Re: [PATCH v2 05/12] riscv: dts: allwinner: Add MangoPi MQ devicetree

[Guo Ren <guoren@xxxxxxxxxx>]

Reviewed-by: Guo Ren <guoren@xxxxxxxxxx>

On Sat, Nov 26, 2022 at 7:47 AM Samuel Holland <samuel@xxxxxxxxxxxx> wrote:
>
> The MangoPi MQ is a tiny SBC built around the Allwinner D1s. Its
> onboard peripherals include two USB Type-C ports (1 device, 1 host)
> and RTL8189FTV WLAN.
>
> A MangoPi MQ-R variant of the board also exists. The MQ-R has a
> different form factor, but the onboard peripherals are the same.
>
> Most D1 and D1s boards use a similar power tree, with the 1.8V rail
> powered by the SoC's internal LDOA, analog domains powered by ALDO,
> and the rest of the board powered by always-on fixed regulators. To
> avoid duplication, factor out the regulator information that is
> common across boards.
>
> The board also exposes GPIO Port E via a FPC connector, which can
> support either a camera or an RMII Ethernet PHY. The additional
> regulators supply that connector.
>
> Signed-off-by: Samuel Holland <samuel@xxxxxxxxxxxx>
> ---
>
> Changes in v2:
>  - New patch for v2
>
>  arch/riscv/boot/dts/Makefile                  |   1 +
>  arch/riscv/boot/dts/allwinner/Makefile        |   2 +
>  .../allwinner/sun20i-common-regulators.dtsi   |  35 +++++
>  .../dts/allwinner/sun20i-d1s-mangopi-mq.dts   | 135 ++++++++++++++++++
>  4 files changed, 173 insertions(+)
>  create mode 100644 arch/riscv/boot/dts/allwinner/Makefile
>  create mode 100644 arch/riscv/boot/dts/allwinner/sun20i-common-regulators.dtsi
>  create mode 100644 arch/riscv/boot/dts/allwinner/sun20i-d1s-mangopi-mq.dts
>
> diff --git a/arch/riscv/boot/dts/Makefile b/arch/riscv/boot/dts/Makefile
> index ff174996cdfd..f292e31bdb2c 100644
> --- a/arch/riscv/boot/dts/Makefile
> +++ b/arch/riscv/boot/dts/Makefile
> @@ -1,4 +1,5 @@
>  # SPDX-License-Identifier: GPL-2.0
> +subdir-y += allwinner
>  subdir-y += sifive
>  subdir-y += starfive
>  subdir-$(CONFIG_SOC_CANAAN_K210_DTB_BUILTIN) += canaan
> diff --git a/arch/riscv/boot/dts/allwinner/Makefile b/arch/riscv/boot/dts/allwinner/Makefile
> new file mode 100644
> index 000000000000..2f2792594f7d
> --- /dev/null
> +++ b/arch/riscv/boot/dts/allwinner/Makefile
> @@ -0,0 +1,2 @@
> +# SPDX-License-Identifier: GPL-2.0
> +dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1s-mangopi-mq.dtb
> diff --git a/arch/riscv/boot/dts/allwinner/sun20i-common-regulators.dtsi b/arch/riscv/boot/dts/allwinner/sun20i-common-regulators.dtsi
> new file mode 100644
> index 000000000000..de1adf2a2759
> --- /dev/null
> +++ b/arch/riscv/boot/dts/allwinner/sun20i-common-regulators.dtsi
> @@ -0,0 +1,35 @@
> +// SPDX-License-Identifier: (GPL-2.0+ or MIT)
> +// Copyright (C) 2021-2022 Samuel Holland <samuel@xxxxxxxxxxxx>
> +
> +/ {
> +       reg_vcc: vcc {
> +               compatible = "regulator-fixed";
> +               regulator-name = "vcc";
> +               regulator-min-microvolt = <5000000>;
> +               regulator-max-microvolt = <5000000>;
> +       };
> +
> +       reg_vcc_3v3: vcc-3v3 {
> +               compatible = "regulator-fixed";
> +               regulator-name = "vcc-3v3";
> +               regulator-min-microvolt = <3300000>;
> +               regulator-max-microvolt = <3300000>;
> +               vin-supply = <&reg_vcc>;
> +       };
> +};
> +
> +&pio {
> +       vcc-pb-supply = <&reg_vcc_3v3>;
> +       vcc-pc-supply = <&reg_vcc_3v3>;
> +       vcc-pd-supply = <&reg_vcc_3v3>;
> +       vcc-pe-supply = <&reg_vcc_3v3>;
> +       vcc-pf-supply = <&reg_vcc_3v3>;
> +       vcc-pg-supply = <&reg_vcc_3v3>;
> +};
> +
> +&reg_ldoa {
> +       regulator-always-on;
> +       regulator-min-microvolt = <1800000>;
> +       regulator-max-microvolt = <1800000>;
> +       ldo-in-supply = <&reg_vcc_3v3>;
> +};
> diff --git a/arch/riscv/boot/dts/allwinner/sun20i-d1s-mangopi-mq.dts b/arch/riscv/boot/dts/allwinner/sun20i-d1s-mangopi-mq.dts
> new file mode 100644
> index 000000000000..11b150182490
> --- /dev/null
> +++ b/arch/riscv/boot/dts/allwinner/sun20i-d1s-mangopi-mq.dts
> @@ -0,0 +1,135 @@
> +// SPDX-License-Identifier: (GPL-2.0+ or MIT)
> +// Copyright (C) 2022 Samuel Holland <samuel@xxxxxxxxxxxx>
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/leds/common.h>
> +
> +/dts-v1/;
> +
> +#include "sun20i-d1s.dtsi"
> +#include "sun20i-common-regulators.dtsi"
> +
> +/ {
> +       model = "MangoPi MQ";
> +       compatible = "widora,mangopi-mq", "allwinner,sun20i-d1s";
> +
> +       aliases {
> +               ethernet0 = &rtl8189ftv;
> +               mmc0 = &mmc0;
> +               serial3 = &uart3;
> +       };
> +
> +       chosen {
> +               stdout-path = "serial3:115200n8";
> +       };
> +
> +       leds {
> +               compatible = "gpio-leds";
> +
> +               led-0 {
> +                       color = <LED_COLOR_ID_BLUE>;
> +                       function = LED_FUNCTION_BACKLIGHT;
> +                       gpios = <&pio 3 22 GPIO_ACTIVE_LOW>; /* PD22 */
> +               };
> +       };
> +
> +       reg_avdd2v8: avdd2v8 {
> +               compatible = "regulator-fixed";
> +               regulator-name = "avdd2v8";
> +               regulator-min-microvolt = <2800000>;
> +               regulator-max-microvolt = <2800000>;
> +               vin-supply = <&reg_vcc_3v3>;
> +       };
> +
> +       reg_dvdd: dvdd {
> +               compatible = "regulator-fixed";
> +               regulator-name = "dvdd";
> +               regulator-min-microvolt = <1200000>;
> +               regulator-max-microvolt = <1200000>;
> +               vin-supply = <&reg_vcc_3v3>;
> +       };
> +
> +       reg_vcc_core: vcc-core {
> +               compatible = "regulator-fixed";
> +               regulator-name = "vcc-core";
> +               regulator-min-microvolt = <900000>;
> +               regulator-max-microvolt = <900000>;
> +               vin-supply = <&reg_vcc>;
> +       };
> +
> +       wifi_pwrseq: wifi-pwrseq {
> +               compatible = "mmc-pwrseq-simple";
> +               reset-gpios = <&pio 6 12 GPIO_ACTIVE_LOW>; /* PG12 */
> +       };
> +};
> +
> +&cpu0 {
> +       cpu-supply = <&reg_vcc_core>;
> +};
> +
> +&dcxo {
> +       clock-frequency = <24000000>;
> +};
> +
> +&ehci1 {
> +       status = "okay";
> +};
> +
> +&mmc0 {
> +       bus-width = <4>;
> +       cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
> +       disable-wp;
> +       vmmc-supply = <&reg_vcc_3v3>;
> +       vqmmc-supply = <&reg_vcc_3v3>;
> +       pinctrl-0 = <&mmc0_pins>;
> +       pinctrl-names = "default";
> +       status = "okay";
> +};
> +
> +&mmc1 {
> +       bus-width = <4>;
> +       mmc-pwrseq = <&wifi_pwrseq>;
> +       non-removable;
> +       vmmc-supply = <&reg_vcc_3v3>;
> +       vqmmc-supply = <&reg_vcc_3v3>;
> +       pinctrl-0 = <&mmc1_pins>;
> +       pinctrl-names = "default";
> +       status = "okay";
> +
> +       rtl8189ftv: wifi@1 {
> +               reg = <1>;
> +               interrupt-parent = <&pio>;
> +               interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 */
> +               interrupt-names = "host-wake";
> +       };
> +};
> +
> +&ohci1 {
> +       status = "okay";
> +};
> +
> +&pio {
> +       vcc-pe-supply = <&reg_avdd2v8>;
> +};
> +
> +&reg_ldob {
> +       regulator-name = "vcc-dram";
> +       regulator-always-on;
> +       ldo-in-supply = <&reg_vcc_3v3>;
> +};
> +
> +&uart3 {
> +       pinctrl-0 = <&uart3_pb_pins>;
> +       pinctrl-names = "default";
> +       status = "okay";
> +};
> +
> +&usb_otg {
> +       dr_mode = "peripheral";
> +       status = "okay";
> +};
> +
> +&usbphy {
> +       usb1_vbus-supply = <&reg_vcc>;
> +       status = "okay";
> +};
> --
> 2.37.4
>


-- 
Best Regards
 Guo Ren