From: Dave Gerlach <d-gerlach@xxxxxx> Add documentation for the lpm region which tells the ti-sci driver where to load the FS Stub low power mode firmware and also the firmware-name which tells the driver which binary to load. Both of these are optional for normal system operation but required to enabled suspend-to-mem usage of Deep Sleep state. Signed-off-by: Dave Gerlach <d-gerlach@xxxxxx> Signed-off-by: Vibhore Vardhan <vibhore@xxxxxx> Signed-off-by: Georgi Vlaev <g-vlaev@xxxxxx> Reviewed-by: Rob Herring <robh@xxxxxxxxxx> --- .../bindings/arm/keystone/ti,sci.yaml | 21 +++++++++++++++---- 1 file changed, 17 insertions(+), 4 deletions(-) diff --git a/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml b/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml index 34f5f877d444..4c5213de24bc 100644 --- a/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml +++ b/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml @@ -42,12 +42,19 @@ properties: - const: ti,am654-sci reg-names: - description: | - Specifies the debug messages memory mapped region that is optionally - made available from TI-SCI controller. - const: debug_messages + items: + - const: debug_messages + - const: lpm + minItems: 1 reg: + items: + - description: | + Specifies the debug messages memory mapped region that is optionally + made available from TI-SCI controller. + - description: | + Specifies the lpm memory mapped region where the FS Stub low power + firmware is to be loaded. minItems: 1 mbox-names: @@ -83,6 +90,12 @@ properties: type: object $ref: /schemas/reset/ti,sci-reset.yaml# + firmware-name: + description: | + Name of binary of FS Stub low power firmware located on the + firmware search path. + $ref: /schemas/types.yaml#/definitions/string + required: - compatible - mbox-names -- 2.30.2