 {
> +			compatible = "qcom,sm8550-tsens", "qcom,tsens-v2";
> +			reg = <0 0c273000 0 0x1000>, /* TM */
> +			      <0 0c224000 0 0x1000>; /* SROT */
> +			#qcom,sensors = <16>;
> +			interrupts = <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 642 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-names = "uplow", "critical";
> +			#thermal-sensor-cells = <1>;
> +		};
> +
> +		aoss_qmp: power-controller@c300000 {
> +			compatible = "qcom,sm8550-aoss-qmp", "qcom,aoss-qmp";
> +			reg = <0 0c300000 0 0x400>;
> +			interrupt-parent = <&ipcc>;
> +			interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP
> +						     IRQ_TYPE_EDGE_RISING>;
> +			mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>;
> +
> +			#clock-cells = <0>;
> +		};
> +
> +		sram@c3f0000 {
> +			compatible = "qcom,rpmh-stats";
> +			reg = <0 0c3f0000 0 0x400>;
> +		};
> +
> +		spmi_bus: spmi@c400000 {
> +			compatible = "qcom,spmi-pmic-arb";
> +			reg = <0 0c400000 0 0x3000>,
> +			      <0 0c500000 0 0x4000000>,
> +			      <0 0c440000 0 0x80000>,
> +			      <0 0c4c0000 0 0x20000>,
> +			      <0 0c42d000 0 0x4000>;
> +			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
> +			interrupt-names = "periph_irq";
> +			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
> +			qcom,ee = <0>;
> +			qcom,channel = <0>;
> +			qcom,bus-id = <0>;
> +			#address-cells = <2>;
> +			#size-cells = <0>;
> +			interrupt-controller;
> +			#interrupt-cells = <4>;
> +		};
> +
> +		tlmm: pinctrl@f000000 {
> +			compatible = "qcom,sm8550-tlmm";
> +			reg = <0 0f100000 0 0x300000>;
> +			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +			gpio-ranges = <&tlmm 0 0 211>;
> +			wakeup-parent = <&pdc>;
> +
> +			hub_i2c0_data_clk: hub-i2c0-data-clk-state {
> +				/* SDA, SCL */
> +				pins = "gpio16", "gpio17";
> +				function = "i2chub0_se0";
> +				drive-strength = <2>;
> +				bias-pull-up;
> +			};
> +
> +			hub_i2c1_data_clk: hub-i2c1-data-clk-state {
> +				/* SDA, SCL */
> +				pins = "gpio18", "gpio19";
> +				function = "i2chub0_se1";
> +				drive-strength = <2>;
> +				bias-pull-up;
> +			};
> +
> +			hub_i2c2_data_clk: hub-i2c2-data-clk-state {
> +				/* SDA, SCL */
> +				pins = "gpio20", "gpio21";
> +				function = "i2chub0_se2";
> +				drive-strength = <2>;
> +				bias-pull-up;
> +			};
> +
> +			hub_i2c3_data_clk: hub-i2c3-data-clk-state {
> +				/* SDA, SCL */
> +				pins = "gpio22", "gpio23";
> +				function = "i2chub0_se3";
> +				drive-strength = <2>;
> +				bias-pull-up;
> +			};
> +
> +			hub_i2c4_data_clk: hub-i2c4-data-clk-state {
> +				/* SDA, SCL */
> +				pins = "gpio4", "gpio5";
> +				function = "i2chub0_se4";
> +				drive-strength = <2>;
> +				bias-pull-up;
> +			};
> +
> +			hub_i2c5_data_clk: hub-i2c5-data-clk-state {
> +				/* SDA, SCL */
> +				pins = "gpio6", "gpio7";
> +				function = "i2chub0_se5";
> +				drive-strength = <2>;
> +				bias-pull-up;
> +			};
> +
> +			hub_i2c6_data_clk: hub-i2c6-data-clk-state {
> +				/* SDA, SCL */
> +				pins = "gpio8", "gpio9";
> +				function = "i2chub0_se6";
> +				drive-strength = <2>;
> +				bias-pull-up;
> +			};
> +
> +			hub_i2c7_data_clk: hub-i2c7-data-clk-state {
> +				/* SDA, SCL */
> +				pins = "gpio10", "gpio11";
> +				function = "i2chub0_se7";
> +				drive-strength = <2>;
> +				bias-pull-up;
> +			};
> +
> +			hub_i2c8_data_clk: hub-i2c8-data-clk-state {
> +				/* SDA, SCL */
> +				pins = "gpio206", "gpio207";
> +				function = "i2chub0_se8";
> +				drive-strength = <2>;
> +				bias-pull-up;
> +			};
> +
> +			hub_i2c9_data_clk: hub-i2c9-data-clk-state {
> +				/* SDA, SCL */
> +				pins = "gpio84", "gpio85";
> +				function = "i2chub0_se9";
> +				drive-strength = <2>;
> +				bias-pull-up;
> +			};
> +
> +			pcie0_default_state: pcie0-default-state {
> +				perst-pins {
> +					pins = "gpio94";
> +					function = "gpio";
> +					drive-strength = <2>;
> +					bias-pull-down;
> +				};
> +
> +				clkreq-pins {
> +					pins = "gpio95";
> +					function = "pcie0_clk_req_n";
> +					drive-strength = <2>;
> +					bias-pull-up;
> +				};
> +
> +				wake-pins {
> +					pins = "gpio96";
> +					function = "gpio";
> +					drive-strength = <2>;
> +					bias-pull-up;
> +				};
> +			};
> +
> +			pcie1_default_state: pcie1-default-state {
> +				perst-pins {
> +					pins = "gpio97";
> +					function = "gpio";
> +					drive-strength = <2>;
> +					bias-pull-down;
> +				};
> +
> +				clkreq-pins {
> +					pins = "gpio98";
> +					function = "pcie1_clk_req_n";
> +					drive-strength = <2>;
> +					bias-pull-up;
> +				};
> +
> +				wake-pins {
> +					pins = "gpio99";
> +					function = "gpio";
> +					drive-strength = <2>;
> +					bias-pull-up;
> +				};
> +			};
> +
> +			qup_i2c0_data_clk: qup-i2c0-data-clk-state {
> +				/* SDA, SCL */
> +				pins = "gpio28", "gpio29";
> +				function = "qup1_se0";
> +				drive-strength = <2>;
> +				bias-pull-up;
> +				qcom,i2c-pull;
> +			};
> +
> +			qup_i2c1_data_clk: qup-i2c1-data-clk-state {
> +				/* SDA, SCL */
> +				pins = "gpio32", "gpio33";
> +				function = "qup1_se1";
> +				drive-strength = <2>;
> +				bias-pull-up;
> +				qcom,i2c-pull;
> +			};
> +
> +			qup_i2c2_data_clk: qup-i2c2-data-clk-state {
> +				/* SDA, SCL */
> +				pins = "gpio36", "gpio37";
> +				function = "qup1_se2";
> +				drive-strength = <2>;
> +				bias-pull-up;
> +				qcom,i2c-pull;
> +			};
> +
> +			qup_i2c3_data_clk: qup-i2c3-data-clk-state {
> +				/* SDA, SCL */
> +				pins = "gpio40", "gpio41";
> +				function = "qup1_se3";
> +				drive-strength = <2>;
> +				bias-pull-up;
> +				qcom,i2c-pull;
> +			};
> +
> +			qup_i2c4_data_clk: qup-i2c4-data-clk-state {
> +				/* SDA, SCL */
> +				pins = "gpio44", "gpio45";
> +				function = "qup1_se4";
> +				drive-strength = <2>;
> +				bias-pull-up;
> +				qcom,i2c-pull;
> +			};
> +
> +			qup_i2c5_data_clk: qup-i2c5-data-clk-state {
> +				/* SDA, SCL */
> +				pins = "gpio52", "gpio53";
> +				function = "qup1_se5";
> +				drive-strength = <2>;
> +				bias-pull-up;
> +				qcom,i2c-pull;
> +			};
> +
> +			qup_i2c6_data_clk: qup-i2c6-data-clk-state {
> +				/* SDA, SCL */
> +				pins = "gpio48", "gpio49";
> +				function = "qup1_se6";
> +				drive-strength = <2>;
> +				bias-pull-up;
> +				qcom,i2c-pull;
> +			};
> +
> +			qup_i2c8_data_clk: qup-i2c8-data-clk-state {
> +				scl-pins {
> +					pins = "gpio57";
> +					function = "qup2_se0_l1_mira";
> +					drive-strength = <2>;
> +					bias-pull-up;
> +					qcom,i2c-pull;
> +				};
> +
> +				sda-pins {
> +					pins = "gpio56";
> +					function = "qup2_se0_l0_mira";
> +					drive-strength = <2>;
> +					bias-pull-up;
> +					qcom,i2c-pull;
> +				};
> +			};
> +
> +			qup_i2c9_data_clk: qup-i2c9-data-clk-state {
> +				/* SDA, SCL */
> +				pins = "gpio60", "gpio61";
> +				function = "qup2_se1";
> +				drive-strength = <2>;
> +				bias-pull-up;
> +				qcom,i2c-pull;
> +			};
> +
> +			qup_i2c10_data_clk: qup-i2c10-data-clk-state {
> +				/* SDA, SCL */
> +				pins = "gpio64", "gpio65";
> +				function = "qup2_se2";
> +				drive-strength = <2>;
> +				bias-pull-up;
> +				qcom,i2c-pull;
> +			};
> +
> +			qup_i2c11_data_clk: qup-i2c11-data-clk-state {
> +				/* SDA, SCL */
> +				pins = "gpio68", "gpio69";
> +				function = "qup2_se3";
> +				drive-strength = <2>;
> +				bias-pull-up;
> +				qcom,i2c-pull;
> +			};
> +
> +			qup_i2c12_data_clk: qup-i2c12-data-clk-state {
> +				/* SDA, SCL */
> +				pins = "gpio2", "gpio3";
> +				function = "qup2_se4";
> +				drive-strength = <2>;
> +				bias-pull-up;
> +				qcom,i2c-pull;
> +			};
> +
> +			qup_i2c13_data_clk: qup-i2c13-data-clk-state {
> +				/* SDA, SCL */
> +				pins = "gpio80", "gpio81";
> +				function = "qup2_se5";
> +				drive-strength = <2>;
> +				bias-pull-up;
> +				qcom,i2c-pull;
> +			};
> +
> +			qup_i2c15_data_clk: qup-i2c15-data-clk-state {
> +				/* SDA, SCL */
> +				pins = "gpio72", "gpio106";
> +				function = "qup2_se7";
> +				drive-strength = <2>;
> +				bias-pull-up;
> +				qcom,i2c-pull;
> +			};
> +
> +			qup_spi0_cs: qup-spi0-cs-state {
> +				cs-pins {
> +					pins = "gpio31";
> +					function = "qup1_se0";
> +				};
> +			};
> +
> +			qup_spi0_data_clk: qup-spi0-data-clk-state {
> +				/* MISO, MOSI, CLK */
> +				pins = "gpio28", "gpio29", "gpio30";
> +				function = "qup1_se0";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_spi1_cs: qup-spi1-cs-state {
> +				pins = "gpio35";
> +				function = "qup1_se1";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_spi1_data_clk: qup-spi1-data-clk-state {
> +				/* MISO, MOSI, CLK */
> +				pins = "gpio32", "gpio33", "gpio34";
> +				function = "qup1_se1";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_spi2_cs: qup-spi2-cs-state {
> +				pins = "gpio39";
> +				function = "qup1_se2";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_spi2_data_clk: qup-spi2-data-clk-state {
> +				/* MISO, MOSI, CLK */
> +				pins = "gpio36", "gpio37", "gpio38";
> +				function = "qup1_se2";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_spi3_cs: qup-spi3-cs-state {
> +				pins = "gpio43";
> +				function = "qup1_se3";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_spi3_data_clk: qup-spi3-data-clk-state {
> +				/* MISO, MOSI, CLK */
> +				pins = "gpio40", "gpio41", "gpio42";
> +				function = "qup1_se3";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_spi4_cs: qup-spi4-cs-state {
> +				pins = "gpio47";
> +				function = "qup1_se4";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_spi4_data_clk: qup-spi4-data-clk-state {
> +				/* MISO, MOSI, CLK */
> +				pins = "gpio44", "gpio45", "gpio46";
> +				function = "qup1_se4";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_spi5_cs: qup-spi5-cs-state {
> +				pins = "gpio55";
> +				function = "qup1_se5";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_spi5_data_clk: qup-spi5-data-clk-state {
> +				/* MISO, MOSI, CLK */
> +				pins = "gpio52", "gpio53", "gpio54";
> +				function = "qup1_se5";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_spi6_cs: qup-spi6-cs-state {
> +				pins = "gpio51";
> +				function = "qup1_se6";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_spi6_data_clk: qup-spi6-data-clk-state {
> +				/* MISO, MOSI, CLK */
> +				pins = "gpio48", "gpio49", "gpio50";
> +				function = "qup1_se6";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_spi8_cs: qup-spi8-cs-state {
> +				pins = "gpio59";
> +				function = "qup2_se0_l3_mira";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_spi8_data_clk: qup-spi8-data-clk-state {
> +				/* MISO, MOSI, CLK */
> +				pins = "gpio56", "gpio57", "gpio58";
> +				function = "qup2_se0_l2_mira";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_spi9_cs: qup-spi9-cs-state {
> +				pins = "gpio63";
> +				function = "qup2_se1";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_spi9_data_clk: qup-spi9-data-clk-state {
> +				/* MISO, MOSI, CLK */
> +				pins = "gpio60", "gpio61", "gpio62";
> +				function = "qup2_se1";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_spi10_cs: qup-spi10-cs-state {
> +				pins = "gpio67";
> +				function = "qup2_se2";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_spi10_data_clk: qup-spi10-data-clk-state {
> +				/* MISO, MOSI, CLK */
> +				pins = "gpio64", "gpio65", "gpio66";
> +				function = "qup2_se2";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_spi11_cs: qup-spi11-cs-state {
> +				pins = "gpio71";
> +				function = "qup2_se3";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_spi11_data_clk: qup-spi11-data-clk-state {
> +				/* MISO, MOSI, CLK */
> +				pins = "gpio68", "gpio69", "gpio70";
> +				function = "qup2_se3";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_spi12_cs: qup-spi12-cs-state {
> +				pins = "gpio119";
> +				function = "qup2_se4";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_spi12_data_clk: qup-spi12-data-clk-state {
> +				/* MISO, MOSI, CLK */
> +				pins = "gpio2", "gpio3", "gpio118";
> +				function = "qup2_se4";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_spi13_cs: qup-spi13-cs-state {
> +				pins = "gpio83";
> +				function = "qup2_se5";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_spi13_data_clk: qup-spi13-data-clk-state {
> +				/* MISO, MOSI, CLK */
> +				pins = "gpio80", "gpio81", "gpio82";
> +				function = "qup2_se5";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_spi15_cs: qup-spi15-cs-state {
> +				pins = "gpio75";
> +				function = "qup2_se7";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_spi15_data_clk: qup-spi15-data-clk-state {
> +				/* MISO, MOSI, CLK */
> +				pins = "gpio72", "gpio106", "gpio74";
> +				function = "qup2_se7";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_uart7_default: qup-uart7-default-state {
> +				/* TX, RX */
> +				pins = "gpio26", "gpio27";
> +				function = "qup1_se7";
> +				drive-strength = <2>;
> +				bias-disable;
> +			};
> +
> +			sdc2_sleep: sdc2-sleep-state {
> +				clk-pins {
> +					pins = "sdc2_clk";
> +					bias-disable;
> +					drive-strength = <2>;
> +				};
> +
> +				cmd-pins {
> +					pins = "sdc2_cmd";
> +					bias-pull-up;
> +					drive-strength = <2>;
> +				};
> +
> +				data-pins {
> +					pins = "sdc2_data";
> +					bias-pull-up;
> +					drive-strength = <2>;
> +				};
> +			};
> +
> +			sdc2_default: sdc2-default-state {
> +				clk-pins {
> +					pins = "sdc2_clk";
> +					bias-disable;
> +					drive-strength = <16>;
> +				};
> +
> +				cmd-pins {
> +					pins = "sdc2_cmd";
> +					bias-pull-up;
> +					drive-strength = <10>;
> +				};
> +
> +				data-pins {
> +					pins = "sdc2_data";
> +					bias-pull-up;
> +					drive-strength = <10>;
> +				};
> +			};
> +		};
> +
> +		apps_smmu: iommu@15000000 {
> +			compatible = "qcom,smmu-500", "arm,mmu-500";
> +			reg = <0 0x15000000 0 0x100000>;
> +			#iommu-cells = <2>;
> +			#global-interrupts = <1>;
> +			interrupts =	<GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 706 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 689 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>;
> +		};
> +
> +		intc: interrupt-controller@17100000 {
> +			compatible = "arm,gic-v3";
> +			reg = <0 0x17100000 0 0x10000>,	/* GICD */
> +			      <0 0x17180000 0 0x200000>;	/* GICR * 8 */
> +			ranges;
> +			#interrupt-cells = <3>;
> +			interrupt-controller;
> +			#redistributor-regions = <1>;
> +			redistributor-stride = <0 0x40000>;
> +			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
> +			#address-cells = <2>;
> +			#size-cells = <2>;
> +
> +			gic_its: msi-controller@17140000 {
> +				compatible = "arm,gic-v3-its";
> +				reg = <0 0x17140000 0 0x20000>;
> +				msi-controller;
> +				#msi-cells = <1>;
> +			};
> +		};
> +
> +		timer@17420000 {
> +			compatible = "arm,armv7-timer-mem";
> +			reg = <0 0x17420000 0 0x1000>;
> +			ranges = <0 0 0 0x20000000>;
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +
> +			frame@17421000 {
> +				reg = <0x17421000 0x1000>,
> +				      <0x17422000 0x1000>;
> +				frame-number = <0>;
> +				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
> +					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
> +			};
> +
> +			frame@17423000 {
> +				reg = <0x17423000 0x1000>;
> +				frame-number = <1>;
> +				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
> +				status = "disabled";
> +			};
> +
> +			frame@17425000 {
> +				reg = <0x17425000 0x1000>;
> +				frame-number = <2>;
> +				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
> +				status = "disabled";
> +			};
> +
> +			frame@17427000 {
> +				reg = <0x17427000 0x1000>;
> +				frame-number = <3>;
> +				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
> +				status = "disabled";
> +			};
> +
> +			frame@17429000 {
> +				reg = <0x17429000 0x1000>;
> +				frame-number = <4>;
> +				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
> +				status = "disabled";
> +			};
> +
> +			frame@1742b000 {
> +				reg = <0x1742b000 0x1000>;
> +				frame-number = <5>;
> +				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
> +				status = "disabled";
> +			};
> +
> +			frame@1742d000 {
> +				reg = <0x1742d000 0x1000>;
> +				frame-number = <6>;
> +				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
> +				status = "disabled";
> +			};
> +		};
> +
> +		apps_rsc: rsc@17a00000 {
> +			label = "apps_rsc";
> +			compatible = "qcom,rpmh-rsc";
> +			reg = <0 0x17a00000 0 0x10000>,
> +			      <0 0x17a10000 0 0x10000>,
> +			      <0 0x17a20000 0 0x10000>,
> +			      <0 0x17a30000 0 0x10000>;
> +			reg-names = "drv-0", "drv-1", "drv-2", "drv-3";
> +			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
> +			qcom,tcs-offset = <0xd00>;
> +			qcom,drv-id = <2>;
> +			qcom,tcs-config = <ACTIVE_TCS    3>, <SLEEP_TCS     2>,
> +					  <WAKE_TCS      2>, <CONTROL_TCS   0>;
> +
> +			apps_bcm_voter: bcm-voter {
> +				compatible = "qcom,bcm-voter";
> +			};
> +
> +			rpmhcc: clock-controller {
> +				compatible = "qcom,sm8550-rpmh-clk";
> +				#clock-cells = <1>;
> +				clock-names = "xo";
> +				clocks = <&xo_board>;
> +			};
> +
> +			rpmhpd: power-controller {
> +				compatible = "qcom,sm8550-rpmhpd";
> +				#power-domain-cells = <1>;
> +				operating-points-v2 = <&rpmhpd_opp_table>;
> +
> +				rpmhpd_opp_table: opp-table {
> +					compatible = "operating-points-v2";
> +
> +					rpmhpd_opp_ret: opp1 {
> +						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
> +					};
> +
> +					rpmhpd_opp_min_svs: opp2 {
> +						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
> +					};
> +
> +					rpmhpd_opp_low_svs: opp3 {
> +						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
> +					};
> +
> +					rpmhpd_opp_svs: opp4 {
> +						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
> +					};
> +
> +					rpmhpd_opp_svs_l1: opp5 {
> +						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
> +					};
> +
> +					rpmhpd_opp_nom: opp6 {
> +						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
> +					};
> +
> +					rpmhpd_opp_nom_l1: opp7 {
> +						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
> +					};
> +
> +					rpmhpd_opp_nom_l2: opp8 {
> +						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
> +					};
> +
> +					rpmhpd_opp_turbo: opp9 {
> +						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
> +					};
> +
> +					rpmhpd_opp_turbo_l1: opp10 {
> +						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
> +					};
> +				};
> +			};
> +		};
> +
> +		cpufreq_hw: cpufreq@17d91000 {
> +			compatible = "qcom,sm8550-cpufreq-epss", "qcom,cpufreq-epss";
> +			reg = <0 0x17d91000 0 0x1000>,
> +			      <0 0x17d92000 0 0x1000>,
> +			      <0 0x17d93000 0 0x1000>;
> +			reg-names = "freq-domain0", "freq-domain1", "freq-domain2";
> +			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
> +			clock-names = "xo", "alternate";
> +			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-names = "dcvsh-irq-0", "dcvsh-irq-1", "dcvsh-irq-2";
> +			#freq-domain-cells = <1>;
> +		};
> +
> +		pmu@24091000 {
> +			compatible = "qcom,sm8550-llcc-bwmon", "qcom,sc7280-llcc-bwmon";
> +			reg = <0 0x24091000 0 0x1000>;
> +			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
> +			interconnects = <&mc_virt MASTER_LLCC 3 &mc_virt SLAVE_EBI1 3>;
> +
> +			operating-points-v2 = <&llcc_bwmon_opp_table>;
> +
> +			llcc_bwmon_opp_table: opp-table {
> +				compatible = "operating-points-v2";
> +
> +				opp-0 {
> +					opp-peak-kBps = <2086000>;
> +				};
> +
> +				opp-1 {
> +					opp-peak-kBps = <2929000>;
> +				};
> +
> +				opp-2 {
> +					opp-peak-kBps = <5931000>;
> +				};
> +
> +				opp-3 {
> +					opp-peak-kBps = <6515000>;
> +				};
> +
> +				opp-4 {
> +					opp-peak-kBps = <7980000>;
> +				};
> +
> +				opp-5 {
> +					opp-peak-kBps = <10437000>;
> +				};
> +
> +				opp-6 {
> +					opp-peak-kBps = <12157000>;
> +				};
> +
> +				opp-7 {
> +					opp-peak-kBps = <14060000>;
> +				};
> +
> +				opp-8 {
> +					opp-peak-kBps = <16113000>;
> +				};
> +			};
> +		};
> +
> +		pmu@240b6400 {
> +			compatible = "qcom,sm8550-cpu-bwmon", "qcom,msm8998-bwmon";
> +			reg = <0 0x240b6400 0 0x600>;
> +			interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>;
> +			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &gem_noc SLAVE_LLCC 3>;
> +
> +			operating-points-v2 = <&cpu_bwmon_opp_table>;
> +
> +			cpu_bwmon_opp_table: opp-table {
> +				compatible = "operating-points-v2";
> +
> +				opp-0 {
> +					opp-peak-kBps = <4577000>;
> +				};
> +
> +				opp-1 {
> +					opp-peak-kBps = <7110000>;
> +				};
> +
> +				opp-2 {
> +					opp-peak-kBps = <9155000>;
> +				};
> +
> +				opp-3 {
> +					opp-peak-kBps = <12298000>;
> +				};
> +
> +				opp-4 {
> +					opp-peak-kBps = <14236000>;
> +				};
> +
> +				opp-5 {
> +					opp-peak-kBps = <16265000>;
> +				};
> +			};
> +		};
> +
> +		gem_noc: interconnect@24100000 {
> +			compatible = "qcom,sm8550-gem-noc";
> +			reg = <0 0x24100000 0 0xbb800>;
> +			#interconnect-cells = <2>;
> +			qcom,bcm-voters = <&apps_bcm_voter>;
> +		};
> +
> +		system-cache-controller@25000000 {
> +			compatible = "qcom,sm8550-llcc";
> +			reg = <0 0x25000000 0 0x800000>,
> +			      <0 0x25800000 0 0x200000>;
> +			reg-names = "llcc_base", "llcc_broadcast_base";
> +			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
> +		};
> +
> +		nsp_noc: interconnect@320c0000 {
> +			compatible = "qcom,sm8550-nsp-noc";
> +			reg = <0 0x320c0000 0 0xe080>;
> +			#interconnect-cells = <2>;
> +			qcom,bcm-voters = <&apps_bcm_voter>;
> +		};
> +	};
> +
> +	thermal-zones {
> +		aoss0-thermal {
> +			polling-delay-passive = <0>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&tsens0 0>;
> +
> +			trips {
> +				thermal-engine-config {
> +					temperature = <125000>;
> +					hysteresis = <1000>;
> +					type = "passive";
> +				};
> +
> +				reset-mon-config {
> +					temperature = <115000>;
> +					hysteresis = <5000>;
> +					type = "passive";
> +				};
> +			};
> +		};
> +
> +		cpuss0-thermal {
> +			polling-delay-passive = <0>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&tsens0 1>;
> +
> +			trips {
> +				thermal-engine-config {
> +					temperature = <125000>;
> +					hysteresis = <1000>;
> +					type = "passive";
> +				};
> +
> +				reset-mon-config {
> +					temperature = <115000>;
> +					hysteresis = <5000>;
> +					type = "passive";
> +				};
> +			};
> +		};
> +
> +		cpuss1-thermal {
> +			polling-delay-passive = <0>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&tsens0 2>;
> +
> +			trips {
> +				thermal-engine-config {
> +					temperature = <125000>;
> +					hysteresis = <1000>;
> +					type = "passive";
> +				};
> +
> +				reset-mon-config {
> +					temperature = <115000>;
> +					hysteresis = <5000>;
> +					type = "passive";
> +				};
> +			};
> +		};
> +
> +		cpuss2-thermal {
> +			polling-delay-passive = <0>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&tsens0 3>;
> +
> +			trips {
> +				thermal-engine-config {
> +					temperature = <125000>;
> +					hysteresis = <1000>;
> +					type = "passive";
> +				};
> +
> +				reset-mon-config {
> +					temperature = <115000>;
> +					hysteresis = <5000>;
> +					type = "passive";
> +				};
> +			};
> +		};
> +
> +		cpuss3-thermal {
> +			polling-delay-passive = <0>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&tsens0 4>;
> +
> +			trips {
> +				thermal-engine-config {
> +					temperature = <125000>;
> +					hysteresis = <1000>;
> +					type = "passive";
> +				};
> +
> +				reset-mon-config {
> +					temperature = <115000>;
> +					hysteresis = <5000>;
> +					type = "passive";
> +				};
> +			};
> +		};
> +
> +		cpu3-top-thermal {
> +			polling-delay-passive = <0>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&tsens0 5>;
> +
> +			trips {
> +				cpu3_top_alert0: trip-point0 {
> +					temperature = <90000>;
> +					hysteresis = <2000>;
> +					type = "passive";
> +				};
> +
> +				cpu3_top_alert1: trip-point1 {
> +					temperature = <95000>;
> +					hysteresis = <2000>;
> +					type = "passive";
> +				};
> +
> +				cpu3_top_crit: cpu-critical {
> +					temperature = <110000>;
> +					hysteresis = <1000>;
> +					type = "critical";
> +				};
> +			};
> +		};
> +
> +		cpu3-bottom-thermal {
> +			polling-delay-passive = <0>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&tsens0 6>;
> +
> +			trips {
> +				cpu3_bottom_alert0: trip-point0 {
> +					temperature = <90000>;
> +					hysteresis = <2000>;
> +					type = "passive";
> +				};
> +
> +				cpu3_bottom_alert1: trip-point1 {
> +					temperature = <95000>;
> +					hysteresis = <2000>;
> +					type = "passive";
> +				};
> +
> +				cpu3_bottom_crit: cpu-critical {
> +					temperature = <110000>;
> +					hysteresis = <1000>;
> +					type = "critical";
> +				};
> +			};
> +		};
> +
> +		cpu4-top-thermal {
> +			polling-delay-passive = <0>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&tsens0 7>;
> +
> +			trips {
> +				cpu4_top_alert0: trip-point0 {
> +					temperature = <90000>;
> +					hysteresis = <2000>;
> +					type = "passive";
> +				};
> +
> +				cpu4_top_alert1: trip-point1 {
> +					temperature = <95000>;
> +					hysteresis = <2000>;
> +					type = "passive";
> +				};
> +
> +				cpu4_top_crit: cpu-critical {
> +					temperature = <110000>;
> +					hysteresis = <1000>;
> +					type = "critical";
> +				};
> +			};
> +		};
> +
> +		cpu4-bottom-thermal {
> +			polling-delay-passive = <0>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&tsens0 8>;
> +
> +			trips {
> +				cpu4_bottom_alert0: trip-point0 {
> +					temperature = <90000>;
> +					hysteresis = <2000>;
> +					type = "passive";
> +				};
> +
> +				cpu4_bottom_alert1: trip-point1 {
> +					temperature = <95000>;
> +					hysteresis = <2000>;
> +					type = "passive";
> +				};
> +
> +				cpu4_bottom_crit: cpu-critical {
> +					temperature = <110000>;
> +					hysteresis = <1000>;
> +					type = "critical";
> +				};
> +			};
> +		};
> +
> +		cpu5-top-thermal {
> +			polling-delay-passive = <0>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&tsens0 9>;
> +
> +			trips {
> +				cpu5_top_alert0: trip-point0 {
> +					temperature = <90000>;
> +					hysteresis = <2000>;
> +					type = "passive";
> +				};
> +
> +				cpu5_top_alert1: trip-point1 {
> +					temperature = <95000>;
> +					hysteresis = <2000>;
> +					type = "passive";
> +				};
> +
> +				cpu5_top_crit: cpu-critical {
> +					temperature = <110000>;
> +					hysteresis = <1000>;
> +					type = "critical";
> +				};
> +			};
> +		};
> +
> +		cpu5-bottom-thermal {
> +			polling-delay-passive = <0>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&tsens0 10>;
> +
> +			trips {
> +				cpu5_bottom_alert0: trip-point0 {
> +					temperature = <90000>;
> +					hysteresis = <2000>;
> +					type = "passive";
> +				};
> +
> +				cpu5_bottom_alert1: trip-point1 {
> +					temperature = <95000>;
> +					hysteresis = <2000>;
> +					type = "passive";
> +				};
> +
> +				cpu5_bottom_crit: cpu-critical {
> +					temperature = <110000>;
> +					hysteresis = <1000>;
> +					type = "critical";
> +				};
> +			};
> +		};
> +
> +		cpu6-top-thermal {
> +			polling-delay-passive = <0>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&tsens0 11>;
> +
> +			trips {
> +				cpu6_top_alert0: trip-point0 {
> +					temperature = <90000>;
> +					hysteresis = <2000>;
> +					type = "passive";
> +				};
> +
> +				cpu6_top_alert1: trip-point1 {
> +					temperature = <95000>;
> +					hysteresis = <2000>;
> +					type = "passive";
> +				};
> +
> +				cpu6_top_crit: cpu-critical {
> +					temperature = <110000>;
> +					hysteresis = <1000>;
> +					type = "critical";
> +				};
> +			};
> +		};
> +
> +		cpu6-bottom-thermal {
> +			polling-delay-passive = <0>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&tsens0 12>;
> +
> +			trips {
> +				cpu6_bottom_alert0: trip-point0 {
> +					temperature = <90000>;
> +					hysteresis = <2000>;
> +					type = "passive";
> +				};
> +
> +				cpu6_bottom_alert1: trip-point1 {
> +					temperature = <95000>;
> +					hysteresis = <2000>;
> +					type = "passive";
> +				};
> +
> +				cpu6_bottom_crit: cpu-critical {
> +					temperature = <110000>;
> +					hysteresis = <1000>;
> +					type = "critical";
> +				};
> +			};
> +		};
> +
> +		cpu7-top-thermal {
> +			polling-delay-passive = <0>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&tsens0 13>;
> +
> +			trips {
> +				cpu7_top_alert0: trip-point0 {
> +					temperature = <90000>;
> +					hysteresis = <2000>;
> +					type = "passive";
> +				};
> +
> +				cpu7_top_alert1: trip-point1 {
> +					temperature = <95000>;
> +					hysteresis = <2000>;
> +					type = "passive";
> +				};
> +
> +				cpu7_top_crit: cpu-critical {
> +					temperature = <110000>;
> +					hysteresis = <1000>;
> +					type = "critical";
> +				};
> +			};
> +		};
> +
> +		cpu7-middle-thermal {
> +			polling-delay-passive = <0>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&tsens0 14>;
> +
> +			trips {
> +				cpu7_middle_alert0: trip-point0 {
> +					temperature = <90000>;
> +					hysteresis = <2000>;
> +					type = "passive";
> +				};
> +
> +				cpu7_middle_alert1: trip-point1 {
> +					temperature = <95000>;
> +					hysteresis = <2000>;
> +					type = "passive";
> +				};
> +
> +				cpu7_middle_crit: cpu-critical {
> +					temperature = <110000>;
> +					hysteresis = <1000>;
> +					type = "critical";
> +				};
> +			};
> +		};
> +
> +		cpu7-bottom-thermal {
> +			polling-delay-passive = <0>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&tsens0 15>;
> +
> +			trips {
> +				cpu7_bottom_alert0: trip-point0 {
> +					temperature = <90000>;
> +					hysteresis = <2000>;
> +					type = "passive";
> +				};
> +
> +				cpu7_bottom_alert1: trip-point1 {
> +					temperature = <95000>;
> +					hysteresis = <2000>;
> +					type = "passive";
> +				};
> +
> +				cpu7_bottom_crit: cpu-critical {
> +					temperature = <110000>;
> +					hysteresis = <1000>;
> +					type = "critical";
> +				};
> +			};
> +		};
> +
> +		aoss1-thermal {
> +			polling-delay-passive = <0>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&tsens1 0>;
> +
> +			trips {
> +				thermal-engine-config {
> +					temperature = <125000>;
> +					hysteresis = <1000>;
> +					type = "passive";
> +				};
> +
> +				reset-mon-config {
> +					temperature = <115000>;
> +					hysteresis = <5000>;
> +					type = "passive";
> +				};
> +			};
> +		};
> +
> +		cpu0-thermal {
> +			polling-delay-passive = <0>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&tsens1 1>;
> +
> +			trips {
> +				cpu0_alert0: trip-point0 {
> +					temperature = <90000>;
> +					hysteresis = <2000>;
> +					type = "passive";
> +				};
> +
> +				cpu0_alert1: trip-point1 {
> +					temperature = <95000>;
> +					hysteresis = <2000>;
> +					type = "passive";
> +				};
> +
> +				cpu0_crit: cpu-critical {
> +					temperature = <110000>;
> +					hysteresis = <1000>;
> +					type = "critical";
> +				};
> +			};
> +		};
> +
> +		cpu1-thermal {
> +			polling-delay-passive = <0>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&tsens1 2>;
> +
> +			trips {
> +				cpu1_alert0: trip-point0 {
> +					temperature = <90000>;
> +					hysteresis = <2000>;
> +					type = "passive";
> +				};
> +
> +				cpu1_alert1: trip-point1 {
> +					temperature = <95000>;
> +					hysteresis = <2000>;
> +					type = "passive";
> +				};
> +
> +				cpu1_crit: cpu-critical {
> +					temperature = <110000>;
> +					hysteresis = <1000>;
> +					type = "critical";
> +				};
> +			};
> +		};
> +
> +		cpu2-thermal {
> +			polling-delay-passive = <0>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&tsens1 3>;
> +
> +			trips {
> +				cpu2_alert0: trip-point0 {
> +					temperature = <90000>;
> +					hysteresis = <2000>;
> +					type = "passive";
> +				};
> +
> +				cpu2_alert1: trip-point1 {
> +					temperature = <95000>;
> +					hysteresis = <2000>;
> +					type = "passive";
> +				};
> +
> +				cpu2_crit: cpu-critical {
> +					temperature = <110000>;
> +					hysteresis = <1000>;
> +					type = "critical";
> +				};
> +			};
> +		};
> +
> +		cdsp0-thermal {
> +			polling-delay-passive = <10>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&tsens2 4>;
> +
> +			trips {
> +				thermal-engine-config {
> +					temperature = <125000>;
> +					hysteresis = <1000>;
> +					type = "passive";
> +				};
> +
> +				thermal-hal-config {
> +					temperature = <125000>;
> +					hysteresis = <1000>;
> +					type = "passive";
> +				};
> +
> +				reset-mon-config {
> +					temperature = <115000>;
> +					hysteresis = <5000>;
> +					type = "passive";
> +				};
> +
> +				cdsp0_junction_config: junction-config {
> +					temperature = <95000>;
> +					hysteresis = <5000>;
> +					type = "passive";
> +				};
> +			};
> +		};
> +
> +		cdsp1-thermal {
> +			polling-delay-passive = <10>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&tsens2 5>;
> +
> +			trips {
> +				thermal-engine-config {
> +					temperature = <125000>;
> +					hysteresis = <1000>;
> +					type = "passive";
> +				};
> +
> +				thermal-hal-config {
> +					temperature = <125000>;
> +					hysteresis = <1000>;
> +					type = "passive";
> +				};
> +
> +				reset-mon-config {
> +					temperature = <115000>;
> +					hysteresis = <5000>;
> +					type = "passive";
> +				};
> +
> +				cdsp1_junction_config: junction-config {
> +					temperature = <95000>;
> +					hysteresis = <5000>;
> +					type = "passive";
> +				};
> +			};
> +		};
> +
> +		cdsp2-thermal {
> +			polling-delay-passive = <10>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&tsens2 6>;
> +
> +			trips {
> +				thermal-engine-config {
> +					temperature = <125000>;
> +					hysteresis = <1000>;
> +					type = "passive";
> +				};
> +
> +				thermal-hal-config {
> +					temperature = <125000>;
> +					hysteresis = <1000>;
> +					type = "passive";
> +				};
> +
> +				reset-mon-config {
> +					temperature = <115000>;
> +					hysteresis = <5000>;
> +					type = "passive";
> +				};
> +
> +				cdsp2_junction_config: junction-config {
> +					temperature = <95000>;
> +					hysteresis = <5000>;
> +					type = "passive";
> +				};
> +			};
> +		};
> +
> +		cdsp3-thermal {
> +			polling-delay-passive = <10>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&tsens2 7>;
> +
> +			trips {
> +				thermal-engine-config {
> +					temperature = <125000>;
> +					hysteresis = <1000>;
> +					type = "passive";
> +				};
> +
> +				thermal-hal-config {
> +					temperature = <125000>;
> +					hysteresis = <1000>;
> +					type = "passive";
> +				};
> +
> +				reset-mon-config {
> +					temperature = <115000>;
> +					hysteresis = <5000>;
> +					type = "passive";
> +				};
> +
> +				cdsp3_junction_config: junction-config {
> +					temperature = <95000>;
> +					hysteresis = <5000>;
> +					type = "passive";
> +				};
> +			};
> +		};
> +
> +		video-thermal {
> +			polling-delay-passive = <0>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&tsens1 8>;
> +
> +			trips {
> +				thermal-engine-config {
> +					temperature = <125000>;
> +					hysteresis = <1000>;
> +					type = "passive";
> +				};
> +
> +				reset-mon-config {
> +					temperature = <115000>;
> +					hysteresis = <5000>;
> +					type = "passive";
> +				};
> +			};
> +		};
> +
> +		mem-thermal {
> +			polling-delay-passive = <10>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&tsens1 9>;
> +
> +			trips {
> +				thermal-engine-config {
> +					temperature = <125000>;
> +					hysteresis = <1000>;
> +					type = "passive";
> +				};
> +
> +				ddr_config0: ddr0-config {
> +					temperature = <90000>;
> +					hysteresis = <5000>;
> +					type = "passive";
> +				};
> +
> +				reset-mon-config {
> +					temperature = <115000>;
> +					hysteresis = <5000>;
> +					type = "passive";
> +				};
> +			};
> +		};
> +
> +		modem0-thermal {
> +			polling-delay-passive = <0>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&tsens1 10>;
> +
> +			trips {
> +				thermal-engine-config {
> +					temperature = <125000>;
> +					hysteresis = <1000>;
> +					type = "passive";
> +				};
> +
> +				mdmss0_config0: mdmss0-config0 {
> +					temperature = <102000>;
> +					hysteresis = <3000>;
> +					type = "passive";
> +				};
> +
> +				mdmss0_config1: mdmss0-config1 {
> +					temperature = <105000>;
> +					hysteresis = <3000>;
> +					type = "passive";
> +				};
> +
> +				reset-mon-config {
> +					temperature = <115000>;
> +					hysteresis = <5000>;
> +					type = "passive";
> +				};
> +			};
> +		};
> +
> +		modem1-thermal {
> +			polling-delay-passive = <0>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&tsens1 11>;
> +
> +			trips {
> +				thermal-engine-config {
> +					temperature = <125000>;
> +					hysteresis = <1000>;
> +					type = "passive";
> +				};
> +
> +				mdmss1_config0: mdmss1-config0 {
> +					temperature = <102000>;
> +					hysteresis = <3000>;
> +					type = "passive";
> +				};
> +
> +				mdmss1_config1: mdmss1-config1 {
> +					temperature = <105000>;
> +					hysteresis = <3000>;
> +					type = "passive";
> +				};
> +
> +				reset-mon-config {
> +					temperature = <115000>;
> +					hysteresis = <5000>;
> +					type = "passive";
> +				};
> +			};
> +		};
> +
> +		modem2-thermal {
> +			polling-delay-passive = <0>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&tsens1 12>;
> +
> +			trips {
> +				thermal-engine-config {
> +					temperature = <125000>;
> +					hysteresis = <1000>;
> +					type = "passive";
> +				};
> +
> +				mdmss2_config0: mdmss2-config0 {
> +					temperature = <102000>;
> +					hysteresis = <3000>;
> +					type = "passive";
> +				};
> +
> +				mdmss2_config1: mdmss2-config1 {
> +					temperature = <105000>;
> +					hysteresis = <3000>;
> +					type = "passive";
> +				};
> +
> +				reset-mon-config {
> +					temperature = <115000>;
> +					hysteresis = <5000>;
> +					type = "passive";
> +				};
> +			};
> +		};
> +
> +		modem3-thermal {
> +			polling-delay-passive = <0>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&tsens1 13>;
> +
> +			trips {
> +				thermal-engine-config {
> +					temperature = <125000>;
> +					hysteresis = <1000>;
> +					type = "passive";
> +				};
> +
> +				mdmss3_config0: mdmss3-config0 {
> +					temperature = <102000>;
> +					hysteresis = <3000>;
> +					type = "passive";
> +				};
> +
> +				mdmss3_config1: mdmss3-config1 {
> +					temperature = <105000>;
> +					hysteresis = <3000>;
> +					type = "passive";
> +				};
> +
> +				reset-mon-config {
> +					temperature = <115000>;
> +					hysteresis = <5000>;
> +					type = "passive";
> +				};
> +			};
> +		};
> +
> +		camera0-thermal {
> +			polling-delay-passive = <0>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&tsens1 14>;
> +
> +			trips {
> +				thermal-engine-config {
> +					temperature = <125000>;
> +					hysteresis = <1000>;
> +					type = "passive";
> +				};
> +
> +				reset-mon-config {
> +					temperature = <115000>;
> +					hysteresis = <5000>;
> +					type = "passive";
> +				};
> +			};
> +		};
> +
> +		camera1-thermal {
> +			polling-delay-passive = <0>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&tsens1 15>;
> +
> +			trips {
> +				thermal-engine-config {
> +					temperature = <125000>;
> +					hysteresis = <1000>;
> +					type = "passive";
> +				};
> +
> +				reset-mon-config {
> +					temperature = <115000>;
> +					hysteresis = <5000>;
> +					type = "passive";
> +				};
> +			};
> +		};
> +
> +		aoss2-thermal {
> +			polling-delay-passive = <0>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&tsens2 0>;
> +
> +			trips {
> +				thermal-engine-config {
> +					temperature = <125000>;
> +					hysteresis = <1000>;
> +					type = "passive";
> +				};
> +
> +				reset-mon-config {
> +					temperature = <115000>;
> +					hysteresis = <5000>;
> +					type = "passive";
> +				};
> +			};
> +		};
> +
> +		gpuss-0-thermal {
> +			polling-delay-passive = <10>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&tsens2 1>;
> +
> +			trips {
> +				thermal-engine-config {
> +					temperature = <125000>;
> +					hysteresis = <1000>;
> +					type = "passive";
> +				};
> +
> +				thermal-hal-config {
> +					temperature = <125000>;
> +					hysteresis = <1000>;
> +					type = "passive";
> +				};
> +
> +				reset-mon-config {
> +					temperature = <115000>;
> +					hysteresis = <5000>;
> +					type = "passive";
> +				};
> +
> +				gpu0_junction_config: junction-config {
> +					temperature = <95000>;
> +					hysteresis = <5000>;
> +					type = "passive";
> +				};
> +			};
> +		};
> +
> +		gpuss-1-thermal {
> +			polling-delay-passive = <10>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&tsens2 2>;
> +
> +			trips {
> +				thermal-engine-config {
> +					temperature = <125000>;
> +					hysteresis = <1000>;
> +					type = "passive";
> +				};
> +
> +				thermal-hal-config {
> +					temperature = <125000>;
> +					hysteresis = <1000>;
> +					type = "passive";
> +				};
> +
> +				reset-mon-config {
> +					temperature = <115000>;
> +					hysteresis = <5000>;
> +					type = "passive";
> +				};
> +
> +				gpu1_junction_config: junction-config {
> +					temperature = <95000>;
> +					hysteresis = <5000>;
> +					type = "passive";
> +				};
> +			};
> +		};
> +
> +		gpuss-2-thermal {
> +			polling-delay-passive = <10>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&tsens2 3>;
> +
> +			trips {
> +				thermal-engine-config {
> +					temperature = <125000>;
> +					hysteresis = <1000>;
> +					type = "passive";
> +				};
> +
> +				thermal-hal-config {
> +					temperature = <125000>;
> +					hysteresis = <1000>;
> +					type = "passive";
> +				};
> +
> +				reset-mon-config {
> +					temperature = <115000>;
> +					hysteresis = <5000>;
> +					type = "passive";
> +				};
> +
> +				gpu2_junction_config: junction-config {
> +					temperature = <95000>;
> +					hysteresis = <5000>;
> +					type = "passive";
> +				};
> +			};
> +		};
> +
> +		gpuss-3-thermal {
> +			polling-delay-passive = <10>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&tsens2 4>;
> +
> +			trips {
> +				thermal-engine-config {
> +					temperature = <125000>;
> +					hysteresis = <1000>;
> +					type = "passive";
> +				};
> +
> +				thermal-hal-config {
> +					temperature = <125000>;
> +					hysteresis = <1000>;
> +					type = "passive";
> +				};
> +
> +				reset-mon-config {
> +					temperature = <115000>;
> +					hysteresis = <5000>;
> +					type = "passive";
> +				};
> +
> +				gpu3_junction_config: junction-config {
> +					temperature = <95000>;
> +					hysteresis = <5000>;
> +					type = "passive";
> +				};
> +			};
> +		};
> +
> +		gpuss-4-thermal {
> +			polling-delay-passive = <10>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&tsens2 5>;
> +
> +			trips {
> +				thermal-engine-config {
> +					temperature = <125000>;
> +					hysteresis = <1000>;
> +					type = "passive";
> +				};
> +
> +				thermal-hal-config {
> +					temperature = <125000>;
> +					hysteresis = <1000>;
> +					type = "passive";
> +				};
> +
> +				reset-mon-config {
> +					temperature = <115000>;
> +					hysteresis = <5000>;
> +					type = "passive";
> +				};
> +
> +				gpu4_junction_config: junction-config {
> +					temperature = <95000>;
> +					hysteresis = <5000>;
> +					type = "passive";
> +				};
> +			};
> +		};
> +
> +		gpuss-5-thermal {
> +			polling-delay-passive = <10>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&tsens2 6>;
> +
> +			trips {
> +				thermal-engine-config {
> +					temperature = <125000>;
> +					hysteresis = <1000>;
> +					type = "passive";
> +				};
> +
> +				thermal-hal-config {
> +					temperature = <125000>;
> +					hysteresis = <1000>;
> +					type = "passive";
> +				};
> +
> +				reset-mon-config {
> +					temperature = <115000>;
> +					hysteresis = <5000>;
> +					type = "passive";
> +				};
> +
> +				gpu5_junction_config: junction-config {
> +					temperature = <95000>;
> +					hysteresis = <5000>;
> +					type = "passive";
> +				};
> +			};
> +		};
> +
> +		gpuss-6-thermal {
> +			polling-delay-passive = <10>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&tsens2 7>;
> +
> +			trips {
> +				thermal-engine-config {
> +					temperature = <125000>;
> +					hysteresis = <1000>;
> +					type = "passive";
> +				};
> +
> +				thermal-hal-config {
> +					temperature = <125000>;
> +					hysteresis = <1000>;
> +					type = "passive";
> +				};
> +
> +				reset-mon-config {
> +					temperature = <115000>;
> +					hysteresis = <5000>;
> +					type = "passive";
> +				};
> +
> +				gpu6_junction_config: junction-config {
> +					temperature = <95000>;
> +					hysteresis = <5000>;
> +					type = "passive";
> +				};
> +			};
> +		};
> +
> +		gpuss-7-thermal {
> +			polling-delay-passive = <10>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&tsens2 8>;
> +
> +			trips {
> +				thermal-engine-config {
> +					temperature = <125000>;
> +					hysteresis = <1000>;
> +					type = "passive";
> +				};
> +
> +				thermal-hal-config {
> +					temperature = <125000>;
> +					hysteresis = <1000>;
> +					type = "passive";
> +				};
> +
> +				reset-mon-config {
> +					temperature = <115000>;
> +					hysteresis = <5000>;
> +					type = "passive";
> +				};
> +
> +				gpu7_junction_config: junction-config {
> +					temperature = <95000>;
> +					hysteresis = <5000>;
> +					type = "passive";
> +				};
> +			};
> +		};
> +	};
> +
> +	timer {
> +		compatible = "arm,armv8-timer";
> +		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
> +			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
> +			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
> +			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
> +	};
> +};



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux