The node names should be generic and DT schema expects certain pattern: dove-cubox.dtb: leds: 'power' does not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> --- arch/arm/boot/dts/dove-cm-a510.dtsi | 2 +- arch/arm/boot/dts/dove-cubox.dts | 2 +- arch/arm/boot/dts/dove-d2plug.dts | 6 +++--- arch/arm/boot/dts/dove-d3plug.dts | 6 +++--- 4 files changed, 8 insertions(+), 8 deletions(-) diff --git a/arch/arm/boot/dts/dove-cm-a510.dtsi b/arch/arm/boot/dts/dove-cm-a510.dtsi index 9b9dfbe07be4..0af9e9fda7d3 100644 --- a/arch/arm/boot/dts/dove-cm-a510.dtsi +++ b/arch/arm/boot/dts/dove-cm-a510.dtsi @@ -101,7 +101,7 @@ leds { pinctrl-0 = <&pmx_nand_gpo>; pinctrl-names = "default"; - system { + led-system { label = "cm-a510:system:green"; gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>; default-state = "keep"; diff --git a/arch/arm/boot/dts/dove-cubox.dts b/arch/arm/boot/dts/dove-cubox.dts index 2639b9fe0ab4..c0e8d6bc4083 100644 --- a/arch/arm/boot/dts/dove-cubox.dts +++ b/arch/arm/boot/dts/dove-cubox.dts @@ -21,7 +21,7 @@ leds { pinctrl-0 = <&pmx_gpio_18>; pinctrl-names = "default"; - power { + led-power { label = "Power"; gpios = <&gpio0 18 1>; default-state = "keep"; diff --git a/arch/arm/boot/dts/dove-d2plug.dts b/arch/arm/boot/dts/dove-d2plug.dts index a0e8996c2ffd..79ee2b32409d 100644 --- a/arch/arm/boot/dts/dove-d2plug.dts +++ b/arch/arm/boot/dts/dove-d2plug.dts @@ -21,17 +21,17 @@ leds { pinctrl-0 = <&pmx_gpio_0 &pmx_gpio_1 &pmx_gpio_2>; pinctrl-names = "default"; - wlan-ap { + led-wlan-ap { label = "wlan-ap"; gpios = <&gpio0 0 1>; }; - wlan-act { + led-wlan-act { label = "wlan-act"; gpios = <&gpio0 1 1>; }; - bluetooth-act { + led-bluetooth-act { label = "bt-act"; gpios = <&gpio0 2 1>; }; diff --git a/arch/arm/boot/dts/dove-d3plug.dts b/arch/arm/boot/dts/dove-d3plug.dts index 1e81d1b97055..5aa5d4a7d51d 100644 --- a/arch/arm/boot/dts/dove-d3plug.dts +++ b/arch/arm/boot/dts/dove-d3plug.dts @@ -21,17 +21,17 @@ leds { pinctrl-0 = <&pmx_gpio_0 &pmx_gpio_1 &pmx_gpio_2>; pinctrl-names = "default"; - wlan-act { + led-wlan-act { label = "wlan-act"; gpios = <&gpio0 0 1>; }; - wlan-ap { + led-wlan-ap { label = "wlan-ap"; gpios = <&gpio0 1 1>; }; - status { + led-status { label = "status"; gpios = <&gpio0 2 1>; }; -- 2.34.1