Hi Sebastian,
On 11/24/22 15:49, Sebastian Reichel wrote:
> From: Kever Yang <kever.yang@xxxxxxxxxxxxxx>
>
> Add board file for the RK3588 evaluation board. While the hardware
> offers plenty of peripherals and connectivity this basic implementation
> just handles things required to successfully boot Linux from eMMC,
> connect via UART or Ethernet.
>
> Signed-off-by: Kever Yang <kever.yang@xxxxxxxxxxxxxx>
> [rebase, update commit message, use EVB1 for SoC bringup]
> Signed-off-by: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
> ---
> arch/arm64/boot/dts/rockchip/Makefile | 1 +
> .../boot/dts/rockchip/rk3588-evb1-v10.dts | 156 ++++++++++++++++++
> 2 files changed, 157 insertions(+)
> create mode 100644 arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts
>
> diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
> index 8c15593c0ca4..12ed53de11eb 100644
> --- a/arch/arm64/boot/dts/rockchip/Makefile
> +++ b/arch/arm64/boot/dts/rockchip/Makefile
> @@ -72,3 +72,4 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-soquartz-cm4.dtb
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-bpi-r2-pro.dtb
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-evb1-v10.dtb
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-rock-3a.dtb
> +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-evb1-v10.dtb
> diff --git a/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts b/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts
> new file mode 100644
> index 000000000000..d43d70228d3b
> --- /dev/null
> +++ b/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts
> @@ -0,0 +1,156 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2021 Rockchip Electronics Co., Ltd.
> + *
> + */
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/pinctrl/rockchip.h>
> +#include "rk3588.dtsi"
> +
> +/ {
> + model = "Rockchip RK3588 EVB1 V10 Board";
> + compatible = "rockchip,rk3588-evb1-v10", "rockchip,rk3588";
> +
> + aliases {
> + mmc0 = &sdhci;
> + serial2 = &uart2;
> + };
> +
> + chosen {
> + stdout-path = "serial2:1500000n8";
> + };
> +
> + backlight: backlight {
> + compatible = "pwm-backlight";
> + brightness-levels = <
> + 0 20 20 21 21 22 22 23
> + 23 24 24 25 25 26 26 27
> + 27 28 28 29 29 30 30 31
> + 31 32 32 33 33 34 34 35
> + 35 36 36 37 37 38 38 39
> + 40 41 42 43 44 45 46 47
> + 48 49 50 51 52 53 54 55
> + 56 57 58 59 60 61 62 63
> + 64 65 66 67 68 69 70 71
> + 72 73 74 75 76 77 78 79
> + 80 81 82 83 84 85 86 87
> + 88 89 90 91 92 93 94 95
> + 96 97 98 99 100 101 102 103
> + 104 105 106 107 108 109 110 111
> + 112 113 114 115 116 117 118 119
> + 120 121 122 123 124 125 126 127
> + 128 129 130 131 132 133 134 135
> + 136 137 138 139 140 141 142 143
> + 144 145 146 147 148 149 150 151
> + 152 153 154 155 156 157 158 159
> + 160 161 162 163 164 165 166 167
> + 168 169 170 171 172 173 174 175
> + 176 177 178 179 180 181 182 183
> + 184 185 186 187 188 189 190 191
> + 192 193 194 195 196 197 198 199
> + 200 201 202 203 204 205 206 207
> + 208 209 210 211 212 213 214 215
> + 216 217 218 219 220 221 222 223
> + 224 225 226 227 228 229 230 231
> + 232 233 234 235 236 237 238 239
> + 240 241 242 243 244 245 246 247
> + 248 249 250 251 252 253 254 255
> + >;
> + default-brightness-level = <200>;
> +
> + pwms = <&pwm2 0 25000 0>;
> + power-supply = <&vcc12v_dcin>;
> + };
> +
> + vcc12v_dcin: vcc12v-dcin-regulator {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc12v_dcin";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <12000000>;
> + regulator-max-microvolt = <12000000>;
> + };
> +
> + vcc5v0_sys: vcc5v0-sys-regulator {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc5v0_sys";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + vin-supply = <&vcc12v_dcin>;
> + };
> +};
> +
> +&gmac0 {
> + clock_in_out = "output";
> + phy-handle = <&rgmii_phy>;
> + phy-mode = "rgmii-rxid";
> + pinctrl-0 = <&gmac0_miim
> + &gmac0_tx_bus2
> + &gmac0_rx_bus2
> + &gmac0_rgmii_clk
> + &gmac0_rgmii_bus>;
> + pinctrl-names = "default";
> + rx_delay = <0x00>;
> + tx_delay = <0x43>;
> + status = "okay";
> +};
> +
> +&i2c2 {
> + status = "okay";
> +
> + hym8563: rtc@51 {
> + compatible = "haoyu,hym8563";
> + reg = <0x51>;
> + #clock-cells = <0>;
> + clock-output-names = "hym8563";
> + pinctrl-names = "default";
> + pinctrl-0 = <&hym8563_int>;
> + interrupt-parent = <&gpio0>;
> + interrupts = <RK_PD4 IRQ_TYPE_LEVEL_LOW>;
> + wakeup-source;
> + };
> +};
> +
> +&mdio0 {
> + rgmii_phy: ethernet-phy@1 {
> + /* RTL8211F */
> + compatible = "ethernet-phy-ieee802.3-c22";
> + reg = <0x1>;
> + reset-assert-us = <20000>;
> + reset-deassert-us = <100000>;
> + reset-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_LOW>;
No pinctrl required for this pin?
With this addressed:
Reviewed-by: Michael Riesch <michael.riesch@xxxxxxxxxxxxxx>
Thanks and best regards,
Michael
> + };
> +};
> +
> +&pinctrl {
> + hym8563 {
> + hym8563_int: hym8563-int {
> + rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>;
> + };
> + };
> +};
> +
> +&pwm2 {
> + status = "okay";
> +};
> +
> +&sdhci {
> + bus-width = <8>;
> + no-sdio;
> + no-sd;
> + non-removable;
> + max-frequency = <200000000>;
> + mmc-hs400-1_8v;
> + mmc-hs400-enhanced-strobe;
> + status = "okay";
> +};
> +
> +&uart2 {
> + pinctrl-0 = <&uart2m0_xfer>;
> + status = "okay";
> +};
