R528 and T113 are SoCs based on the same design as D1/D1s, but with ARM CPUs instead of RISC-V. They use the same CCU implementation, meaning the CCU has gates/resets for all peripherals present on any SoC in this family. I verified the CAN bus bits are also present on D1/D1s. Patches 1-2 clean up the Kconfig in preparation for patch 3, which allows building the driver. Patches 4-5 add the missing driver bits. András Szemző (1): clk: sunxi-ng: d1: Mark cpux clock as critical Fabien Poussin (1): clk: sunxi-ng: d1: Add CAN bus gates and resets Samuel Holland (3): clk: sunxi-ng: Remove duplicate ARCH_SUNXI dependencies clk: sunxi-ng: Move SoC driver conditions to dependencies clk: sunxi-ng: d1: Allow building for R528/T113 drivers/clk/sunxi-ng/Kconfig | 71 ++++++++++++----------- drivers/clk/sunxi-ng/ccu-sun20i-d1.c | 13 ++++- drivers/clk/sunxi-ng/ccu-sun20i-d1.h | 2 +- include/dt-bindings/clock/sun20i-d1-ccu.h | 2 + include/dt-bindings/reset/sun20i-d1-ccu.h | 2 + 5 files changed, 53 insertions(+), 37 deletions(-) -- 2.37.4
