Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> writes:
> The node names should be generic and DT schema expects certain pattern:
>
> armada-370-seagate-personal-cloud.dtb: gpio-leds: 'red-sata0' does not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
Applied on mvebu/dt
Thanks,
Gregory
> ---
> arch/arm/boot/dts/armada-370-dlink-dns327l.dts | 6 +++---
> arch/arm/boot/dts/armada-370-seagate-nas-4bay.dts | 4 ++--
> arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi | 8 ++++----
> arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi | 2 +-
> arch/arm/boot/dts/armada-385-linksys-caiman.dts | 4 ++--
> arch/arm/boot/dts/armada-385-linksys-cobra.dts | 4 ++--
> arch/arm/boot/dts/armada-385-linksys-rango.dts | 8 ++++----
> arch/arm/boot/dts/armada-385-linksys-shelby.dts | 4 ++--
> arch/arm/boot/dts/armada-385-linksys.dtsi | 4 ++--
> arch/arm/boot/dts/armada-385-synology-ds116.dts | 2 +-
> arch/arm/boot/dts/armada-xp-linksys-mamba.dts | 2 +-
> 11 files changed, 24 insertions(+), 24 deletions(-)
>
> diff --git a/arch/arm/boot/dts/armada-370-dlink-dns327l.dts b/arch/arm/boot/dts/armada-370-dlink-dns327l.dts
> index 2008c6eaaa52..561195b749eb 100644
> --- a/arch/arm/boot/dts/armada-370-dlink-dns327l.dts
> +++ b/arch/arm/boot/dts/armada-370-dlink-dns327l.dts
> @@ -86,19 +86,19 @@ &sata_l_white_pin
>
> pinctrl-names = "default";
>
> - sata-r-amber-pin {
> + led-sata-r-amber {
> label = "dns327l:amber:sata-r";
> gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>;
> default-state = "keep";
> };
>
> - sata-l-amber-pin {
> + led-sata-l-amber {
> label = "dns327l:amber:sata-l";
> gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
> default-state = "keep";
> };
>
> - backup-led-pin {
> + led-backup {
> label = "dns327l:white:usb";
> gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
> default-state = "keep";
> diff --git a/arch/arm/boot/dts/armada-370-seagate-nas-4bay.dts b/arch/arm/boot/dts/armada-370-seagate-nas-4bay.dts
> index 3cf70c72c5ca..9cb69999b1db 100644
> --- a/arch/arm/boot/dts/armada-370-seagate-nas-4bay.dts
> +++ b/arch/arm/boot/dts/armada-370-seagate-nas-4bay.dts
> @@ -72,11 +72,11 @@ regulator@4 {
> };
>
> gpio-leds {
> - red-sata2 {
> + led-red-sata2 {
> label = "dart:red:sata2";
> gpios = <&pca9554 0 GPIO_ACTIVE_LOW>;
> };
> - red-sata3 {
> + led-red-sata3 {
> label = "dart:red:sata3";
> gpios = <&pca9554 3 GPIO_ACTIVE_LOW>;
> };
> diff --git a/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi b/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi
> index 866b8630d407..822f10734946 100644
> --- a/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi
> +++ b/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi
> @@ -132,21 +132,21 @@ button-reset {
> gpio-leds {
> compatible = "gpio-leds";
>
> - white-power {
> + led-white-power {
> label = "dart:white:power";
> gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
> linux,default-trigger = "timer";
>
> };
> - red-power {
> + led-red-power {
> label = "dart:red:power";
> gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
> };
> - red-sata0 {
> + led-red-sata0 {
> label = "dart:red:sata0";
> gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
> };
> - red-sata1 {
> + led-red-sata1 {
> label = "dart:red:sata1";
> gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
> };
> diff --git a/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi b/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi
> index 702a85af2078..124a8ba279e3 100644
> --- a/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi
> +++ b/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi
> @@ -107,7 +107,7 @@ button-usb {
> gpio-leds {
> compatible = "gpio-leds";
>
> - red-sata0 {
> + led-red-sata0 {
> label = "cumulus:red:sata0";
> gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
> default-state = "off";
> diff --git a/arch/arm/boot/dts/armada-385-linksys-caiman.dts b/arch/arm/boot/dts/armada-385-linksys-caiman.dts
> index a03050c97084..88b2921fed55 100644
> --- a/arch/arm/boot/dts/armada-385-linksys-caiman.dts
> +++ b/arch/arm/boot/dts/armada-385-linksys-caiman.dts
> @@ -62,11 +62,11 @@ wps_amber@9 {
> };
>
> &gpio_leds {
> - power {
> + led-power {
> label = "caiman:white:power";
> };
>
> - sata {
> + led-sata {
> label = "caiman:white:sata";
> };
> };
> diff --git a/arch/arm/boot/dts/armada-385-linksys-cobra.dts b/arch/arm/boot/dts/armada-385-linksys-cobra.dts
> index e3e4877a6f49..88200f930d0d 100644
> --- a/arch/arm/boot/dts/armada-385-linksys-cobra.dts
> +++ b/arch/arm/boot/dts/armada-385-linksys-cobra.dts
> @@ -62,11 +62,11 @@ wps_amber@9 {
> };
>
> &gpio_leds {
> - power {
> + led-power {
> label = "cobra:white:power";
> };
>
> - sata {
> + led-sata {
> label = "cobra:white:sata";
> };
> };
> diff --git a/arch/arm/boot/dts/armada-385-linksys-rango.dts b/arch/arm/boot/dts/armada-385-linksys-rango.dts
> index 3c4af57ec2b9..4ab45f294de2 100644
> --- a/arch/arm/boot/dts/armada-385-linksys-rango.dts
> +++ b/arch/arm/boot/dts/armada-385-linksys-rango.dts
> @@ -54,22 +54,22 @@ wps_amber@9 {
> };
>
> &gpio_leds {
> - power {
> + led-power {
> gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
> label = "rango:white:power";
> };
>
> - sata {
> + led-sata {
> gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
> label = "rango:white:sata";
> };
>
> - wlan_2g {
> + led-wlan_2g {
> gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
> label = "rango:white:wlan_2g";
> };
>
> - wlan_5g {
> + led-wlan_5g {
> gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
> label = "rango:white:wlan_5g";
> };
> diff --git a/arch/arm/boot/dts/armada-385-linksys-shelby.dts b/arch/arm/boot/dts/armada-385-linksys-shelby.dts
> index 3451cd3e5dff..f1b1f22413f1 100644
> --- a/arch/arm/boot/dts/armada-385-linksys-shelby.dts
> +++ b/arch/arm/boot/dts/armada-385-linksys-shelby.dts
> @@ -62,11 +62,11 @@ wps_amber@9 {
> };
>
> &gpio_leds {
> - power {
> + led-power {
> label = "shelby:white:power";
> };
>
> - sata {
> + led-sata {
> label = "shelby:white:sata";
> };
> };
> diff --git a/arch/arm/boot/dts/armada-385-linksys.dtsi b/arch/arm/boot/dts/armada-385-linksys.dtsi
> index 116aca5e688f..85e8d966f6c1 100644
> --- a/arch/arm/boot/dts/armada-385-linksys.dtsi
> +++ b/arch/arm/boot/dts/armada-385-linksys.dtsi
> @@ -71,12 +71,12 @@ gpio_leds: gpio-leds {
> pinctrl-0 = <&gpio_leds_pins>;
> pinctrl-names = "default";
>
> - power {
> + led-power {
> gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
> default-state = "on";
> };
>
> - sata {
> + led-sata {
> gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
> default-state = "off";
> linux,default-trigger = "disk-activity";
> diff --git a/arch/arm/boot/dts/armada-385-synology-ds116.dts b/arch/arm/boot/dts/armada-385-synology-ds116.dts
> index 2622af73c9da..ea91ff964d94 100644
> --- a/arch/arm/boot/dts/armada-385-synology-ds116.dts
> +++ b/arch/arm/boot/dts/armada-385-synology-ds116.dts
> @@ -149,7 +149,7 @@ gpio-leds {
> * sata0, and accesses to SATA disk 0 make it blink so it
> * doesn't need to be declared here.
> */
> - orange {
> + led-orange {
> gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
> label = "ds116:orange:disk";
> default-state = "off";
> diff --git a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
> index 622ac40dd164..dbe8dfe236fb 100644
> --- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
> +++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
> @@ -195,7 +195,7 @@ gpio-leds {
> pinctrl-0 = <&power_led_pin>;
> pinctrl-names = "default";
>
> - power {
> + led-power {
> label = "mamba:white:power";
> gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
> default-state = "on";
> --
> 2.34.1
>
--
Gregory Clement, Bootlin
Embedded Linux and Kernel engineering
http://bootlin.com
