This "NPU" is very similar to the Vivante GPUs and Etnaviv works well
with it with just a few small changes.
v2: Add reference to RESET_NNA (Neil)
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@xxxxxxxxxxxxx>
---
arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi | 11 +++++++++++
.../boot/dts/amlogic/meson-g12b-a311d-khadas-vim3.dts | 4 ++++
2 files changed, 15 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
index 45947c1031c4..aaa629816e41 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
@@ -11,6 +11,7 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/reset/amlogic,meson-g12a-reset.h>
#include <dt-bindings/thermal/thermal.h>
+#include <dt-bindings/power/meson-g12a-power.h>
/ {
interrupt-parent = <&gic>;
@@ -2484,4 +2485,14 @@ xtal: xtal-clk {
#clock-cells = <0>;
};
+ npu: npu@ff100000 {
+ compatible = "vivante,gc";
+ reg = <0x0 0xff100000 0x0 0x20000>;
+ interrupts = <0 147 4>;
+ clocks = <&clkc CLKID_NNA_CORE_CLK>,
+ <&clkc CLKID_NNA_AXI_CLK>;
+ clock-names = "core", "bus";
+ resets = <&reset RESET_NNA>;
+ power-domains = <&pwrc PWRC_G12A_NNA_ID>;
+ };
};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-khadas-vim3.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-khadas-vim3.dts
index 124a80901084..73f3d87dcefd 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-khadas-vim3.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-khadas-vim3.dts
@@ -15,6 +15,10 @@ / {
compatible = "khadas,vim3", "amlogic,a311d", "amlogic,g12b";
};
+&npu {
+ status = "okay";
+};
+
/*
* The VIM3 on-board MCU can mux the PCIe/USB3.0 shared differential
* lines using a FUSB340TMX USB 3.1 SuperSpeed Data Switch between
--
2.38.1
