On some SoCs the System CIRQ register layout is slightly different, as there are more registers per function and in some cases other differences later in the layout: this is seen on at least MT8192, but it's also valid for some other "contemporary" SoCs both for Chromebooks and for smartphones. Add the new "v2" register layout and use it if the compatible "mediatek,mt8192-cirq" is found. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx> --- drivers/irqchip/irq-mtk-cirq.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/drivers/irqchip/irq-mtk-cirq.c b/drivers/irqchip/irq-mtk-cirq.c index 4776ed6492fb..76bc0283e3b9 100644 --- a/drivers/irqchip/irq-mtk-cirq.c +++ b/drivers/irqchip/irq-mtk-cirq.c @@ -39,6 +39,18 @@ static const u32 mtk_cirq_regoffs_v1[] = { [CIRQ_CONTROL] = 0x300, }; +static const u32 mtk_cirq_regoffs_v2[] = { + [CIRQ_STA] = 0x0, + [CIRQ_ACK] = 0x80, + [CIRQ_MASK_SET] = 0x180, + [CIRQ_MASK_CLR] = 0x200, + [CIRQ_SENS_SET] = 0x300, + [CIRQ_SENS_CLR] = 0x380, + [CIRQ_POL_SET] = 0x480, + [CIRQ_POL_CLR] = 0x500, + [CIRQ_CONTROL] = 0x600, +}; + #define CIRQ_EN 0x1 #define CIRQ_EDGE 0x2 #define CIRQ_FLUSH 0x4 @@ -277,6 +289,7 @@ static const struct of_device_id mtk_cirq_of_match[] = { { .compatible = "mediatek,mt2701-cirq", .data = &mtk_cirq_regoffs_v1 }, { .compatible = "mediatek,mt8135-cirq", .data = &mtk_cirq_regoffs_v1 }, { .compatible = "mediatek,mt8173-cirq", .data = &mtk_cirq_regoffs_v1 }, + { .compatible = "mediatek,mt8192-cirq", .data = &mtk_cirq_regoffs_v2 }, { /* sentinel */ } }; -- 2.38.1