Re: [PATCH] ARM: dts: turris-omnia: Add switch port 6 node

[Gregory CLEMENT <gregory.clement@xxxxxxxxxxx>]

Pali Rohár <pali@xxxxxxxxxx> writes:

> Switch port 6 is connected to eth0, so add appropriate device tree node for it.
>
> Fixes: 26ca8b52d6e1 ("ARM: dts: add support for Turris Omnia")
> Signed-off-by: Pali Rohár <pali@xxxxxxxxxx>

Applied on mvebu/dt

Thanks,

Gregory
> ---
>  arch/arm/boot/dts/armada-385-turris-omnia.dts | 12 +++++++++++-
>  1 file changed, 11 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/armada-385-turris-omnia.dts b/arch/arm/boot/dts/armada-385-turris-omnia.dts
> index f655e9229d68..8215ffb6a795 100644
> --- a/arch/arm/boot/dts/armada-385-turris-omnia.dts
> +++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts
> @@ -463,7 +463,17 @@
>  				};
>  			};
>  
> -			/* port 6 is connected to eth0 */
> +			ports@6 {
> +				reg = <6>;
> +				label = "cpu";
> +				ethernet = <&eth0>;
> +				phy-mode = "rgmii-id";
> +
> +				fixed-link {
> +					speed = <1000>;
> +					full-duplex;
> +				};
> +			};
>  		};
>  	};
>  };
> -- 
> 2.20.1
>

-- 
Gregory Clement, Bootlin
Embedded Linux and Kernel engineering
http://bootlin.com