From: Julian Goldsmith <julian@xxxxxxxxxxxxxxxxxxx> OnePlus One is a smartphone launched in 2014 and is based on the Snapdragon 801 SoC (-AC variant). Supported features: * ADSP * Charger * Coincell charger * Fuel gauge * Internal storage * Touchscreen * UART * USB * Wifi/Bluetooth Signed-off-by: Julian Goldsmith <julian@xxxxxxxxxxxxxxxxxxx> Co-developed-by: Oleg Chernovskiy <kanedias@xxxxxxxxxx> Signed-off-by: Oleg Chernovskiy <kanedias@xxxxxxxxxx> Co-developed-by: Luca Weiss <luca@xxxxxxxxx> Signed-off-by: Luca Weiss <luca@xxxxxxxxx> --- arch/arm/boot/dts/Makefile | 1 + .../dts/qcom-msm8974pro-oneplus-bacon.dts | 419 ++++++++++++++++++ 2 files changed, 420 insertions(+) create mode 100644 arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 90bb9866cc88..3c76e3e4785b 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -1064,6 +1064,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \ qcom-msm8974-sony-xperia-rhine-amami.dtb \ qcom-msm8974-sony-xperia-rhine-honami.dtb \ qcom-msm8974pro-fairphone-fp2.dtb \ + qcom-msm8974pro-oneplus-bacon.dtb \ qcom-msm8974pro-samsung-klte.dtb \ qcom-msm8974pro-sony-xperia-shinano-castor.dtb \ qcom-mdm9615-wp8548-mangoh-green.dtb \ diff --git a/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts b/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts new file mode 100644 index 000000000000..1d1805983d95 --- /dev/null +++ b/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts @@ -0,0 +1,419 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "qcom-msm8974pro.dtsi" +#include "qcom-pm8841.dtsi" +#include "qcom-pm8941.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> + +/ { + model = "OnePlus One"; + compatible = "oneplus,bacon", "qcom,msm8974"; + chassis-type = "handset"; + qcom,msm-id = <194 0x10000>; + qcom,board-id = <8 0>; + + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&blsp1_i2c1 { + status = "okay"; + + fuel-gauge@55 { + compatible = "ti,bq27541"; + reg = <0x55>; + power-supplies = <&bq24196_charger>; + }; +}; + +&blsp1_i2c2 { + status = "okay"; + + rmi4-i2c-dev@20 { + compatible = "syna,rmi4-i2c"; + reg = <0x20>; + + syna,startup-delay-ms = <100>; + + interrupts-extended = <&tlmm 61 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&pm8941_l22>; + vio-supply = <&pm8941_lvs3>; + + pinctrl-names = "default"; + pinctrl-0 = <&touch_default_state>; + + #address-cells = <1>; + #size-cells = <0>; + + rmi4-f01@1 { + reg = <0x1>; + syna,nosleep-mode = <1>; + }; + + rmi4-f12@12 { + reg = <0x12>; + syna,sensor-type = <1>; + /* + * Touchscreen size is 2040x1080, y-values between + * 1920-2040 are used for touchkey (menu, home & back). + * For now clip it off so we don't get touch events + * outside of the display area. + */ + syna,clip-y-high = <1920>; + }; + }; +}; + +&blsp1_i2c6 { + status = "okay"; + + bq24196_charger: charger@6b { + compatible = "ti,bq24196"; + reg = <0x6b>; + interrupts-extended = <&tlmm 31 IRQ_TYPE_EDGE_FALLING>; + omit-battery-class; + }; +}; + +&blsp1_uart2 { + status = "okay"; +}; + +&gcc { + compatible = "qcom,gcc-msm8974pro-ac"; +}; + +&otg { + phys = <&usb_hs1_phy>; + phy-select = <&tcsr 0xb000 0>; + extcon = <&smbb>, <&usb_id>; + vbus-supply = <&chg_otg>; + + hnp-disable; + srp-disable; + adp-disable; + + status = "okay"; + + ulpi { + phy@a { + status = "okay"; + + v1p8-supply = <&pm8941_l6>; + v3p3-supply = <&pm8941_l24>; + + extcon = <&smbb>; + qcom,init-seq = /bits/ 8 <0x1 0x64>; + }; + }; +}; + +&pm8941_coincell { + qcom,rset-ohms = <800>; + qcom,vset-millivolts = <3200>; + + status = "okay"; +}; + +&pronto { + vddmx-supply = <&pm8841_s1>; + vddcx-supply = <&pm8841_s2>; + vddpx-supply = <&pm8941_s3>; + + pinctrl-names = "default"; + pinctrl-0 = <&wcnss_pin_a>; + + status = "okay"; + + iris { + vddxo-supply = <&pm8941_l6>; + vddrfa-supply = <&pm8941_l11>; + vddpa-supply = <&pm8941_l19>; + vdddig-supply = <&pm8941_s3>; + }; + + smd-edge { + qcom,remote-pid = <4>; + label = "pronto"; + + wcnss { + status = "okay"; + }; + }; +}; + +&remoteproc_adsp { + cx-supply = <&pm8841_s2>; + + status = "okay"; +}; + +&rpm_requests { + regulators-0 { + compatible = "qcom,rpm-pm8841-regulators"; + + pm8841_s1: s1 { + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <1050000>; + }; + + pm8841_s2: s2 { + regulator-min-microvolt = <875000>; + regulator-max-microvolt = <1050000>; + regulator-always-on; + }; + + pm8841_s3: s3 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; + }; + + regulators-1 { + compatible = "qcom,rpm-pm8941-regulators"; + + vdd_l1_l3-supply = <&pm8941_s1>; + vdd_l2_lvs1_2_3-supply = <&pm8941_s3>; + vdd_l4_l11-supply = <&pm8941_s1>; + vdd_l5_l7-supply = <&pm8941_s2>; + vdd_l6_l12_l14_l15-supply = <&pm8941_s2>; + vdd_l8_l16_l18_l19-supply = <&vreg_vph_pwr>; + vdd_l9_l10_l17_l22-supply = <&vreg_boost>; + vdd_l13_l20_l23_l24-supply = <&vreg_boost>; + vdd_l21-supply = <&vreg_boost>; + + pm8941_s1: s1 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + + regulator-always-on; + regulator-boot-on; + }; + + pm8941_s2: s2 { + regulator-min-microvolt = <2150000>; + regulator-max-microvolt = <2150000>; + + regulator-boot-on; + }; + + pm8941_s3: s3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-system-load = <154000>; + + regulator-always-on; + regulator-boot-on; + regulator-allow-set-load; + }; + + pm8941_l1: l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + + regulator-always-on; + regulator-boot-on; + }; + + pm8941_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8941_l3: l3 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + pm8941_l4: l4 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + pm8941_l5: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-boot-on; + }; + + pm8941_l7: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-boot-on; + }; + + pm8941_l8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_l9: l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8941_l10: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8941_l11: l11 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1350000>; + }; + + pm8941_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-always-on; + regulator-boot-on; + regulator-allow-set-load; + }; + + pm8941_l13: l13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + + regulator-boot-on; + }; + + pm8941_l14: l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_l15: l15 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + pm8941_l16: l16 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + pm8941_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8941_l18: l18 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8941_l19: l19 { + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <3350000>; + }; + + pm8941_l20: l20 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + + regulator-system-load = <200000>; + regulator-allow-set-load; + regulator-boot-on; + }; + + pm8941_l21: l21 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + + regulator-boot-on; + }; + + pm8941_l22: l22 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-allow-set-load; + }; + + pm8941_l23: l23 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + pm8941_l24: l24 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + + regulator-boot-on; + }; + + pm8941_lvs3: lvs3 {}; + }; +}; + +&sdhc_1 { + vmmc-supply = <&pm8941_l20>; + vqmmc-supply = <&pm8941_s3>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_on>; + pinctrl-1 = <&sdc1_off>; + + status = "okay"; +}; + +&tlmm { + sdc1_on: sdc1-on-state { + clk-pins { + pins = "sdc1_clk"; + drive-strength = <4>; + bias-disable; + }; + + cmd-data-pins { + pins = "sdc1_cmd", "sdc1_data"; + drive-strength = <4>; + bias-pull-up; + }; + }; + + touch_default_state: touch-default-state { + int-pins { + pins = "gpio61"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + input-enable; + }; + + reset-pins { + pins = "gpio60"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + wcnss_pin_a: wcnss-pin-active-state { + wlan-pins { + pins = "gpio36", "gpio37", "gpio38", "gpio39", "gpio40"; + function = "wlan"; + drive-strength = <6>; + bias-pull-down; + }; + + bt-pins { + pins = "gpio35", "gpio43", "gpio44"; + function = "bt"; + drive-strength = <2>; + bias-pull-down; + }; + }; +}; -- 2.38.1