On Sun, 27 Nov 2022 15:31:36 +0800, Icenowy Zheng wrote: > The Genesys Logic GL850G is a USB 2.0 Single TT hub controller that > features 4 downstream ports, an internal 5V-to-3.3V LDO regulator (can > be bypassed) and an external reset pin. > > Add a device tree binding for its USB protocol part. The internal LDO is > not covered by this and can just be modelled as a fixed regulator. > > Signed-off-by: Icenowy Zheng <uwu@xxxxxxxxxx> > --- > .../bindings/usb/genesys,gl850g.yaml | 48 +++++++++++++++++++ > 1 file changed, 48 insertions(+) > create mode 100644 Documentation/devicetree/bindings/usb/genesys,gl850g.yaml > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: ./Documentation/devicetree/bindings/usb/genesys,gl850g.yaml: $id: relative path/filename doesn't match actual path or filename expected: http://devicetree.org/schemas/usb/genesys,gl850g.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/usb/realtek,rts5411.yaml: duplicate '$id' value 'http://devicetree.org/schemas/usb/realtek,rts5411.yaml#' Error: Documentation/devicetree/bindings/usb/genesys,gl850g.example.dts:26.41-42 syntax error FATAL ERROR: Unable to parse input tree make[1]: *** [scripts/Makefile.lib:406: Documentation/devicetree/bindings/usb/genesys,gl850g.example.dtb] Error 1 make[1]: *** Waiting for unfinished jobs.... make: *** [Makefile:1492: dt_binding_check] Error 2 doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20221127073140.2093897-3-uwu@xxxxxxxxxx This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command.
